( pcb2gcode 2.5.0 ) ( Software-independent Gcode ) G94 ( Millimeters per minute feed rate. ) G21 ( Units == Millimeters. ) G90 ( Absolute coordinates. ) G00 S24000 ( RPM spindle speed. ) G64 P0.01016 ( set maximum deviation from commanded toolpath ) G01 F100.00000 ( Feedrate. ) G00 Z5.00000 (Retract to tool change height) T1 G04 P1.00000 (Wait for spindle to stop) (MSG, Change tool bit to mill diameter 0.00000mm) M3 ( Spindle on clockwise. ) G04 P1.00000 (Wait for spindle to get up to speed) G04 P0 ( dwell for no time -- G64 should not smooth over this point ) G00 Z5.00000 ( retract ) G00 X-0.00000 Y-4.29463 ( rapid move to begin. ) G01 F50.00000 ( Mill infeed pass 1/1 ) G01 Z-0.04000 G04 P0 ( dwell for no time -- G64 should not smooth over this point ) G01 F100.00000 G01 X-0.00000 Y-4.29463 G01 X-0.00000 Y-26.21836 G01 X-0.48753 Y-26.27313 G01 X-1.66705 Y-26.39598 G01 X-2.37739 Y-26.43137 G01 X-2.86702 Y-26.43137 G01 X-3.21727 Y-26.43995 G01 X-3.78262 Y-26.48636 G01 X-4.41582 Y-26.43198 G01 X-5.12496 Y-26.36340 G01 X-6.01706 Y-26.25860 G01 X-6.86328 Y-25.89873 G01 X-7.70791 Y-25.52101 G01 X-8.51705 Y-25.14318 G01 X-8.51705 Y-35.49998 G01 X-6.01706 Y-35.49998 G01 X-6.01703 Y-32.75233 G01 X-6.01706 Y-35.49998 G01 X-3.78290 Y-35.49998 G01 X-3.77754 Y-34.61614 G01 X-3.76994 Y-34.09823 G01 X-3.74419 Y-33.18797 G01 X-3.72941 Y-32.86216 G01 X-3.70741 Y-32.52031 G01 X-3.68569 Y-32.28411 G01 X-3.64284 Y-31.95897 G01 X-3.60180 Y-31.74545 G01 X-3.55890 Y-31.55124 G01 X-3.53418 Y-31.38462 G01 X-3.52621 Y-31.30367 G01 X-3.51706 Y-31.09775 G01 X-3.51803 Y-30.80842 G01 X-3.52621 Y-30.64180 G01 X-3.53418 Y-30.56085 G01 X-3.55890 Y-30.39422 G01 X-3.61422 Y-30.13713 G01 X-3.64284 Y-29.98650 G01 X-3.66283 Y-29.85041 G01 X-3.69913 Y-29.53337 G01 X-3.72941 Y-29.08295 G01 X-3.74419 Y-28.75709 G01 X-3.76994 Y-27.84724 G01 X-3.77754 Y-27.32933 G01 X-3.78262 Y-26.48636 G01 X-4.41582 Y-26.43198 G01 X-5.12496 Y-26.36340 G01 X-6.01706 Y-26.25860 G01 X-5.12496 Y-26.36340 G01 X-4.41582 Y-26.43198 G01 X-3.78262 Y-26.48636 G01 X-3.21727 Y-26.43995 G01 X-2.86702 Y-26.43137 G01 X-2.37739 Y-26.43137 G01 X-1.66705 Y-26.39598 G01 X-0.48753 Y-26.27313 G01 X-0.00000 Y-26.21836 G01 X-0.00000 Y-35.49998 G01 X-26.41999 Y-35.49998 G01 X-26.31049 Y-35.23999 G01 X-26.21321 Y-34.98786 G01 X-26.11852 Y-34.67656 G01 X-26.04757 Y-34.33346 G01 X-26.01227 Y-34.00029 G01 X-26.00640 Y-33.81101 G01 X-26.00640 Y-33.53996 G01 X-25.98202 Y-33.16646 G01 X-25.90876 Y-32.79295 G01 X-26.02812 Y-32.14436 G01 X-26.11910 Y-31.73176 G01 X-26.48951 Y-31.74685 G01 X-26.87721 Y-31.77197 G01 X-27.08397 Y-31.79077 G01 X-27.34150 Y-31.82178 G01 X-27.59875 Y-31.86826 G01 X-27.83185 Y-31.91914 G01 X-27.99850 Y-31.94385 G01 X-28.07952 Y-31.95185 G01 X-28.28544 Y-31.96102 G01 X-28.53545 Y-31.96102 G01 X-28.74137 Y-31.95185 G01 X-28.82242 Y-31.94385 G01 X-28.98905 Y-31.91914 G01 X-29.22214 Y-31.86826 G01 X-29.47957 Y-31.82175 G01 X-29.73659 Y-31.79082 G01 X-29.94368 Y-31.77197 G01 X-30.41447 Y-31.74187 G01 X-30.62498 Y-31.73341 G01 X-31.53420 Y-31.70796 G01 X-32.07901 Y-31.69912 G01 X-32.48609 Y-31.69879 G01 X-32.76427 Y-30.59041 G01 X-32.85650 Y-30.20169 G01 X-32.99031 Y-29.66944 G01 X-33.03801 Y-29.46103 G01 X-32.99031 Y-29.66944 G01 X-32.85650 Y-30.20169 G01 X-32.76427 Y-30.59041 G01 X-32.48609 Y-31.69879 G01 X-32.48790 Y-32.29496 G01 X-32.48142 Y-32.73999 G01 X-32.48142 Y-33.23996 G01 X-32.48889 Y-33.54436 G01 X-32.54819 Y-34.56455 G01 X-32.58490 Y-35.49998 G01 X-26.41999 Y-35.49998 G01 X-47.99998 Y-35.49998 G01 X-47.99998 Y0.00000 G01 X-34.62139 Y0.00000 G01 X-34.63211 Y-1.07432 G01 X-34.65784 Y-1.98326 G01 X-34.67265 Y-2.30904 G01 X-34.69462 Y-2.65120 G01 X-34.71636 Y-2.88737 G01 X-34.75924 Y-3.21277 G01 X-34.80026 Y-3.42593 G01 X-34.84316 Y-3.62011 G01 X-34.86788 Y-3.78673 G01 X-34.87585 Y-3.86771 G01 X-34.88502 Y-4.07365 G01 X-34.88403 Y-4.36293 G01 X-34.87585 Y-4.52956 G01 X-34.86788 Y-4.61053 G01 X-34.84316 Y-4.77716 G01 X-34.78781 Y-5.03436 G01 X-34.75924 Y-5.18457 G01 X-34.73915 Y-5.32133 G01 X-34.70288 Y-5.63839 G01 X-34.67872 Y-6.01066 G01 X-34.77181 Y-6.07004 G01 X-34.79528 Y-6.43359 G01 X-34.83155 Y-6.75041 G01 X-34.85162 Y-6.88711 G01 X-34.88022 Y-7.03732 G01 X-34.93552 Y-7.29442 G01 X-34.96020 Y-7.46102 G01 X-34.96821 Y-7.54202 G01 X-34.97638 Y-7.70865 G01 X-34.97638 Y-8.03727 G01 X-34.96821 Y-8.20390 G01 X-34.96023 Y-8.28484 G01 X-34.93552 Y-8.45147 G01 X-34.89256 Y-8.64593 G01 X-34.85162 Y-8.85888 G01 X-34.83158 Y-8.99528 G01 X-34.79526 Y-9.31271 G01 X-34.76503 Y-9.76241 G01 X-34.75025 Y-10.08822 G01 X-34.71807 Y-11.30463 G01 X-34.43150 Y-11.40818 G01 X-34.17049 Y-11.49657 G01 X-33.35279 Y-10.95136 G01 X-32.47738 Y-10.37819 G01 X-32.47738 Y-6.06941 G01 X-32.38500 Y-6.00217 G01 X-32.38500 Y0.00000 G01 X-34.62139 Y0.00000 G01 X-21.15939 Y0.00000 G01 X-21.17006 Y-1.07160 G01 X-21.19587 Y-1.98194 G01 X-21.21065 Y-2.30767 G01 X-21.23260 Y-2.64940 G01 X-21.25431 Y-2.88557 G01 X-21.29721 Y-3.21104 G01 X-21.33824 Y-3.42425 G01 X-21.38111 Y-3.61838 G01 X-21.40582 Y-3.78503 G01 X-21.41383 Y-3.86603 G01 X-21.42299 Y-4.07195 G01 X-21.42200 Y-4.36128 G01 X-21.41383 Y-4.52791 G01 X-21.40582 Y-4.60896 G01 X-21.38111 Y-4.77558 G01 X-21.33824 Y-4.96969 G01 X-21.29721 Y-5.18282 G01 X-21.27710 Y-5.31985 G01 X-21.24090 Y-5.63636 G01 X-21.21063 Y-6.08658 G01 X-21.19582 Y-6.41233 G01 X-21.18393 Y-6.87464 G01 X-20.53674 Y-7.06839 G01 X-20.44990 Y-7.54631 G01 X-20.41152 Y-7.78797 G01 X-20.27644 Y-8.56247 G01 X-20.13301 Y-9.43676 G01 X-20.00164 Y-10.26998 G01 X-20.13301 Y-9.43676 G01 X-20.27644 Y-8.56247 G01 X-20.41152 Y-7.78797 G01 X-20.44990 Y-7.54631 G01 X-20.53674 Y-7.06839 G01 X-20.13661 Y-6.93227 G01 X-18.92297 Y-6.50814 G01 X-18.92297 Y0.00000 G01 X-21.15939 Y0.00000 G01 X-16.42298 Y0.00000 G01 X-16.42298 Y-6.51109 G01 X-17.27736 Y-6.81744 G01 X-17.27736 Y-13.27645 G01 X-16.34594 Y-14.12751 G01 X-15.98579 Y-14.46456 G01 X-15.78536 Y-14.64434 G01 X-15.30459 Y-15.09583 G01 X-14.73738 Y-15.61346 G01 X-14.73738 Y-6.81424 G01 X-13.92298 Y-6.51452 G01 X-13.92298 Y0.00000 G01 X-16.42298 Y0.00000 G01 X-0.00000 Y0.00000 G01 X-0.00000 Y-4.29463 G01 X-9.46483 Y-4.29463 G01 X-9.81606 Y-5.91901 G01 X-9.55782 Y-6.26054 G01 X-9.31763 Y-6.56821 G01 X-9.18510 Y-6.74581 G01 X-8.29711 Y-7.89762 G01 X-8.16491 Y-8.07474 G01 X-7.92483 Y-8.38228 G01 X-7.75871 Y-8.60417 G01 X-7.47588 Y-8.96663 G01 X-7.24083 Y-9.27933 G01 X-6.76643 Y-9.89233 G01 X-6.17093 Y-10.39216 G01 X-5.82694 Y-10.68997 G01 X-5.28498 Y-11.14036 G01 X-5.08048 Y-11.39213 G01 X-3.13817 Y-11.25504 G01 X-2.75516 Y-11.29109 G01 X-2.32496 Y-11.32550 G01 X-1.63591 Y-11.40305 G01 X-1.46926 Y-11.42776 G01 X-0.62499 Y-11.58994 G01 X-0.00000 Y-11.73053 G01 X-0.62499 Y-11.58994 G01 X-1.46926 Y-11.42776 G01 X-1.63591 Y-11.40305 G01 X-2.32496 Y-11.32550 G01 X-2.75516 Y-11.29109 G01 X-3.13817 Y-11.25504 G01 X-3.11300 Y-8.90425 G01 X-3.09824 Y-8.37870 G01 X-3.06151 Y-7.60367 G01 X-3.03677 Y-7.29648 G01 X-3.00284 Y-7.00796 G01 X-2.96583 Y-6.79039 G01 X-2.93149 Y-6.64009 G01 X-2.84747 Y-6.36181 G01 X-2.80571 Y-6.19521 G01 X-2.78727 Y-6.10271 G01 X-2.76255 Y-5.93606 G01 X-2.75417 Y-5.85114 G01 X-2.74599 Y-5.68452 G01 X-2.74599 Y-5.60200 G01 X-2.75417 Y-5.43535 G01 X-2.76255 Y-5.35043 G01 X-2.78727 Y-5.18378 G01 X-2.80571 Y-5.09128 G01 X-2.84747 Y-4.92468 G01 X-2.93149 Y-4.64637 G01 X-2.96581 Y-4.49623 G01 X-3.00088 Y-4.29463 G01 X-2.96581 Y-4.09306 G01 X-2.93149 Y-3.94292 G01 X-2.84747 Y-3.66458 G01 X-2.80571 Y-3.49794 G01 X-2.78727 Y-3.40550 G01 X-2.76255 Y-3.23886 G01 X-2.75417 Y-3.15394 G01 X-2.74599 Y-2.98729 G01 X-2.74599 Y-2.90477 G01 X-2.75417 Y-2.73815 G01 X-2.76255 Y-2.65323 G01 X-2.78727 Y-2.48658 G01 X-2.80571 Y-2.39413 G01 X-2.84747 Y-2.22748 G01 X-2.93149 Y-1.94912 G01 X-2.96581 Y-1.79901 G01 X-3.00281 Y-1.58143 G01 X-3.03680 Y-1.29250 G01 X-3.06151 Y-0.98527 G01 X-3.09824 Y-0.21059 G01 X-3.10416 Y0.00000 G01 X-5.28498 Y0.00000 G01 X-5.28498 Y-11.14036 G01 X-5.08048 Y-11.39213 G01 X-5.37545 Y-11.81547 G01 X-5.64294 Y-12.23884 G01 X-6.29823 Y-13.32469 G01 X-6.70657 Y-13.97170 G01 X-7.19864 Y-14.71734 G01 X-7.83077 Y-15.62585 G01 X-8.47103 Y-16.50228 G01 X-9.17948 Y-17.43753 G01 X-9.77806 Y-18.20497 G01 X-10.07735 Y-18.46522 G01 X-10.49889 Y-18.84256 G01 X-11.06658 Y-19.37984 G01 X-11.05446 Y-20.32803 G01 X-11.13589 Y-21.16498 G01 X-11.22543 Y-21.89843 G01 X-11.24869 Y-22.05525 G01 X-11.37044 Y-22.75771 G01 X-12.26081 Y-23.27971 G01 X-13.04978 Y-23.75065 G01 X-13.51704 Y-24.02228 G01 X-14.03010 Y-24.21506 G01 X-14.79062 Y-24.49048 G01 X-15.36601 Y-24.70554 G01 X-15.85864 Y-25.24732 G01 X-16.24640 Y-25.68374 G01 X-16.65813 Y-26.13467 G01 X-17.11063 Y-26.63914 G01 X-18.24700 Y-27.88384 G01 X-19.01269 Y-28.71300 G01 X-19.33418 Y-30.57997 G01 X-19.27901 Y-31.09775 G01 X-19.14078 Y-32.73776 G01 X-18.98985 Y-33.26000 G01 X-18.91347 Y-33.53996 G01 X-18.70159 Y-34.21918 G01 X-18.64197 Y-34.38581 G01 X-18.47700 Y-34.81288 G01 X-18.16875 Y-35.49998 G01 X-18.47700 Y-34.81288 G01 X-18.64197 Y-34.38581 G01 X-18.70159 Y-34.21918 G01 X-18.91347 Y-33.53996 G01 X-18.98985 Y-33.26000 G01 X-19.14078 Y-32.73776 G01 X-20.46757 Y-32.75198 G01 X-20.99292 Y-32.76671 G01 X-21.76683 Y-32.80341 G01 X-22.07400 Y-32.82815 G01 X-22.36264 Y-32.86211 G01 X-22.58027 Y-32.89912 G01 X-22.73049 Y-32.93346 G01 X-23.00882 Y-33.01749 G01 X-23.17547 Y-33.05924 G01 X-23.26790 Y-33.07768 G01 X-23.43452 Y-33.10240 G01 X-23.51946 Y-33.11078 G01 X-23.68611 Y-33.11896 G01 X-23.76863 Y-33.11896 G01 X-23.93528 Y-33.11078 G01 X-24.02022 Y-33.10240 G01 X-24.18685 Y-33.07768 G01 X-24.27928 Y-33.05924 G01 X-24.44593 Y-33.01749 G01 X-24.72426 Y-32.93346 G01 X-24.87447 Y-32.89912 G01 X-25.09210 Y-32.86211 G01 X-25.38075 Y-32.82815 G01 X-25.68791 Y-32.80341 G01 X-25.90876 Y-32.79295 G01 X-26.02812 Y-32.14436 G01 X-26.11910 Y-31.73176 G01 X-25.83162 Y-30.57997 G01 X-26.17500 Y-29.46100 G01 X-25.63437 Y-27.21884 G01 X-24.50567 Y-27.03119 G01 X-23.56996 Y-26.86159 G01 X-22.96604 Y-26.74562 G01 X-23.56996 Y-26.86159 G01 X-24.50567 Y-27.03119 G01 X-25.63437 Y-27.21884 G01 X-25.95946 Y-26.87317 G01 X-26.66538 Y-26.10571 G01 X-27.33429 Y-25.36317 G01 X-28.01323 Y-24.59672 G01 X-28.53545 Y-23.99121 G01 X-29.97898 Y-22.23089 G01 X-30.31086 Y-22.07372 G01 X-30.80885 Y-21.83061 G01 X-31.29514 Y-22.20808 G01 X-33.35172 Y-23.82667 G01 X-35.29381 Y-25.36998 G01 X-47.99998 Y-25.36998 G04 P0 ( dwell for no time -- G64 should not smooth over this point ) G00 Z5.00000 ( retract ) G00 X-41.14739 Y-35.49998 ( rapid move to begin. ) G01 F50.00000 ( Mill infeed pass 1/1 ) G01 Z-0.04000 G04 P0 ( dwell for no time -- G64 should not smooth over this point ) G01 F100.00000 G01 X-41.14739 Y-35.49998 G01 X-41.14736 Y-19.05599 G01 X-41.61427 Y-18.50238 G01 X-41.81030 Y-18.28609 G01 X-42.07807 Y-17.99999 G01 X-42.50548 Y-17.49996 G01 X-42.66042 Y-17.29753 G01 X-42.79420 Y-17.11371 G01 X-43.02155 Y-16.78445 G01 X-43.13286 Y-16.61338 G01 X-43.30962 Y-16.32425 G01 X-43.40700 Y-16.15399 G01 X-43.56412 Y-15.85968 G01 X-43.65374 Y-15.67965 G01 X-43.90636 Y-15.13870 G01 X-44.12564 Y-14.72976 G01 X-44.24314 Y-14.53373 G01 X-44.56793 Y-14.04930 G01 X-44.85787 Y-13.66500 G01 X-45.19905 Y-13.23525 G01 X-45.37372 Y-13.00853 G01 X-46.16516 Y-11.95050 G01 X-46.39274 Y-11.63945 G01 X-47.01868 Y-10.76551 G01 X-47.99998 Y-10.70404 G01 X-47.01868 Y-10.76551 G01 X-45.14873 Y-10.04578 G01 X-44.54873 Y-9.83872 G01 X-43.94873 Y-9.67415 G01 X-43.02806 Y-9.45703 G01 X-42.46626 Y-9.43966 G01 X-41.92735 Y-9.43193 G01 X-41.63294 Y-9.42259 G01 X-41.26771 Y-9.40232 G01 X-40.67823 Y-8.58172 G01 X-40.23490 Y-7.92053 G01 X-40.13502 Y-7.75388 G01 X-39.83025 Y-7.18548 G01 X-39.47315 Y-6.46156 G01 X-39.19944 Y-5.93580 G01 X-36.81969 Y-6.03372 G01 X-35.62739 Y-6.03580 G01 X-34.77181 Y-6.07004 G01 X-34.67872 Y-6.01066 G01 X-34.44418 Y-6.01398 G01 X-32.47738 Y-6.06941 G01 X-32.38500 Y-6.00217 G01 X-29.97738 Y-6.06941 G01 X-29.88500 Y-6.00220 G01 X-29.88500 Y0.00000 G01 X-25.85905 Y0.00000 G01 X-25.84178 Y-0.80165 G01 X-25.80175 Y-1.85608 G01 X-25.75669 Y-2.62964 G01 X-25.72024 Y-3.10218 G01 X-25.68435 Y-3.47195 G01 X-25.66731 Y-3.69763 G01 X-25.65400 Y-4.07365 G01 X-25.65400 Y-4.32361 G01 X-25.66731 Y-4.69963 G01 X-25.68402 Y-4.92196 G01 X-25.72001 Y-5.29516 G01 X-25.75613 Y-5.76791 G01 X-25.77678 Y-6.11739 G01 X-25.40048 Y-6.82584 G01 X-25.13079 Y-7.31002 G01 X-24.94684 Y-7.62907 G01 X-25.03642 Y-7.99795 G01 X-25.24742 Y-8.96201 G01 X-24.69693 Y-9.72861 G01 X-24.03749 Y-10.66074 G01 X-23.09990 Y-12.01499 G01 X-21.12607 Y-12.01499 G01 X-20.62958 Y-11.25118 G01 X-20.00164 Y-10.26998 G01 X-12.44206 Y-10.26996 G01 X-12.37546 Y-10.19909 G01 X-12.19738 Y-10.02528 G01 X-11.92436 Y-10.08344 G01 X-11.64585 Y-10.16752 G01 X-11.47923 Y-10.20925 G01 X-11.38690 Y-10.22767 G01 X-11.22030 Y-10.25238 G01 X-11.13528 Y-10.26079 G01 X-10.96863 Y-10.26897 G01 X-10.88611 Y-10.26897 G01 X-10.71946 Y-10.26079 G01 X-10.63445 Y-10.25238 G01 X-10.46785 Y-10.22767 G01 X-10.37552 Y-10.20925 G01 X-10.20889 Y-10.16752 G01 X-9.93038 Y-10.08344 G01 X-9.78035 Y-10.04913 G01 X-9.56277 Y-10.01212 G01 X-9.27400 Y-9.97816 G01 X-8.96683 Y-9.95342 G01 X-8.19292 Y-9.91672 G01 X-7.66757 Y-9.90199 G01 X-6.76643 Y-9.89233 G01 X-7.24083 Y-9.27933 G01 X-7.47588 Y-8.96663 G01 X-7.75871 Y-8.60417 G01 X-7.92483 Y-8.38228 G01 X-8.16491 Y-8.07474 G01 X-8.29711 Y-7.89762 G01 X-9.18510 Y-6.74581 G01 X-9.31763 Y-6.56821 G01 X-9.55782 Y-6.26054 G01 X-9.81606 Y-5.91901 G01 X-9.46483 Y-4.29463 G01 X-9.58276 Y-3.68389 G01 X-10.25832 Y0.00000 G04 P0 ( dwell for no time -- G64 should not smooth over this point ) G00 Z5.00000 ( retract ) G00 X-9.77806 Y-18.20497 ( rapid move to begin. ) G01 F50.00000 ( Mill infeed pass 1/1 ) G01 Z-0.04000 G04 P0 ( dwell for no time -- G64 should not smooth over this point ) G01 F100.00000 G01 X-9.77806 Y-18.20497 G01 X-0.00000 Y-18.20497 G01 X-0.00000 Y-20.37791 G01 X-0.49192 Y-20.39170 G01 X-1.26695 Y-20.42843 G01 X-1.57414 Y-20.45317 G01 X-1.86266 Y-20.48711 G01 X-2.08023 Y-20.52411 G01 X-2.23037 Y-20.55843 G01 X-2.50888 Y-20.64253 G01 X-2.67551 Y-20.68426 G01 X-2.76791 Y-20.70268 G01 X-2.93456 Y-20.72739 G01 X-3.01948 Y-20.73577 G01 X-3.18610 Y-20.74395 G01 X-3.26862 Y-20.74395 G01 X-3.43527 Y-20.73577 G01 X-3.52019 Y-20.72739 G01 X-3.68684 Y-20.70268 G01 X-3.77927 Y-20.68424 G01 X-3.94586 Y-20.64250 G01 X-4.22435 Y-20.55843 G01 X-4.37439 Y-20.52414 G01 X-4.59196 Y-20.48713 G01 X-4.88061 Y-20.45317 G01 X-5.18780 Y-20.42843 G01 X-5.96283 Y-20.39170 G01 X-6.48838 Y-20.37695 G01 X-11.05446 Y-20.32803 G01 X-11.06658 Y-19.37984 G01 X-11.61077 Y-18.87629 G01 X-12.59967 Y-18.00116 G01 X-13.84973 Y-17.16789 G01 X-20.25124 Y-17.16789 G01 X-20.42447 Y-17.08249 G01 X-21.91052 Y-17.17497 G01 X-22.96604 Y-17.25115 G01 X-23.85289 Y-16.77121 G01 X-28.36735 Y-17.89369 G01 X-30.66418 Y-20.71873 G01 X-30.70690 Y-21.02709 G01 X-30.80885 Y-21.83061 G01 X-30.31086 Y-22.07372 G01 X-29.97898 Y-22.23089 G01 X-20.20659 Y-22.23089 G01 X-19.23026 Y-22.72055 G01 X-17.78284 Y-23.45779 G01 X-15.36601 Y-24.70554 G01 X-14.79062 Y-24.49048 G01 X-14.03010 Y-24.21506 G01 X-13.51704 Y-24.02228 G01 X-13.51704 Y-35.49998 G01 X-11.01705 Y-35.49998 G01 X-11.01702 Y-23.15355 G01 X-11.37044 Y-22.75771 G01 X-11.01702 Y-23.15355 G01 X-10.39086 Y-23.66447 G01 X-9.23420 Y-24.58712 G01 X-8.51705 Y-25.14318 G01 X-7.70791 Y-25.52101 G01 X-6.86328 Y-25.89873 G01 X-6.01706 Y-26.25860 G01 X-6.01703 Y-32.75233 G04 P0 ( dwell for no time -- G64 should not smooth over this point ) G00 Z5.00000 ( retract ) G00 X-20.20659 Y-22.23089 ( rapid move to begin. ) G01 F50.00000 ( Mill infeed pass 1/1 ) G01 Z-0.04000 G04 P0 ( dwell for no time -- G64 should not smooth over this point ) G01 F100.00000 G01 X-20.20659 Y-22.23089 G01 X-20.20034 Y-21.77268 G01 X-20.18795 Y-21.42122 G01 X-20.17570 Y-20.77705 G01 X-20.16928 Y-20.13318 G01 X-20.16963 Y-19.74230 G01 X-20.17626 Y-19.25071 G01 X-20.18652 Y-18.86496 G01 X-20.22208 Y-17.87296 G01 X-20.24578 Y-17.40311 G01 X-20.25124 Y-17.16789 G01 X-20.42447 Y-17.08249 G01 X-20.39823 Y-16.67744 G01 X-20.38027 Y-16.28008 G01 X-20.22566 Y-13.38402 G01 X-20.20120 Y-12.99380 G01 X-21.12607 Y-12.01499 G01 X-20.20120 Y-12.99380 G01 X-19.45315 Y-13.05799 G01 X-18.77698 Y-13.12123 G01 X-17.97764 Y-13.20096 G01 X-17.27736 Y-13.27645 G01 X-16.34594 Y-14.12751 G01 X-15.98579 Y-14.46456 G01 X-15.78536 Y-14.64434 G01 X-15.30459 Y-15.09583 G01 X-14.73738 Y-15.61346 G01 X-14.47721 Y-16.07632 G01 X-14.06738 Y-16.78214 G01 X-13.84973 Y-17.16789 G01 X-12.59967 Y-18.00116 G01 X-12.56535 Y-14.79934 G01 X-12.55062 Y-14.27416 G01 X-12.51394 Y-13.50071 G01 X-12.48921 Y-13.19347 G01 X-12.45522 Y-12.90457 G01 X-12.41821 Y-12.68700 G01 X-12.38392 Y-12.53696 G01 X-12.29985 Y-12.25847 G01 X-12.25812 Y-12.09187 G01 X-12.23970 Y-11.99949 G01 X-12.21496 Y-11.83287 G01 X-12.20658 Y-11.74788 G01 X-12.19838 Y-11.58123 G01 X-12.19838 Y-11.49871 G01 X-12.20658 Y-11.33208 G01 X-12.21496 Y-11.24709 G01 X-12.23970 Y-11.08047 G01 X-12.25809 Y-10.98812 G01 X-12.29982 Y-10.82149 G01 X-12.38392 Y-10.54298 G01 X-12.44206 Y-10.26996 G01 X-12.37546 Y-10.19909 G01 X-12.19738 Y-10.02528 G01 X-12.19738 Y-6.81055 G01 X-10.91722 Y-6.32991 G01 X-10.74202 Y-6.26775 G01 X-10.35228 Y-6.11886 G01 X-10.11474 Y-6.03400 G01 X-9.81606 Y-5.91901 G01 X-10.11474 Y-6.03400 G01 X-10.35228 Y-6.11886 G01 X-10.74202 Y-6.26775 G01 X-10.91722 Y-6.32991 G01 X-12.19738 Y-6.81055 G01 X-13.92298 Y-6.51452 G01 X-14.73738 Y-6.81424 G01 X-16.42298 Y-6.51109 G01 X-17.27736 Y-6.81744 G01 X-18.92297 Y-6.50814 G01 X-20.13661 Y-6.93227 G01 X-20.53674 Y-7.06839 G01 X-21.18393 Y-6.87464 G01 X-21.49584 Y-6.90888 G01 X-22.07298 Y-6.95622 G01 X-22.41113 Y-6.99028 G01 X-22.56798 Y-7.01355 G01 X-22.93640 Y-7.08703 G01 X-23.09322 Y-7.12633 G01 X-23.65565 Y-7.28894 G01 X-24.15047 Y-7.42500 G01 X-24.94684 Y-7.62907 G01 X-25.03642 Y-7.99795 G01 X-25.24742 Y-8.96201 G01 X-25.93101 Y-9.39828 G01 X-26.93579 Y-10.05020 G01 X-27.51346 Y-10.43295 G01 X-28.36977 Y-11.01060 G01 X-28.36735 Y-17.89369 G01 X-30.66418 Y-20.71873 G01 X-31.52379 Y-19.43042 G01 X-32.24985 Y-18.32793 G01 X-32.46130 Y-17.99999 G01 X-32.58546 Y-17.80040 G01 X-32.76242 Y-17.49996 G01 X-32.96724 Y-17.13258 G01 X-33.35785 Y-16.41241 G01 X-33.36656 Y-16.01559 G01 X-33.37725 Y-14.85674 G01 X-33.37725 Y-14.17320 G01 X-33.37100 Y-13.44844 G01 X-33.74217 Y-12.55629 G01 X-34.17049 Y-11.49657 G01 X-34.43150 Y-11.40818 G01 X-34.71807 Y-11.30463 G01 X-35.10724 Y-11.29347 G01 X-35.76074 Y-11.26228 G01 X-36.23401 Y-11.26228 G01 X-36.40064 Y-11.27046 G01 X-36.82738 Y-11.31026 G01 X-37.26739 Y-11.36208 G01 X-37.26739 Y-15.72514 G01 X-37.26739 Y-11.36208 G01 X-37.61080 Y-11.26620 G01 X-38.28125 Y-11.06421 G01 X-38.98334 Y-10.83683 G01 X-39.43322 Y-10.68149 G01 X-40.22738 Y-10.16925 G01 X-40.74531 Y-9.81210 G01 X-41.26771 Y-9.40232 G01 X-41.63294 Y-9.42259 G01 X-41.92735 Y-9.43193 G01 X-42.46626 Y-9.43966 G01 X-43.02806 Y-9.45703 G01 X-43.03822 Y-7.86902 G01 X-43.04581 Y-7.35112 G01 X-43.07159 Y-6.44088 G01 X-43.08638 Y-6.11508 G01 X-43.10835 Y-5.77319 G01 X-43.13006 Y-5.53700 G01 X-43.17296 Y-5.21155 G01 X-43.21391 Y-4.99859 G01 X-43.25686 Y-4.80413 G01 X-43.28157 Y-4.63751 G01 X-43.28955 Y-4.55656 G01 X-43.29872 Y-4.35064 G01 X-43.29773 Y-4.01132 G01 X-43.28955 Y-3.84470 G01 X-43.28157 Y-3.76372 G01 X-43.25686 Y-3.59710 G01 X-43.20593 Y-3.36365 G01 X-43.15953 Y-3.10685 G01 X-43.12849 Y-2.84930 G01 X-43.10969 Y-2.64241 G01 X-43.08452 Y-2.25392 G01 X-43.07114 Y-1.96118 G01 X-43.04566 Y-1.05065 G01 X-43.03682 Y-0.50561 G01 X-43.03601 Y0.00000 G01 X-39.28008 Y0.00000 G01 X-39.26665 Y-0.79220 G01 X-39.23160 Y-1.84633 G01 X-39.19024 Y-2.61724 G01 X-39.15613 Y-3.08590 G01 X-39.12001 Y-3.47365 G01 X-39.10513 Y-3.67701 G01 X-39.09187 Y-4.05064 G01 X-39.09187 Y-4.35064 G01 X-39.10513 Y-4.72427 G01 X-39.11963 Y-4.92364 G01 X-39.15583 Y-5.31543 G01 X-39.19944 Y-5.93580 G04 P0 ( dwell for no time -- G64 should not smooth over this point ) G00 Z5.00000 ( retract ) G00 X-25.77678 Y-6.11739 ( rapid move to begin. ) G01 F50.00000 ( Mill infeed pass 1/1 ) G01 Z-0.04000 G04 P0 ( dwell for no time -- G64 should not smooth over this point ) G01 F100.00000 G01 X-25.77678 Y-6.11739 G01 X-26.34348 Y-6.09653 G01 X-26.83525 Y-6.08752 G01 X-27.08819 Y-6.07703 G01 X-27.45842 Y-6.07027 G01 X-27.61061 Y-6.06328 G01 X-27.91836 Y-6.05760 G01 X-29.88500 Y-6.00220 G01 X-29.97738 Y-6.06941 G01 X-29.97738 Y-10.19023 G01 X-29.07198 Y-10.64692 G01 X-28.36977 Y-11.01060 G01 X-29.07198 Y-10.64692 G01 X-29.97738 Y-10.19023 G01 X-30.92181 Y-10.25060 G01 X-31.36880 Y-10.28370 G01 X-32.47738 Y-10.37819 G01 X-33.35279 Y-10.95136 G01 X-34.17049 Y-11.49657 G01 X-34.43150 Y-11.40818 G01 X-34.71807 Y-11.30463 G01 X-35.10724 Y-11.29347 G01 X-35.76074 Y-11.26228 G01 X-36.23401 Y-11.26228 G01 X-36.40064 Y-11.27046 G01 X-36.82738 Y-11.31026 G01 X-37.26739 Y-11.36208 G01 X-37.61080 Y-11.26620 G01 X-38.28125 Y-11.06421 G01 X-38.98334 Y-10.83683 G01 X-39.43322 Y-10.68149 G01 X-39.43937 Y-11.25438 G01 X-39.45410 Y-11.77978 G01 X-39.49083 Y-12.55420 G01 X-39.51554 Y-12.86144 G01 X-39.54953 Y-13.15037 G01 X-39.58653 Y-13.36794 G01 X-39.62082 Y-13.51798 G01 X-39.70492 Y-13.79649 G01 X-39.74666 Y-13.96312 G01 X-39.76507 Y-14.05552 G01 X-39.78979 Y-14.22217 G01 X-39.79817 Y-14.30708 G01 X-39.80635 Y-14.47371 G01 X-39.80635 Y-14.55623 G01 X-39.79817 Y-14.72288 G01 X-39.78979 Y-14.80779 G01 X-39.76507 Y-14.97444 G01 X-39.74663 Y-15.06687 G01 X-39.70490 Y-15.23347 G01 X-39.62082 Y-15.51196 G01 X-39.58653 Y-15.66200 G01 X-39.54953 Y-15.87957 G01 X-39.51554 Y-16.16847 G01 X-39.49080 Y-16.47571 G01 X-39.46042 Y-17.11602 G01 X-39.60167 Y-17.30047 G01 X-39.76243 Y-17.49996 G01 X-40.21242 Y-17.99999 G01 X-40.48483 Y-18.28653 G01 X-40.68087 Y-18.50283 G01 X-41.14736 Y-19.05599 G01 X-40.68087 Y-18.50283 G01 X-40.48483 Y-18.28653 G01 X-40.21242 Y-17.99999 G01 X-39.76243 Y-17.49996 G01 X-39.60167 Y-17.30047 G01 X-39.46042 Y-17.11602 G01 X-39.18786 Y-16.94556 G01 X-39.03594 Y-16.85663 G01 X-38.17302 Y-16.31716 G01 X-37.79754 Y-16.07604 G01 X-37.26739 Y-15.72514 G01 X-36.79424 Y-15.82920 G01 X-36.50135 Y-15.88912 G01 X-35.76444 Y-16.02989 G01 X-34.82320 Y-16.18717 G01 X-34.72213 Y-16.20012 G01 X-34.11949 Y-16.29725 G01 X-33.92698 Y-16.32199 G01 X-33.60555 Y-16.37022 G01 X-33.35785 Y-16.41241 G01 X-33.36656 Y-16.01559 G01 X-33.37725 Y-14.85674 G01 X-33.37725 Y-14.17320 G01 X-33.37100 Y-13.44844 G01 X-28.36977 Y-13.44290 G01 X-28.36735 Y-13.44856 G01 X-23.83379 Y-13.44346 G01 X-23.55723 Y-12.91184 G01 X-23.09990 Y-12.01499 G01 X-23.55723 Y-12.91184 G01 X-23.83379 Y-13.44346 G01 X-23.82738 Y-14.24894 G01 X-23.82937 Y-15.19271 G01 X-23.84316 Y-16.35275 G01 X-23.85289 Y-16.77121 G01 X-22.96604 Y-17.25115 G01 X-22.96604 Y-26.74562 G01 X-22.41494 Y-27.03152 G01 X-21.42795 Y-27.53083 G01 X-19.96021 Y-28.25402 G01 X-19.48635 Y-28.47917 G01 X-19.01269 Y-28.71300 G01 X-19.33418 Y-30.57997 G01 X-25.83162 Y-30.57997 G01 X-26.17500 Y-29.46100 G01 X-33.03801 Y-29.46103 G01 X-33.33145 Y-28.93921 G01 X-33.89277 Y-27.92547 G01 X-35.29381 Y-25.36998 G04 P0 ( dwell for no time -- G64 should not smooth over this point ) G00 Z5.000000 ( retract ) G04 P1.000000 M9 ( Coolant off. )