Kaorin/gerber/pcb_back.ngc.tap

( pcb2gcode 2.5.0 )
( Software-independent Gcode )

G94 ( Millimeters per minute feed rate. )
G21 ( Units == Millimeters. )

G90 ( Absolute coordinates. )
G00 S24000 ( RPM spindle speed. )
G64 P0.01016 ( set maximum deviation from commanded toolpath )
G01 F100.00000 ( Feedrate. )


G00 Z5.00000 (Retract to tool change height)
T1
G04 P1.00000 (Wait for spindle to stop)
(MSG, Change tool bit to mill diameter 0.00000mm)
M3 ( Spindle on clockwise. )
G04 P1.00000 (Wait for spindle to get up to speed)
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z5.00000 ( retract )

G00 X-0.00000 Y-4.29463 ( rapid move to begin. )
G01 F50.00000
( Mill infeed pass 1/1 )
G01 Z-0.04000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F100.00000
G01 X-0.00000 Y-4.29463
G01 X-0.00000 Y-26.21836
G01 X-0.48753 Y-26.27313
G01 X-1.66705 Y-26.39598
G01 X-2.37739 Y-26.43137
G01 X-2.86702 Y-26.43137
G01 X-3.21727 Y-26.43995
G01 X-3.78262 Y-26.48636
G01 X-4.41582 Y-26.43198
G01 X-5.12496 Y-26.36340
G01 X-6.01706 Y-26.25860
G01 X-6.86328 Y-25.89873
G01 X-7.70791 Y-25.52101
G01 X-8.51705 Y-25.14318
G01 X-8.51705 Y-35.49998
G01 X-6.01706 Y-35.49998
G01 X-6.01703 Y-32.75233
G01 X-6.01706 Y-35.49998
G01 X-3.78290 Y-35.49998
G01 X-3.77754 Y-34.61614
G01 X-3.76994 Y-34.09823
G01 X-3.74419 Y-33.18797
G01 X-3.72941 Y-32.86216
G01 X-3.70741 Y-32.52031
G01 X-3.68569 Y-32.28411
G01 X-3.64284 Y-31.95897
G01 X-3.60180 Y-31.74545
G01 X-3.55890 Y-31.55124
G01 X-3.53418 Y-31.38462
G01 X-3.52621 Y-31.30367
G01 X-3.51706 Y-31.09775
G01 X-3.51803 Y-30.80842
G01 X-3.52621 Y-30.64180
G01 X-3.53418 Y-30.56085
G01 X-3.55890 Y-30.39422
G01 X-3.61422 Y-30.13713
G01 X-3.64284 Y-29.98650
G01 X-3.66283 Y-29.85041
G01 X-3.69913 Y-29.53337
G01 X-3.72941 Y-29.08295
G01 X-3.74419 Y-28.75709
G01 X-3.76994 Y-27.84724
G01 X-3.77754 Y-27.32933
G01 X-3.78262 Y-26.48636
G01 X-4.41582 Y-26.43198
G01 X-5.12496 Y-26.36340
G01 X-6.01706 Y-26.25860
G01 X-5.12496 Y-26.36340
G01 X-4.41582 Y-26.43198
G01 X-3.78262 Y-26.48636
G01 X-3.21727 Y-26.43995
G01 X-2.86702 Y-26.43137
G01 X-2.37739 Y-26.43137
G01 X-1.66705 Y-26.39598
G01 X-0.48753 Y-26.27313
G01 X-0.00000 Y-26.21836
G01 X-0.00000 Y-35.49998
G01 X-26.41999 Y-35.49998
G01 X-26.31049 Y-35.23999
G01 X-26.21321 Y-34.98786
G01 X-26.11852 Y-34.67656
G01 X-26.04757 Y-34.33346
G01 X-26.01227 Y-34.00029
G01 X-26.00640 Y-33.81101
G01 X-26.00640 Y-33.53996
G01 X-25.98202 Y-33.16646
G01 X-25.90876 Y-32.79295
G01 X-26.02812 Y-32.14436
G01 X-26.11910 Y-31.73176
G01 X-26.48951 Y-31.74685
G01 X-26.87721 Y-31.77197
G01 X-27.08397 Y-31.79077
G01 X-27.34150 Y-31.82178
G01 X-27.59875 Y-31.86826
G01 X-27.83185 Y-31.91914
G01 X-27.99850 Y-31.94385
G01 X-28.07952 Y-31.95185
G01 X-28.28544 Y-31.96102
G01 X-28.53545 Y-31.96102
G01 X-28.74137 Y-31.95185
G01 X-28.82242 Y-31.94385
G01 X-28.98905 Y-31.91914
G01 X-29.22214 Y-31.86826
G01 X-29.47957 Y-31.82175
G01 X-29.73659 Y-31.79082
G01 X-29.94368 Y-31.77197
G01 X-30.41447 Y-31.74187
G01 X-30.62498 Y-31.73341
G01 X-31.53420 Y-31.70796
G01 X-32.07901 Y-31.69912
G01 X-32.48609 Y-31.69879
G01 X-32.76427 Y-30.59041
G01 X-32.85650 Y-30.20169
G01 X-32.99031 Y-29.66944
G01 X-33.03801 Y-29.46103
G01 X-32.99031 Y-29.66944
G01 X-32.85650 Y-30.20169
G01 X-32.76427 Y-30.59041
G01 X-32.48609 Y-31.69879
G01 X-32.48790 Y-32.29496
G01 X-32.48142 Y-32.73999
G01 X-32.48142 Y-33.23996
G01 X-32.48889 Y-33.54436
G01 X-32.54819 Y-34.56455
G01 X-32.58490 Y-35.49998
G01 X-26.41999 Y-35.49998
G01 X-47.99998 Y-35.49998
G01 X-47.99998 Y0.00000
G01 X-34.62139 Y0.00000
G01 X-34.63211 Y-1.07432
G01 X-34.65784 Y-1.98326
G01 X-34.67265 Y-2.30904
G01 X-34.69462 Y-2.65120
G01 X-34.71636 Y-2.88737
G01 X-34.75924 Y-3.21277
G01 X-34.80026 Y-3.42593
G01 X-34.84316 Y-3.62011
G01 X-34.86788 Y-3.78673
G01 X-34.87585 Y-3.86771
G01 X-34.88502 Y-4.07365
G01 X-34.88403 Y-4.36293
G01 X-34.87585 Y-4.52956
G01 X-34.86788 Y-4.61053
G01 X-34.84316 Y-4.77716
G01 X-34.78781 Y-5.03436
G01 X-34.75924 Y-5.18457
G01 X-34.73915 Y-5.32133
G01 X-34.70288 Y-5.63839
G01 X-34.67872 Y-6.01066
G01 X-34.77181 Y-6.07004
G01 X-34.79528 Y-6.43359
G01 X-34.83155 Y-6.75041
G01 X-34.85162 Y-6.88711
G01 X-34.88022 Y-7.03732
G01 X-34.93552 Y-7.29442
G01 X-34.96020 Y-7.46102
G01 X-34.96821 Y-7.54202
G01 X-34.97638 Y-7.70865
G01 X-34.97638 Y-8.03727
G01 X-34.96821 Y-8.20390
G01 X-34.96023 Y-8.28484
G01 X-34.93552 Y-8.45147
G01 X-34.89256 Y-8.64593
G01 X-34.85162 Y-8.85888
G01 X-34.83158 Y-8.99528
G01 X-34.79526 Y-9.31271
G01 X-34.76503 Y-9.76241
G01 X-34.75025 Y-10.08822
G01 X-34.71807 Y-11.30463
G01 X-34.43150 Y-11.40818
G01 X-34.17049 Y-11.49657
G01 X-33.35279 Y-10.95136
G01 X-32.47738 Y-10.37819
G01 X-32.47738 Y-6.06941
G01 X-32.38500 Y-6.00217
G01 X-32.38500 Y0.00000
G01 X-34.62139 Y0.00000
G01 X-21.15939 Y0.00000
G01 X-21.17006 Y-1.07160
G01 X-21.19587 Y-1.98194
G01 X-21.21065 Y-2.30767
G01 X-21.23260 Y-2.64940
G01 X-21.25431 Y-2.88557
G01 X-21.29721 Y-3.21104
G01 X-21.33824 Y-3.42425
G01 X-21.38111 Y-3.61838
G01 X-21.40582 Y-3.78503
G01 X-21.41383 Y-3.86603
G01 X-21.42299 Y-4.07195
G01 X-21.42200 Y-4.36128
G01 X-21.41383 Y-4.52791
G01 X-21.40582 Y-4.60896
G01 X-21.38111 Y-4.77558
G01 X-21.33824 Y-4.96969
G01 X-21.29721 Y-5.18282
G01 X-21.27710 Y-5.31985
G01 X-21.24090 Y-5.63636
G01 X-21.21063 Y-6.08658
G01 X-21.19582 Y-6.41233
G01 X-21.18393 Y-6.87464
G01 X-20.53674 Y-7.06839
G01 X-20.44990 Y-7.54631
G01 X-20.41152 Y-7.78797
G01 X-20.27644 Y-8.56247
G01 X-20.13301 Y-9.43676
G01 X-20.00164 Y-10.26998
G01 X-20.13301 Y-9.43676
G01 X-20.27644 Y-8.56247
G01 X-20.41152 Y-7.78797
G01 X-20.44990 Y-7.54631
G01 X-20.53674 Y-7.06839
G01 X-20.13661 Y-6.93227
G01 X-18.92297 Y-6.50814
G01 X-18.92297 Y0.00000
G01 X-21.15939 Y0.00000
G01 X-16.42298 Y0.00000
G01 X-16.42298 Y-6.51109
G01 X-17.27736 Y-6.81744
G01 X-17.27736 Y-13.27645
G01 X-16.34594 Y-14.12751
G01 X-15.98579 Y-14.46456
G01 X-15.78536 Y-14.64434
G01 X-15.30459 Y-15.09583
G01 X-14.73738 Y-15.61346
G01 X-14.73738 Y-6.81424
G01 X-13.92298 Y-6.51452
G01 X-13.92298 Y0.00000
G01 X-16.42298 Y0.00000
G01 X-0.00000 Y0.00000
G01 X-0.00000 Y-4.29463
G01 X-9.46483 Y-4.29463
G01 X-9.81606 Y-5.91901
G01 X-9.55782 Y-6.26054
G01 X-9.31763 Y-6.56821
G01 X-9.18510 Y-6.74581
G01 X-8.29711 Y-7.89762
G01 X-8.16491 Y-8.07474
G01 X-7.92483 Y-8.38228
G01 X-7.75871 Y-8.60417
G01 X-7.47588 Y-8.96663
G01 X-7.24083 Y-9.27933
G01 X-6.76643 Y-9.89233
G01 X-6.17093 Y-10.39216
G01 X-5.82694 Y-10.68997
G01 X-5.28498 Y-11.14036
G01 X-5.08048 Y-11.39213
G01 X-3.13817 Y-11.25504
G01 X-2.75516 Y-11.29109
G01 X-2.32496 Y-11.32550
G01 X-1.63591 Y-11.40305
G01 X-1.46926 Y-11.42776
G01 X-0.62499 Y-11.58994
G01 X-0.00000 Y-11.73053
G01 X-0.62499 Y-11.58994
G01 X-1.46926 Y-11.42776
G01 X-1.63591 Y-11.40305
G01 X-2.32496 Y-11.32550
G01 X-2.75516 Y-11.29109
G01 X-3.13817 Y-11.25504
G01 X-3.11300 Y-8.90425
G01 X-3.09824 Y-8.37870
G01 X-3.06151 Y-7.60367
G01 X-3.03677 Y-7.29648
G01 X-3.00284 Y-7.00796
G01 X-2.96583 Y-6.79039
G01 X-2.93149 Y-6.64009
G01 X-2.84747 Y-6.36181
G01 X-2.80571 Y-6.19521
G01 X-2.78727 Y-6.10271
G01 X-2.76255 Y-5.93606
G01 X-2.75417 Y-5.85114
G01 X-2.74599 Y-5.68452
G01 X-2.74599 Y-5.60200
G01 X-2.75417 Y-5.43535
G01 X-2.76255 Y-5.35043
G01 X-2.78727 Y-5.18378
G01 X-2.80571 Y-5.09128
G01 X-2.84747 Y-4.92468
G01 X-2.93149 Y-4.64637
G01 X-2.96581 Y-4.49623
G01 X-3.00088 Y-4.29463
G01 X-2.96581 Y-4.09306
G01 X-2.93149 Y-3.94292
G01 X-2.84747 Y-3.66458
G01 X-2.80571 Y-3.49794
G01 X-2.78727 Y-3.40550
G01 X-2.76255 Y-3.23886
G01 X-2.75417 Y-3.15394
G01 X-2.74599 Y-2.98729
G01 X-2.74599 Y-2.90477
G01 X-2.75417 Y-2.73815
G01 X-2.76255 Y-2.65323
G01 X-2.78727 Y-2.48658
G01 X-2.80571 Y-2.39413
G01 X-2.84747 Y-2.22748
G01 X-2.93149 Y-1.94912
G01 X-2.96581 Y-1.79901
G01 X-3.00281 Y-1.58143
G01 X-3.03680 Y-1.29250
G01 X-3.06151 Y-0.98527
G01 X-3.09824 Y-0.21059
G01 X-3.10416 Y0.00000
G01 X-5.28498 Y0.00000
G01 X-5.28498 Y-11.14036
G01 X-5.08048 Y-11.39213
G01 X-5.37545 Y-11.81547
G01 X-5.64294 Y-12.23884
G01 X-6.29823 Y-13.32469
G01 X-6.70657 Y-13.97170
G01 X-7.19864 Y-14.71734
G01 X-7.83077 Y-15.62585
G01 X-8.47103 Y-16.50228
G01 X-9.17948 Y-17.43753
G01 X-9.77806 Y-18.20497
G01 X-10.07735 Y-18.46522
G01 X-10.49889 Y-18.84256
G01 X-11.06658 Y-19.37984
G01 X-11.05446 Y-20.32803
G01 X-11.13589 Y-21.16498
G01 X-11.22543 Y-21.89843
G01 X-11.24869 Y-22.05525
G01 X-11.37044 Y-22.75771
G01 X-12.26081 Y-23.27971
G01 X-13.04978 Y-23.75065
G01 X-13.51704 Y-24.02228
G01 X-14.03010 Y-24.21506
G01 X-14.79062 Y-24.49048
G01 X-15.36601 Y-24.70554
G01 X-15.85864 Y-25.24732
G01 X-16.24640 Y-25.68374
G01 X-16.65813 Y-26.13467
G01 X-17.11063 Y-26.63914
G01 X-18.24700 Y-27.88384
G01 X-19.01269 Y-28.71300
G01 X-19.33418 Y-30.57997
G01 X-19.27901 Y-31.09775
G01 X-19.14078 Y-32.73776
G01 X-18.98985 Y-33.26000
G01 X-18.91347 Y-33.53996
G01 X-18.70159 Y-34.21918
G01 X-18.64197 Y-34.38581
G01 X-18.47700 Y-34.81288
G01 X-18.16875 Y-35.49998
G01 X-18.47700 Y-34.81288
G01 X-18.64197 Y-34.38581
G01 X-18.70159 Y-34.21918
G01 X-18.91347 Y-33.53996
G01 X-18.98985 Y-33.26000
G01 X-19.14078 Y-32.73776
G01 X-20.46757 Y-32.75198
G01 X-20.99292 Y-32.76671
G01 X-21.76683 Y-32.80341
G01 X-22.07400 Y-32.82815
G01 X-22.36264 Y-32.86211
G01 X-22.58027 Y-32.89912
G01 X-22.73049 Y-32.93346
G01 X-23.00882 Y-33.01749
G01 X-23.17547 Y-33.05924
G01 X-23.26790 Y-33.07768
G01 X-23.43452 Y-33.10240
G01 X-23.51946 Y-33.11078
G01 X-23.68611 Y-33.11896
G01 X-23.76863 Y-33.11896
G01 X-23.93528 Y-33.11078
G01 X-24.02022 Y-33.10240
G01 X-24.18685 Y-33.07768
G01 X-24.27928 Y-33.05924
G01 X-24.44593 Y-33.01749
G01 X-24.72426 Y-32.93346
G01 X-24.87447 Y-32.89912
G01 X-25.09210 Y-32.86211
G01 X-25.38075 Y-32.82815
G01 X-25.68791 Y-32.80341
G01 X-25.90876 Y-32.79295
G01 X-26.02812 Y-32.14436
G01 X-26.11910 Y-31.73176
G01 X-25.83162 Y-30.57997
G01 X-26.17500 Y-29.46100
G01 X-25.63437 Y-27.21884
G01 X-24.50567 Y-27.03119
G01 X-23.56996 Y-26.86159
G01 X-22.96604 Y-26.74562
G01 X-23.56996 Y-26.86159
G01 X-24.50567 Y-27.03119
G01 X-25.63437 Y-27.21884
G01 X-25.95946 Y-26.87317
G01 X-26.66538 Y-26.10571
G01 X-27.33429 Y-25.36317
G01 X-28.01323 Y-24.59672
G01 X-28.53545 Y-23.99121
G01 X-29.97898 Y-22.23089
G01 X-30.31086 Y-22.07372
G01 X-30.80885 Y-21.83061
G01 X-31.29514 Y-22.20808
G01 X-33.35172 Y-23.82667
G01 X-35.29381 Y-25.36998
G01 X-47.99998 Y-25.36998
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z5.00000 ( retract )

G00 X-41.14739 Y-35.49998 ( rapid move to begin. )
G01 F50.00000
( Mill infeed pass 1/1 )
G01 Z-0.04000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F100.00000
G01 X-41.14739 Y-35.49998
G01 X-41.14736 Y-19.05599
G01 X-41.61427 Y-18.50238
G01 X-41.81030 Y-18.28609
G01 X-42.07807 Y-17.99999
G01 X-42.50548 Y-17.49996
G01 X-42.66042 Y-17.29753
G01 X-42.79420 Y-17.11371
G01 X-43.02155 Y-16.78445
G01 X-43.13286 Y-16.61338
G01 X-43.30962 Y-16.32425
G01 X-43.40700 Y-16.15399
G01 X-43.56412 Y-15.85968
G01 X-43.65374 Y-15.67965
G01 X-43.90636 Y-15.13870
G01 X-44.12564 Y-14.72976
G01 X-44.24314 Y-14.53373
G01 X-44.56793 Y-14.04930
G01 X-44.85787 Y-13.66500
G01 X-45.19905 Y-13.23525
G01 X-45.37372 Y-13.00853
G01 X-46.16516 Y-11.95050
G01 X-46.39274 Y-11.63945
G01 X-47.01868 Y-10.76551
G01 X-47.99998 Y-10.70404
G01 X-47.01868 Y-10.76551
G01 X-45.14873 Y-10.04578
G01 X-44.54873 Y-9.83872
G01 X-43.94873 Y-9.67415
G01 X-43.02806 Y-9.45703
G01 X-42.46626 Y-9.43966
G01 X-41.92735 Y-9.43193
G01 X-41.63294 Y-9.42259
G01 X-41.26771 Y-9.40232
G01 X-40.67823 Y-8.58172
G01 X-40.23490 Y-7.92053
G01 X-40.13502 Y-7.75388
G01 X-39.83025 Y-7.18548
G01 X-39.47315 Y-6.46156
G01 X-39.19944 Y-5.93580
G01 X-36.81969 Y-6.03372
G01 X-35.62739 Y-6.03580
G01 X-34.77181 Y-6.07004
G01 X-34.67872 Y-6.01066
G01 X-34.44418 Y-6.01398
G01 X-32.47738 Y-6.06941
G01 X-32.38500 Y-6.00217
G01 X-29.97738 Y-6.06941
G01 X-29.88500 Y-6.00220
G01 X-29.88500 Y0.00000
G01 X-25.85905 Y0.00000
G01 X-25.84178 Y-0.80165
G01 X-25.80175 Y-1.85608
G01 X-25.75669 Y-2.62964
G01 X-25.72024 Y-3.10218
G01 X-25.68435 Y-3.47195
G01 X-25.66731 Y-3.69763
G01 X-25.65400 Y-4.07365
G01 X-25.65400 Y-4.32361
G01 X-25.66731 Y-4.69963
G01 X-25.68402 Y-4.92196
G01 X-25.72001 Y-5.29516
G01 X-25.75613 Y-5.76791
G01 X-25.77678 Y-6.11739
G01 X-25.40048 Y-6.82584
G01 X-25.13079 Y-7.31002
G01 X-24.94684 Y-7.62907
G01 X-25.03642 Y-7.99795
G01 X-25.24742 Y-8.96201
G01 X-24.69693 Y-9.72861
G01 X-24.03749 Y-10.66074
G01 X-23.09990 Y-12.01499
G01 X-21.12607 Y-12.01499
G01 X-20.62958 Y-11.25118
G01 X-20.00164 Y-10.26998
G01 X-12.44206 Y-10.26996
G01 X-12.37546 Y-10.19909
G01 X-12.19738 Y-10.02528
G01 X-11.92436 Y-10.08344
G01 X-11.64585 Y-10.16752
G01 X-11.47923 Y-10.20925
G01 X-11.38690 Y-10.22767
G01 X-11.22030 Y-10.25238
G01 X-11.13528 Y-10.26079
G01 X-10.96863 Y-10.26897
G01 X-10.88611 Y-10.26897
G01 X-10.71946 Y-10.26079
G01 X-10.63445 Y-10.25238
G01 X-10.46785 Y-10.22767
G01 X-10.37552 Y-10.20925
G01 X-10.20889 Y-10.16752
G01 X-9.93038 Y-10.08344
G01 X-9.78035 Y-10.04913
G01 X-9.56277 Y-10.01212
G01 X-9.27400 Y-9.97816
G01 X-8.96683 Y-9.95342
G01 X-8.19292 Y-9.91672
G01 X-7.66757 Y-9.90199
G01 X-6.76643 Y-9.89233
G01 X-7.24083 Y-9.27933
G01 X-7.47588 Y-8.96663
G01 X-7.75871 Y-8.60417
G01 X-7.92483 Y-8.38228
G01 X-8.16491 Y-8.07474
G01 X-8.29711 Y-7.89762
G01 X-9.18510 Y-6.74581
G01 X-9.31763 Y-6.56821
G01 X-9.55782 Y-6.26054
G01 X-9.81606 Y-5.91901
G01 X-9.46483 Y-4.29463
G01 X-9.58276 Y-3.68389
G01 X-10.25832 Y0.00000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z5.00000 ( retract )

G00 X-9.77806 Y-18.20497 ( rapid move to begin. )
G01 F50.00000
( Mill infeed pass 1/1 )
G01 Z-0.04000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F100.00000
G01 X-9.77806 Y-18.20497
G01 X-0.00000 Y-18.20497
G01 X-0.00000 Y-20.37791
G01 X-0.49192 Y-20.39170
G01 X-1.26695 Y-20.42843
G01 X-1.57414 Y-20.45317
G01 X-1.86266 Y-20.48711
G01 X-2.08023 Y-20.52411
G01 X-2.23037 Y-20.55843
G01 X-2.50888 Y-20.64253
G01 X-2.67551 Y-20.68426
G01 X-2.76791 Y-20.70268
G01 X-2.93456 Y-20.72739
G01 X-3.01948 Y-20.73577
G01 X-3.18610 Y-20.74395
G01 X-3.26862 Y-20.74395
G01 X-3.43527 Y-20.73577
G01 X-3.52019 Y-20.72739
G01 X-3.68684 Y-20.70268
G01 X-3.77927 Y-20.68424
G01 X-3.94586 Y-20.64250
G01 X-4.22435 Y-20.55843
G01 X-4.37439 Y-20.52414
G01 X-4.59196 Y-20.48713
G01 X-4.88061 Y-20.45317
G01 X-5.18780 Y-20.42843
G01 X-5.96283 Y-20.39170
G01 X-6.48838 Y-20.37695
G01 X-11.05446 Y-20.32803
G01 X-11.06658 Y-19.37984
G01 X-11.61077 Y-18.87629
G01 X-12.59967 Y-18.00116
G01 X-13.84973 Y-17.16789
G01 X-20.25124 Y-17.16789
G01 X-20.42447 Y-17.08249
G01 X-21.91052 Y-17.17497
G01 X-22.96604 Y-17.25115
G01 X-23.85289 Y-16.77121
G01 X-28.36735 Y-17.89369
G01 X-30.66418 Y-20.71873
G01 X-30.70690 Y-21.02709
G01 X-30.80885 Y-21.83061
G01 X-30.31086 Y-22.07372
G01 X-29.97898 Y-22.23089
G01 X-20.20659 Y-22.23089
G01 X-19.23026 Y-22.72055
G01 X-17.78284 Y-23.45779
G01 X-15.36601 Y-24.70554
G01 X-14.79062 Y-24.49048
G01 X-14.03010 Y-24.21506
G01 X-13.51704 Y-24.02228
G01 X-13.51704 Y-35.49998
G01 X-11.01705 Y-35.49998
G01 X-11.01702 Y-23.15355
G01 X-11.37044 Y-22.75771
G01 X-11.01702 Y-23.15355
G01 X-10.39086 Y-23.66447
G01 X-9.23420 Y-24.58712
G01 X-8.51705 Y-25.14318
G01 X-7.70791 Y-25.52101
G01 X-6.86328 Y-25.89873
G01 X-6.01706 Y-26.25860
G01 X-6.01703 Y-32.75233
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z5.00000 ( retract )

G00 X-20.20659 Y-22.23089 ( rapid move to begin. )
G01 F50.00000
( Mill infeed pass 1/1 )
G01 Z-0.04000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F100.00000
G01 X-20.20659 Y-22.23089
G01 X-20.20034 Y-21.77268
G01 X-20.18795 Y-21.42122
G01 X-20.17570 Y-20.77705
G01 X-20.16928 Y-20.13318
G01 X-20.16963 Y-19.74230
G01 X-20.17626 Y-19.25071
G01 X-20.18652 Y-18.86496
G01 X-20.22208 Y-17.87296
G01 X-20.24578 Y-17.40311
G01 X-20.25124 Y-17.16789
G01 X-20.42447 Y-17.08249
G01 X-20.39823 Y-16.67744
G01 X-20.38027 Y-16.28008
G01 X-20.22566 Y-13.38402
G01 X-20.20120 Y-12.99380
G01 X-21.12607 Y-12.01499
G01 X-20.20120 Y-12.99380
G01 X-19.45315 Y-13.05799
G01 X-18.77698 Y-13.12123
G01 X-17.97764 Y-13.20096
G01 X-17.27736 Y-13.27645
G01 X-16.34594 Y-14.12751
G01 X-15.98579 Y-14.46456
G01 X-15.78536 Y-14.64434
G01 X-15.30459 Y-15.09583
G01 X-14.73738 Y-15.61346
G01 X-14.47721 Y-16.07632
G01 X-14.06738 Y-16.78214
G01 X-13.84973 Y-17.16789
G01 X-12.59967 Y-18.00116
G01 X-12.56535 Y-14.79934
G01 X-12.55062 Y-14.27416
G01 X-12.51394 Y-13.50071
G01 X-12.48921 Y-13.19347
G01 X-12.45522 Y-12.90457
G01 X-12.41821 Y-12.68700
G01 X-12.38392 Y-12.53696
G01 X-12.29985 Y-12.25847
G01 X-12.25812 Y-12.09187
G01 X-12.23970 Y-11.99949
G01 X-12.21496 Y-11.83287
G01 X-12.20658 Y-11.74788
G01 X-12.19838 Y-11.58123
G01 X-12.19838 Y-11.49871
G01 X-12.20658 Y-11.33208
G01 X-12.21496 Y-11.24709
G01 X-12.23970 Y-11.08047
G01 X-12.25809 Y-10.98812
G01 X-12.29982 Y-10.82149
G01 X-12.38392 Y-10.54298
G01 X-12.44206 Y-10.26996
G01 X-12.37546 Y-10.19909
G01 X-12.19738 Y-10.02528
G01 X-12.19738 Y-6.81055
G01 X-10.91722 Y-6.32991
G01 X-10.74202 Y-6.26775
G01 X-10.35228 Y-6.11886
G01 X-10.11474 Y-6.03400
G01 X-9.81606 Y-5.91901
G01 X-10.11474 Y-6.03400
G01 X-10.35228 Y-6.11886
G01 X-10.74202 Y-6.26775
G01 X-10.91722 Y-6.32991
G01 X-12.19738 Y-6.81055
G01 X-13.92298 Y-6.51452
G01 X-14.73738 Y-6.81424
G01 X-16.42298 Y-6.51109
G01 X-17.27736 Y-6.81744
G01 X-18.92297 Y-6.50814
G01 X-20.13661 Y-6.93227
G01 X-20.53674 Y-7.06839
G01 X-21.18393 Y-6.87464
G01 X-21.49584 Y-6.90888
G01 X-22.07298 Y-6.95622
G01 X-22.41113 Y-6.99028
G01 X-22.56798 Y-7.01355
G01 X-22.93640 Y-7.08703
G01 X-23.09322 Y-7.12633
G01 X-23.65565 Y-7.28894
G01 X-24.15047 Y-7.42500
G01 X-24.94684 Y-7.62907
G01 X-25.03642 Y-7.99795
G01 X-25.24742 Y-8.96201
G01 X-25.93101 Y-9.39828
G01 X-26.93579 Y-10.05020
G01 X-27.51346 Y-10.43295
G01 X-28.36977 Y-11.01060
G01 X-28.36735 Y-17.89369
G01 X-30.66418 Y-20.71873
G01 X-31.52379 Y-19.43042
G01 X-32.24985 Y-18.32793
G01 X-32.46130 Y-17.99999
G01 X-32.58546 Y-17.80040
G01 X-32.76242 Y-17.49996
G01 X-32.96724 Y-17.13258
G01 X-33.35785 Y-16.41241
G01 X-33.36656 Y-16.01559
G01 X-33.37725 Y-14.85674
G01 X-33.37725 Y-14.17320
G01 X-33.37100 Y-13.44844
G01 X-33.74217 Y-12.55629
G01 X-34.17049 Y-11.49657
G01 X-34.43150 Y-11.40818
G01 X-34.71807 Y-11.30463
G01 X-35.10724 Y-11.29347
G01 X-35.76074 Y-11.26228
G01 X-36.23401 Y-11.26228
G01 X-36.40064 Y-11.27046
G01 X-36.82738 Y-11.31026
G01 X-37.26739 Y-11.36208
G01 X-37.26739 Y-15.72514
G01 X-37.26739 Y-11.36208
G01 X-37.61080 Y-11.26620
G01 X-38.28125 Y-11.06421
G01 X-38.98334 Y-10.83683
G01 X-39.43322 Y-10.68149
G01 X-40.22738 Y-10.16925
G01 X-40.74531 Y-9.81210
G01 X-41.26771 Y-9.40232
G01 X-41.63294 Y-9.42259
G01 X-41.92735 Y-9.43193
G01 X-42.46626 Y-9.43966
G01 X-43.02806 Y-9.45703
G01 X-43.03822 Y-7.86902
G01 X-43.04581 Y-7.35112
G01 X-43.07159 Y-6.44088
G01 X-43.08638 Y-6.11508
G01 X-43.10835 Y-5.77319
G01 X-43.13006 Y-5.53700
G01 X-43.17296 Y-5.21155
G01 X-43.21391 Y-4.99859
G01 X-43.25686 Y-4.80413
G01 X-43.28157 Y-4.63751
G01 X-43.28955 Y-4.55656
G01 X-43.29872 Y-4.35064
G01 X-43.29773 Y-4.01132
G01 X-43.28955 Y-3.84470
G01 X-43.28157 Y-3.76372
G01 X-43.25686 Y-3.59710
G01 X-43.20593 Y-3.36365
G01 X-43.15953 Y-3.10685
G01 X-43.12849 Y-2.84930
G01 X-43.10969 Y-2.64241
G01 X-43.08452 Y-2.25392
G01 X-43.07114 Y-1.96118
G01 X-43.04566 Y-1.05065
G01 X-43.03682 Y-0.50561
G01 X-43.03601 Y0.00000
G01 X-39.28008 Y0.00000
G01 X-39.26665 Y-0.79220
G01 X-39.23160 Y-1.84633
G01 X-39.19024 Y-2.61724
G01 X-39.15613 Y-3.08590
G01 X-39.12001 Y-3.47365
G01 X-39.10513 Y-3.67701
G01 X-39.09187 Y-4.05064
G01 X-39.09187 Y-4.35064
G01 X-39.10513 Y-4.72427
G01 X-39.11963 Y-4.92364
G01 X-39.15583 Y-5.31543
G01 X-39.19944 Y-5.93580
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z5.00000 ( retract )

G00 X-25.77678 Y-6.11739 ( rapid move to begin. )
G01 F50.00000
( Mill infeed pass 1/1 )
G01 Z-0.04000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F100.00000
G01 X-25.77678 Y-6.11739
G01 X-26.34348 Y-6.09653
G01 X-26.83525 Y-6.08752
G01 X-27.08819 Y-6.07703
G01 X-27.45842 Y-6.07027
G01 X-27.61061 Y-6.06328
G01 X-27.91836 Y-6.05760
G01 X-29.88500 Y-6.00220
G01 X-29.97738 Y-6.06941
G01 X-29.97738 Y-10.19023
G01 X-29.07198 Y-10.64692
G01 X-28.36977 Y-11.01060
G01 X-29.07198 Y-10.64692
G01 X-29.97738 Y-10.19023
G01 X-30.92181 Y-10.25060
G01 X-31.36880 Y-10.28370
G01 X-32.47738 Y-10.37819
G01 X-33.35279 Y-10.95136
G01 X-34.17049 Y-11.49657
G01 X-34.43150 Y-11.40818
G01 X-34.71807 Y-11.30463
G01 X-35.10724 Y-11.29347
G01 X-35.76074 Y-11.26228
G01 X-36.23401 Y-11.26228
G01 X-36.40064 Y-11.27046
G01 X-36.82738 Y-11.31026
G01 X-37.26739 Y-11.36208
G01 X-37.61080 Y-11.26620
G01 X-38.28125 Y-11.06421
G01 X-38.98334 Y-10.83683
G01 X-39.43322 Y-10.68149
G01 X-39.43937 Y-11.25438
G01 X-39.45410 Y-11.77978
G01 X-39.49083 Y-12.55420
G01 X-39.51554 Y-12.86144
G01 X-39.54953 Y-13.15037
G01 X-39.58653 Y-13.36794
G01 X-39.62082 Y-13.51798
G01 X-39.70492 Y-13.79649
G01 X-39.74666 Y-13.96312
G01 X-39.76507 Y-14.05552
G01 X-39.78979 Y-14.22217
G01 X-39.79817 Y-14.30708
G01 X-39.80635 Y-14.47371
G01 X-39.80635 Y-14.55623
G01 X-39.79817 Y-14.72288
G01 X-39.78979 Y-14.80779
G01 X-39.76507 Y-14.97444
G01 X-39.74663 Y-15.06687
G01 X-39.70490 Y-15.23347
G01 X-39.62082 Y-15.51196
G01 X-39.58653 Y-15.66200
G01 X-39.54953 Y-15.87957
G01 X-39.51554 Y-16.16847
G01 X-39.49080 Y-16.47571
G01 X-39.46042 Y-17.11602
G01 X-39.60167 Y-17.30047
G01 X-39.76243 Y-17.49996
G01 X-40.21242 Y-17.99999
G01 X-40.48483 Y-18.28653
G01 X-40.68087 Y-18.50283
G01 X-41.14736 Y-19.05599
G01 X-40.68087 Y-18.50283
G01 X-40.48483 Y-18.28653
G01 X-40.21242 Y-17.99999
G01 X-39.76243 Y-17.49996
G01 X-39.60167 Y-17.30047
G01 X-39.46042 Y-17.11602
G01 X-39.18786 Y-16.94556
G01 X-39.03594 Y-16.85663
G01 X-38.17302 Y-16.31716
G01 X-37.79754 Y-16.07604
G01 X-37.26739 Y-15.72514
G01 X-36.79424 Y-15.82920
G01 X-36.50135 Y-15.88912
G01 X-35.76444 Y-16.02989
G01 X-34.82320 Y-16.18717
G01 X-34.72213 Y-16.20012
G01 X-34.11949 Y-16.29725
G01 X-33.92698 Y-16.32199
G01 X-33.60555 Y-16.37022
G01 X-33.35785 Y-16.41241
G01 X-33.36656 Y-16.01559
G01 X-33.37725 Y-14.85674
G01 X-33.37725 Y-14.17320
G01 X-33.37100 Y-13.44844
G01 X-28.36977 Y-13.44290
G01 X-28.36735 Y-13.44856
G01 X-23.83379 Y-13.44346
G01 X-23.55723 Y-12.91184
G01 X-23.09990 Y-12.01499
G01 X-23.55723 Y-12.91184
G01 X-23.83379 Y-13.44346
G01 X-23.82738 Y-14.24894
G01 X-23.82937 Y-15.19271
G01 X-23.84316 Y-16.35275
G01 X-23.85289 Y-16.77121
G01 X-22.96604 Y-17.25115
G01 X-22.96604 Y-26.74562
G01 X-22.41494 Y-27.03152
G01 X-21.42795 Y-27.53083
G01 X-19.96021 Y-28.25402
G01 X-19.48635 Y-28.47917
G01 X-19.01269 Y-28.71300
G01 X-19.33418 Y-30.57997
G01 X-25.83162 Y-30.57997
G01 X-26.17500 Y-29.46100
G01 X-33.03801 Y-29.46103
G01 X-33.33145 Y-28.93921
G01 X-33.89277 Y-27.92547
G01 X-35.29381 Y-25.36998

G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z5.000000 ( retract )

G04 P1.000000
M9 ( Coolant off. )