Kaorin/gerber/pcb_back.ngc.tap

( pcb2gcode 2.5.0 )
( Software-independent Gcode )

G94 ( Millimeters per minute feed rate. )
G21 ( Units == Millimeters. )

G90 ( Absolute coordinates. )
G00 S24000 ( RPM spindle speed. )
G64 P0.01016 ( set maximum deviation from commanded toolpath )
G01 F100.00000 ( Feedrate. )


G00 Z5.00000 (Retract to tool change height)
T1
G04 P1.00000 (Wait for spindle to stop)
(MSG, Change tool bit to mill diameter 0.00000mm)
M3 ( Spindle on clockwise. )
G04 P1.00000 (Wait for spindle to get up to speed)
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z5.00000 ( retract )

G00 X-11.04948 Y-7.43715 ( rapid move to begin. )
G01 F50.00000
( Mill infeed pass 1/1 )
G01 Z-0.04000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F100.00000
G01 X-11.04948 Y-7.43715
G01 X-10.63904 Y-7.00877
G01 X-9.99526 Y-6.31652
G01 X-9.38916 Y-5.64789
G01 X-8.57227 Y-4.72498
G01 X-8.32216 Y-4.44782
G01 X-7.77156 Y-3.87162
G01 X-7.16420 Y-3.29545
G01 X-6.94350 Y-3.09301
G01 X-6.11000 Y-2.12529
G01 X-5.48345 Y-1.37063
G01 X-4.85694 Y-0.55583
G01 X-4.45470 Y-0.00269
G01 X-4.85694 Y-0.55583
G01 X-5.48345 Y-1.37063
G01 X-6.11000 Y-2.12529
G01 X-6.94350 Y-3.09301
G01 X-6.89800 Y-7.33897
G01 X-6.88325 Y-7.86453
G01 X-6.84652 Y-8.63956
G01 X-6.82178 Y-8.94674
G01 X-6.78785 Y-9.23526
G01 X-6.75084 Y-9.45284
G01 X-6.71652 Y-9.60298
G01 X-6.63242 Y-9.88149
G01 X-6.59066 Y-10.04811
G01 X-6.57228 Y-10.14052
G01 X-6.54756 Y-10.30717
G01 X-6.53918 Y-10.39208
G01 X-6.53100 Y-10.55870
G01 X-6.53100 Y-10.64123
G01 X-6.53918 Y-10.80788
G01 X-6.54756 Y-10.89279
G01 X-6.57228 Y-11.05944
G01 X-6.59072 Y-11.15187
G01 X-6.63245 Y-11.31847
G01 X-6.71652 Y-11.59695
G01 X-6.77466 Y-11.86998
G01 X-6.60085 Y-12.04806
G01 X-6.52996 Y-12.11466
G01 X-6.52996 Y-21.09866
G01 X-7.79996 Y-21.48088
G01 X-11.39998 Y-20.39742
G01 X-12.43106 Y-19.46488
G01 X-11.39998 Y-20.39742
G01 X-11.39998 Y-48.00430
G01 X-14.99997 Y-48.00567
G01 X-14.99997 Y-19.82513
G01 X-15.35847 Y-19.73425
G01 X-15.83372 Y-19.60588
G01 X-16.25316 Y-19.49785
G01 X-16.70012 Y-19.37535
G01 X-16.69595 Y-18.99072
G01 X-16.67599 Y-18.09999
G01 X-16.67142 Y-17.68559
G01 X-16.57744 Y-12.73995
G01 X-16.67251 Y-12.65997
G01 X-24.10369 Y-12.65997
G01 X-24.80137 Y-13.45146
G01 X-25.70282 Y-14.45067
G01 X-26.99210 Y-15.85026
G01 X-25.71016 Y-17.11300
G01 X-25.71824 Y-17.89341
G01 X-25.72255 Y-18.86361
G01 X-25.74313 Y-20.65513
G01 X-25.74496 Y-21.15693
G01 X-25.78727 Y-25.47028
G01 X-25.76286 Y-25.50345
G01 X-25.78727 Y-28.01028
G01 X-25.76286 Y-28.04348
G01 X-25.78727 Y-30.55028
G01 X-25.76286 Y-30.58345
G01 X-25.78727 Y-33.09028
G01 X-25.76286 Y-33.12348
G01 X-25.78727 Y-35.63028
G01 X-25.76286 Y-35.66348
G01 X-25.79337 Y-38.80531
G01 X-25.33114 Y-39.23576
G01 X-25.07155 Y-39.48295
G01 X-24.91082 Y-39.62926
G01 X-24.61654 Y-39.90945
G01 X-24.40226 Y-40.10530
G01 X-23.97201 Y-40.51242
G01 X-23.97191 Y-48.00907
G01 X-18.59999 Y-48.00704
G01 X-18.59999 Y-19.79938
G01 X-19.86110 Y-19.57857
G01 X-20.78787 Y-19.41121
G01 X-22.25170 Y-19.13948
G01 X-22.23526 Y-20.58995
G01 X-22.23346 Y-21.09361
G01 X-22.19112 Y-25.46998
G01 X-22.21499 Y-25.50345
G01 X-22.19112 Y-28.00998
G01 X-22.21499 Y-28.04348
G01 X-22.19112 Y-30.54998
G01 X-22.21499 Y-30.58345
G01 X-22.19112 Y-33.08998
G01 X-22.21499 Y-33.12348
G01 X-22.19112 Y-35.62998
G01 X-22.21499 Y-35.66348
G01 X-22.18512 Y-38.80498
G01 X-23.09005 Y-39.66675
G01 X-23.33645 Y-39.90607
G01 X-23.60483 Y-40.15798
G01 X-23.97201 Y-40.51242
G01 X-23.60483 Y-40.15798
G01 X-23.33645 Y-39.90607
G01 X-23.09005 Y-39.66675
G01 X-22.18512 Y-38.80498
G01 X-7.79996 Y-38.80498
G01 X-7.10001 Y-39.46837
G01 X-6.91723 Y-39.63693
G01 X-6.64322 Y-39.90025
G01 X-6.40123 Y-40.12415
G01 X-5.99996 Y-40.50744
G01 X-5.99999 Y-48.00224
G01 X-5.99996 Y-40.50744
G01 X-5.59872 Y-40.12415
G01 X-5.35673 Y-39.90025
G01 X-5.08272 Y-39.63693
G01 X-4.89974 Y-39.46820
G01 X-4.19999 Y-38.80498
G01 X-0.00000 Y-38.80498
G01 X-0.00000 Y-30.54998
G01 X-22.19112 Y-30.54998
G01 X-22.21499 Y-30.58345
G01 X-22.32739 Y-30.58348
G01 X-25.76286 Y-30.58345
G01 X-25.78727 Y-30.55028
G01 X-29.32862 Y-30.55028
G01 X-29.32803 Y-15.92008
G01 X-29.99748 Y-15.81777
G01 X-30.40316 Y-16.13883
G01 X-31.40232 Y-16.91523
G01 X-31.87761 Y-17.29120
G01 X-32.62625 Y-17.87235
G01 X-32.89127 Y-18.08272
G01 X-36.37745 Y-19.47756
G01 X-40.10546 Y-19.54665
G01 X-43.19999 Y-18.42465
G01 X-40.10546 Y-19.54665
G01 X-40.08095 Y-20.50283
G01 X-40.07190 Y-21.19069
G01 X-40.05489 Y-21.78883
G01 X-40.04932 Y-22.23684
G01 X-40.03934 Y-22.55261
G01 X-40.03523 Y-22.89254
G01 X-40.02837 Y-23.09015
G01 X-39.98034 Y-25.41745
G01 X-40.03317 Y-25.49195
G01 X-39.98034 Y-27.95745
G01 X-40.03317 Y-28.03195
G01 X-39.98034 Y-30.49742
G01 X-40.03317 Y-30.57195
G01 X-39.98034 Y-33.03745
G01 X-40.03317 Y-33.11195
G01 X-39.98034 Y-35.57745
G01 X-40.03317 Y-35.65195
G01 X-39.96672 Y-38.75245
G01 X-40.88051 Y-39.62019
G01 X-41.13164 Y-39.86360
G01 X-41.38917 Y-40.10454
G01 X-41.69390 Y-40.39969
G01 X-42.08097 Y-40.76311
G01 X-42.49245 Y-41.16123
G01 X-43.30423 Y-41.92745
G01 X-44.32717 Y-42.51289
G01 X-45.09948 Y-42.94482
G01 X-47.02348 Y-44.04363
G01 X-47.80460 Y-44.38599
G01 X-48.50125 Y-44.69722
G01 X-47.80460 Y-44.38599
G01 X-47.02348 Y-44.04363
G01 X-46.04055 Y-44.05066
G01 X-41.48818 Y-44.09943
G01 X-40.96263 Y-44.11419
G01 X-40.18742 Y-44.15094
G01 X-39.88029 Y-44.17565
G01 X-39.59192 Y-44.20959
G01 X-39.37432 Y-44.24657
G01 X-39.22418 Y-44.28091
G01 X-38.94574 Y-44.36496
G01 X-38.77909 Y-44.40672
G01 X-38.68664 Y-44.42516
G01 X-38.51999 Y-44.44987
G01 X-38.43508 Y-44.45825
G01 X-38.26845 Y-44.46643
G01 X-38.18593 Y-44.46643
G01 X-38.01928 Y-44.45825
G01 X-37.93437 Y-44.44987
G01 X-37.76772 Y-44.42516
G01 X-37.67521 Y-44.40672
G01 X-37.50861 Y-44.36496
G01 X-37.23020 Y-44.28091
G01 X-37.08016 Y-44.24660
G01 X-36.86259 Y-44.20959
G01 X-36.46216 Y-44.16412
G01 X-36.42843 Y-44.21716
G01 X-36.44811 Y-44.93999
G01 X-36.44885 Y-46.63999
G01 X-36.48768 Y-48.01385
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z5.00000 ( retract )

G00 X-25.79337 Y-38.80531 ( rapid move to begin. )
G01 F50.00000
( Mill infeed pass 1/1 )
G01 Z-0.04000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F100.00000
G01 X-25.79337 Y-38.80531
G01 X-29.32892 Y-38.80495
G01 X-29.32885 Y-30.54998
G01 X-36.42921 Y-30.54998
G01 X-36.46701 Y-30.49742
G01 X-36.42921 Y-28.00998
G01 X-36.46701 Y-27.95745
G01 X-36.42921 Y-25.46998
G01 X-36.46701 Y-25.41742
G01 X-36.41753 Y-22.20054
G01 X-36.41476 Y-21.80742
G01 X-36.40127 Y-21.13620
G01 X-36.39678 Y-20.54705
G01 X-36.37745 Y-19.47756
G01 X-32.89127 Y-18.08272
G01 X-32.89127 Y-48.01248
G01 X-29.32897 Y-48.01113
G01 X-29.32892 Y-38.80495
G01 X-36.41964 Y-38.80498
G01 X-36.47661 Y-38.75245
G01 X-39.96672 Y-38.75245
G01 X-40.88051 Y-39.62019
G01 X-41.13164 Y-39.86360
G01 X-41.38917 Y-40.10454
G01 X-41.69390 Y-40.39969
G01 X-42.08097 Y-40.76311
G01 X-42.49245 Y-41.16123
G01 X-43.30423 Y-41.92745
G01 X-36.46701 Y-41.92742
G01 X-36.42921 Y-41.97998
G01 X-36.46216 Y-44.16412
G01 X-36.42843 Y-44.21716
G01 X-36.03379 Y-44.26212
G01 X-35.81618 Y-44.29910
G01 X-35.66604 Y-44.33344
G01 X-35.38761 Y-44.41749
G01 X-35.22096 Y-44.45925
G01 X-35.12850 Y-44.47769
G01 X-34.96186 Y-44.50240
G01 X-34.87694 Y-44.51078
G01 X-34.71032 Y-44.51896
G01 X-34.62779 Y-44.51896
G01 X-34.46115 Y-44.51078
G01 X-34.37623 Y-44.50240
G01 X-34.20958 Y-44.47769
G01 X-34.11708 Y-44.45925
G01 X-33.95048 Y-44.41749
G01 X-33.67207 Y-44.33344
G01 X-33.52203 Y-44.29912
G01 X-33.30445 Y-44.26212
G01 X-32.89127 Y-44.21553
G01 X-32.47807 Y-44.26212
G01 X-32.26049 Y-44.29912
G01 X-32.11045 Y-44.33344
G01 X-31.83204 Y-44.41749
G01 X-31.66544 Y-44.45925
G01 X-31.57294 Y-44.47769
G01 X-31.40629 Y-44.50240
G01 X-31.32137 Y-44.51078
G01 X-31.15473 Y-44.51896
G01 X-31.07220 Y-44.51896
G01 X-30.90558 Y-44.51078
G01 X-30.82066 Y-44.50240
G01 X-30.65402 Y-44.47769
G01 X-30.56156 Y-44.45925
G01 X-30.39491 Y-44.41749
G01 X-30.11648 Y-44.33344
G01 X-29.96634 Y-44.29910
G01 X-29.74873 Y-44.26212
G01 X-29.32882 Y-44.21495
G01 X-28.90886 Y-44.26240
G01 X-28.69123 Y-44.29940
G01 X-28.54094 Y-44.33377
G01 X-28.26258 Y-44.41779
G01 X-28.09593 Y-44.45955
G01 X-28.00347 Y-44.47799
G01 X-27.83683 Y-44.50270
G01 X-27.75191 Y-44.51109
G01 X-27.58529 Y-44.51927
G01 X-27.50276 Y-44.51927
G01 X-27.33611 Y-44.51109
G01 X-27.25120 Y-44.50270
G01 X-27.08455 Y-44.47799
G01 X-26.99205 Y-44.45955
G01 X-26.82545 Y-44.41779
G01 X-26.54714 Y-44.33377
G01 X-26.39692 Y-44.29943
G01 X-26.17930 Y-44.26242
G01 X-25.89091 Y-44.22849
G01 X-25.58377 Y-44.20377
G01 X-24.80856 Y-44.16702
G01 X-24.28301 Y-44.15226
G01 X-23.97196 Y-44.14863
G01 X-23.65977 Y-44.15198
G01 X-23.13442 Y-44.16671
G01 X-22.36051 Y-44.20342
G01 X-22.05335 Y-44.22816
G01 X-21.76457 Y-44.26212
G01 X-21.54700 Y-44.29912
G01 X-21.39696 Y-44.33344
G01 X-21.11853 Y-44.41749
G01 X-20.95188 Y-44.45925
G01 X-20.85945 Y-44.47769
G01 X-20.69282 Y-44.50240
G01 X-20.60788 Y-44.51078
G01 X-20.44123 Y-44.51896
G01 X-20.35871 Y-44.51896
G01 X-20.19206 Y-44.51078
G01 X-20.10712 Y-44.50240
G01 X-19.94050 Y-44.47769
G01 X-19.84807 Y-44.45925
G01 X-19.68142 Y-44.41749
G01 X-19.40298 Y-44.33344
G01 X-19.25295 Y-44.29912
G01 X-19.03534 Y-44.26214
G01 X-18.59999 Y-44.21368
G01 X-18.16461 Y-44.26214
G01 X-17.94700 Y-44.29912
G01 X-17.79697 Y-44.33344
G01 X-17.51853 Y-44.41749
G01 X-17.35188 Y-44.45925
G01 X-17.25943 Y-44.47769
G01 X-17.09278 Y-44.50240
G01 X-17.00787 Y-44.51078
G01 X-16.84124 Y-44.51896
G01 X-16.75872 Y-44.51896
G01 X-16.59207 Y-44.51078
G01 X-16.50716 Y-44.50240
G01 X-16.34051 Y-44.47769
G01 X-16.24800 Y-44.45925
G01 X-16.08140 Y-44.41749
G01 X-15.80299 Y-44.33344
G01 X-15.65295 Y-44.29912
G01 X-15.43538 Y-44.26212
G01 X-14.99997 Y-44.21368
G01 X-14.56472 Y-44.26212
G01 X-14.34711 Y-44.29910
G01 X-14.19690 Y-44.33344
G01 X-13.91854 Y-44.41749
G01 X-13.75194 Y-44.45925
G01 X-13.65943 Y-44.47769
G01 X-13.49278 Y-44.50240
G01 X-13.40787 Y-44.51078
G01 X-13.24125 Y-44.51896
G01 X-13.15870 Y-44.51896
G01 X-12.99207 Y-44.51078
G01 X-12.90716 Y-44.50240
G01 X-12.74051 Y-44.47769
G01 X-12.64801 Y-44.45925
G01 X-12.48141 Y-44.41749
G01 X-12.20300 Y-44.33344
G01 X-12.05296 Y-44.29912
G01 X-11.83538 Y-44.26212
G01 X-11.39998 Y-44.21368
G01 X-10.96457 Y-44.26212
G01 X-10.74699 Y-44.29912
G01 X-10.59696 Y-44.33344
G01 X-10.31855 Y-44.41749
G01 X-10.15195 Y-44.45925
G01 X-10.05944 Y-44.47769
G01 X-9.89279 Y-44.50240
G01 X-9.80788 Y-44.51078
G01 X-9.64123 Y-44.51896
G01 X-9.55871 Y-44.51896
G01 X-9.39208 Y-44.51078
G01 X-9.30717 Y-44.50240
G01 X-9.14052 Y-44.47769
G01 X-9.04806 Y-44.45925
G01 X-8.88141 Y-44.41749
G01 X-8.60298 Y-44.33344
G01 X-8.45294 Y-44.29912
G01 X-8.23534 Y-44.26214
G01 X-7.94657 Y-44.22818
G01 X-7.63938 Y-44.20344
G01 X-6.86453 Y-44.16671
G01 X-6.33898 Y-44.15196
G01 X-5.99999 Y-44.14832
G01 X-5.66097 Y-44.15196
G01 X-5.13542 Y-44.16671
G01 X-4.36021 Y-44.20347
G01 X-4.05308 Y-44.22818
G01 X-3.76471 Y-44.26212
G01 X-3.54711 Y-44.29910
G01 X-3.39697 Y-44.33344
G01 X-3.11854 Y-44.41749
G01 X-2.95189 Y-44.45925
G01 X-2.85943 Y-44.47769
G01 X-2.69278 Y-44.50240
G01 X-2.60787 Y-44.51078
G01 X-2.44124 Y-44.51896
G01 X-2.35872 Y-44.51896
G01 X-2.19207 Y-44.51078
G01 X-2.10716 Y-44.50240
G01 X-1.94051 Y-44.47769
G01 X-1.84800 Y-44.45925
G01 X-1.68140 Y-44.41749
G01 X-1.40299 Y-44.33344
G01 X-1.25296 Y-44.29912
G01 X-1.03538 Y-44.26212
G01 X-0.74686 Y-44.22818
G01 X-0.43972 Y-44.20347
G01 X-0.00000 Y-44.18261
G01 X-0.00000 Y-41.97998
G01 X-36.42921 Y-41.97998
G01 X-36.46701 Y-41.92742
G01 X-36.41964 Y-38.80498
G01 X-36.47661 Y-38.75245
G01 X-36.42921 Y-35.62998
G01 X-36.46701 Y-35.57745
G01 X-36.42921 Y-33.08998
G01 X-36.46701 Y-33.03745
G01 X-36.42921 Y-30.54998
G01 X-36.46701 Y-30.49742
G01 X-39.98034 Y-30.49742
G01 X-40.03317 Y-30.57195
G01 X-43.19999 Y-30.57195
G01 X-43.19999 Y-28.03195
G01 X-40.03317 Y-28.03195
G01 X-39.98034 Y-27.95745
G01 X-36.46701 Y-27.95745
G01 X-36.42921 Y-28.00998
G01 X-25.78727 Y-28.01028
G01 X-25.76286 Y-28.04348
G01 X-22.21499 Y-28.04348
G01 X-22.19112 Y-28.00998
G01 X-0.00000 Y-28.00998
G01 X-0.00000 Y-25.46998
G01 X-22.19112 Y-25.46998
G01 X-22.21499 Y-25.50345
G01 X-25.76286 Y-25.50345
G01 X-25.78727 Y-25.47028
G01 X-36.42921 Y-25.46998
G01 X-36.46701 Y-25.41742
G01 X-39.98034 Y-25.41745
G01 X-40.03317 Y-25.49195
G01 X-43.19999 Y-25.49195
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z5.00000 ( retract )

G00 X-31.61317 Y-13.60998 ( rapid move to begin. )
G01 F50.00000
( Mill infeed pass 1/1 )
G01 Z-0.04000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F100.00000
G01 X-31.61317 Y-13.60998
G01 X-43.19999 Y-13.60998
G01 X-43.19999 Y-11.45449
G01 X-41.66098 Y-11.43800
G01 X-41.13543 Y-11.42324
G01 X-40.36040 Y-11.38652
G01 X-40.05321 Y-11.36178
G01 X-39.76469 Y-11.32784
G01 X-39.54711 Y-11.29083
G01 X-39.39682 Y-11.25649
G01 X-39.11854 Y-11.17247
G01 X-38.95194 Y-11.13071
G01 X-38.85943 Y-11.11227
G01 X-38.69279 Y-11.08756
G01 X-38.60787 Y-11.07918
G01 X-38.44125 Y-11.07100
G01 X-38.35872 Y-11.07100
G01 X-38.19207 Y-11.07918
G01 X-38.10716 Y-11.08756
G01 X-37.94051 Y-11.11227
G01 X-37.84801 Y-11.13071
G01 X-37.68141 Y-11.17247
G01 X-37.40310 Y-11.25649
G01 X-37.25296 Y-11.29081
G01 X-37.03538 Y-11.32782
G01 X-36.74674 Y-11.36178
G01 X-36.43955 Y-11.38652
G01 X-35.66452 Y-11.42324
G01 X-35.13897 Y-11.43800
G01 X-32.58505 Y-11.46536
G01 X-32.79760 Y-10.64997
G01 X-32.92907 Y-10.07410
G01 X-33.02330 Y-9.49820
G01 X-32.10090 Y-8.25774
G01 X-31.67786 Y-7.62678
G01 X-31.64848 Y-7.57779
G01 X-31.32595 Y-6.97062
G01 X-31.17807 Y-6.62998
G01 X-30.85978 Y-5.84535
G01 X-30.81381 Y-5.15313
G01 X-30.78660 Y-4.56212
G01 X-30.74434 Y-4.13400
G01 X-30.71962 Y-3.96738
G01 X-30.66539 Y-3.66997
G01 X-30.71962 Y-3.37256
G01 X-30.84025 Y-2.61572
G01 X-30.94586 Y-2.04323
G01 X-31.09801 Y-1.31262
G01 X-31.30004 Y-0.43426
G01 X-31.40392 Y-0.01902
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z5.00000 ( retract )

G00 X-48.50201 Y-7.37705 ( rapid move to begin. )
G01 F50.00000
( Mill infeed pass 1/1 )
G01 Z-0.04000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F100.00000
G01 X-48.50201 Y-7.37705
G01 X-44.50293 Y-7.07906
G01 X-44.09890 Y-7.05203
G01 X-42.37444 Y-6.95033
G01 X-41.18877 Y-6.90463
G01 X-40.37599 Y-6.89686
G01 X-39.73307 Y-6.91330
G01 X-38.99527 Y-6.95769
G01 X-38.60472 Y-6.95769
G01 X-38.43807 Y-6.94949
G01 X-38.04191 Y-6.91037
G01 X-37.87529 Y-6.88566
G01 X-37.54999 Y-6.82429
G01 X-37.06652 Y-6.93839
G01 X-36.50859 Y-7.09341
G01 X-35.90483 Y-7.28678
G01 X-35.30989 Y-7.49816
G01 X-34.39998 Y-8.21060
G01 X-33.98749 Y-8.55889
G01 X-33.57499 Y-8.94999
G01 X-33.02330 Y-9.49820
G01 X-32.92907 Y-10.07410
G01 X-32.79760 Y-10.64997
G01 X-32.58505 Y-11.46536
G01 X-32.42409 Y-11.83508
G01 X-31.94802 Y-12.89167
G01 X-31.61317 Y-13.60998
G01 X-31.15340 Y-14.24991
G01 X-29.99748 Y-15.81777
G01 X-29.32803 Y-15.92008
G01 X-28.28199 Y-15.85826
G01 X-27.63705 Y-15.84041
G01 X-26.99210 Y-15.85026
G01 X-25.71016 Y-17.11300
G01 X-24.73422 Y-17.69138
G01 X-24.05395 Y-18.08615
G01 X-23.51588 Y-18.40537
G01 X-22.25170 Y-19.13948
G01 X-20.78787 Y-19.41121
G01 X-19.86110 Y-19.57857
G01 X-18.59999 Y-19.79938
G01 X-17.18056 Y-19.48627
G01 X-16.70012 Y-19.37535
G01 X-16.25316 Y-19.49785
G01 X-15.83372 Y-19.60588
G01 X-15.35847 Y-19.73425
G01 X-14.99997 Y-19.82513
G01 X-14.46124 Y-19.75437
G01 X-14.08402 Y-19.69900
G01 X-13.56644 Y-19.62955
G01 X-12.43106 Y-19.46488
G01 X-11.72629 Y-17.91696
G01 X-11.29683 Y-16.94998
G01 X-0.00000 Y-16.94998
G01 X-0.00000 Y-47.99998
G01 X-48.50125 Y-48.01842
G01 X-48.50125 Y-40.41841
G01 X-43.19999 Y-40.40000
G01 X-43.19999 Y-8.39998
G01 X-48.50201 Y-8.42940
G01 X-48.50201 Y-0.02941
G01 X-35.31207 Y-0.02141
G01 X-37.54999 Y-0.02276
G01 X-37.54999 Y-6.82429
G01 X-37.54999 Y-5.77936
G01 X-37.54999 Y-6.82429
G01 X-37.06652 Y-6.93839
G01 X-36.50859 Y-7.09341
G01 X-35.90483 Y-7.28678
G01 X-35.30989 Y-7.49816
G01 X-35.27712 Y-6.21561
G01 X-35.26234 Y-5.88975
G01 X-35.24034 Y-5.54741
G01 X-35.21862 Y-5.31124
G01 X-35.17572 Y-4.98582
G01 X-35.13473 Y-4.77269
G01 X-35.09183 Y-4.57850
G01 X-35.06714 Y-4.41190
G01 X-35.05914 Y-4.33090
G01 X-35.05096 Y-4.16428
G01 X-35.04999 Y-3.87500
G01 X-35.05914 Y-3.66906
G01 X-35.06711 Y-3.58808
G01 X-35.09183 Y-3.42146
G01 X-35.13470 Y-3.22732
G01 X-35.17577 Y-3.01394
G01 X-35.21862 Y-2.68874
G01 X-35.24034 Y-2.45255
G01 X-35.26231 Y-2.11051
G01 X-35.27709 Y-1.78471
G01 X-35.30288 Y-0.87447
G01 X-35.31207 Y-0.02141
G01 X-0.00000 Y0.00000
G01 X-0.00000 Y-14.40998
G01 X-0.00000 Y-12.25941
G01 X-1.99898 Y-12.23800
G01 X-2.52453 Y-12.22324
G01 X-3.29921 Y-12.18651
G01 X-3.60644 Y-12.16180
G01 X-3.89537 Y-12.12781
G01 X-4.11295 Y-12.09081
G01 X-4.26306 Y-12.05649
G01 X-4.54142 Y-11.97247
G01 X-4.70807 Y-11.93071
G01 X-4.80052 Y-11.91227
G01 X-4.96717 Y-11.88756
G01 X-5.05209 Y-11.87917
G01 X-5.21871 Y-11.87099
G01 X-5.30123 Y-11.87099
G01 X-5.46788 Y-11.87917
G01 X-5.55282 Y-11.88756
G01 X-5.71944 Y-11.91227
G01 X-5.81188 Y-11.93071
G01 X-5.97852 Y-11.97247
G01 X-6.25686 Y-12.05649
G01 X-6.52996 Y-12.11466
G01 X-6.60085 Y-12.04806
G01 X-6.77466 Y-11.86998
G01 X-11.29683 Y-11.86998
G01 X-11.68253 Y-12.73995
G01 X-16.57744 Y-12.73995
G01 X-16.67251 Y-12.65997
G01 X-16.57667 Y-7.60481
G01 X-16.00832 Y-7.36267
G01 X-15.97713 Y-6.21561
G01 X-15.96235 Y-5.88975
G01 X-15.93205 Y-5.43936
G01 X-15.89585 Y-5.12285
G01 X-15.87574 Y-4.98582
G01 X-15.83472 Y-4.77269
G01 X-15.79184 Y-4.57858
G01 X-15.76713 Y-4.41195
G01 X-15.75913 Y-4.33090
G01 X-15.74998 Y-4.12499
G01 X-15.74998 Y-3.87500
G01 X-15.75913 Y-3.66906
G01 X-15.76713 Y-3.58803
G01 X-15.79184 Y-3.42138
G01 X-15.84716 Y-3.16433
G01 X-15.87576 Y-3.01394
G01 X-15.89583 Y-2.87729
G01 X-15.93210 Y-2.56022
G01 X-15.96233 Y-2.11051
G01 X-15.97711 Y-1.78471
G01 X-16.00286 Y-0.87475
G01 X-16.01216 Y-0.00970
G01 X-18.24998 Y-0.01105
G01 X-18.24998 Y-7.09620
G01 X-19.27967 Y-7.21197
G01 X-19.89501 Y-7.28591
G01 X-20.74997 Y-7.39503
G01 X-20.74997 Y-0.01257
G01 X-24.10351 Y-0.01460
G01 X-24.25685 Y-0.60018
G01 X-24.33010 Y-0.90454
G01 X-24.48022 Y-1.48016
G01 X-24.53033 Y-1.69047
G01 X-24.65649 Y-2.17411
G01 X-24.69561 Y-2.33972
G01 X-24.81001 Y-2.77818
G01 X-25.03442 Y-3.66997
G01 X-24.97813 Y-3.99705
G01 X-24.92708 Y-4.32953
G01 X-24.79078 Y-5.32008
G01 X-24.76157 Y-5.50639
G01 X-24.71755 Y-5.84484
G01 X-24.76157 Y-5.50639
G01 X-24.79078 Y-5.32008
G01 X-24.92708 Y-4.32953
G01 X-24.97813 Y-3.99705
G01 X-25.03442 Y-3.66997
G01 X-30.66539 Y-3.66997
G01 X-30.71962 Y-3.96738
G01 X-30.74434 Y-4.13400
G01 X-30.78660 Y-4.56212
G01 X-30.81381 Y-5.15313
G01 X-30.85978 Y-5.84535
G01 X-30.53542 Y-5.85671
G01 X-29.76039 Y-5.89344
G01 X-29.45321 Y-5.91817
G01 X-29.16469 Y-5.95211
G01 X-28.94711 Y-5.98912
G01 X-28.79689 Y-6.02346
G01 X-28.51854 Y-6.10748
G01 X-28.35189 Y-6.14924
G01 X-28.25943 Y-6.16768
G01 X-28.09278 Y-6.19239
G01 X-28.00787 Y-6.20078
G01 X-27.84124 Y-6.20895
G01 X-27.75872 Y-6.20895
G01 X-27.59207 Y-6.20078
G01 X-27.50716 Y-6.19239
G01 X-27.34051 Y-6.16768
G01 X-27.24800 Y-6.14924
G01 X-27.08140 Y-6.10748
G01 X-26.80310 Y-6.02346
G01 X-26.65296 Y-5.98914
G01 X-26.43538 Y-5.95213
G01 X-26.14673 Y-5.91817
G01 X-25.83952 Y-5.89344
G01 X-25.06452 Y-5.85671
G01 X-24.71755 Y-5.84484
G01 X-24.57907 Y-6.13392
G01 X-24.35873 Y-6.62998
G01 X-24.21031 Y-6.94944
G01 X-23.90673 Y-7.51566
G01 X-23.80686 Y-7.68226
G01 X-23.37328 Y-8.32996
G01 X-23.11682 Y-8.68929
G01 X-23.31773 Y-9.60577
G01 X-23.53561 Y-10.51784
G01 X-23.80498 Y-11.56627
G01 X-24.10369 Y-12.65997
G01 X-23.80498 Y-11.56627
G01 X-23.53561 Y-10.51784
G01 X-23.31773 Y-9.60577
G01 X-23.11682 Y-8.68929
G01 X-21.71045 Y-7.91421
G01 X-20.74997 Y-7.39503
G01 X-19.89501 Y-7.28591
G01 X-19.27967 Y-7.21197
G01 X-18.24998 Y-7.09620
G01 X-17.26451 Y-7.39292
G01 X-16.57667 Y-7.60481
G01 X-16.00832 Y-7.36267
G01 X-15.37843 Y-7.30352
G01 X-15.10000 Y-7.27324
G01 X-14.80967 Y-7.24969
G01 X-14.67244 Y-7.24294
G01 X-14.22745 Y-7.24294
G01 X-14.09024 Y-7.24969
G01 X-13.90000 Y-7.26303
G01 X-13.49845 Y-7.29915
G01 X-12.84704 Y-7.34675
G01 X-12.05695 Y-7.39211
G01 X-11.04948 Y-7.43715
G01 X-11.07232 Y-8.02203
G01 X-11.09030 Y-8.32635
G01 X-11.10727 Y-8.73801
G01 X-11.13754 Y-9.26701
G01 X-11.14694 Y-9.49736
G01 X-11.22657 Y-10.85372
G01 X-11.27321 Y-11.56675
G01 X-11.29683 Y-11.86998
G01 X-11.68253 Y-12.73995
G01 X-11.23909 Y-14.09639
G01 X-11.14011 Y-14.40998
G01 X-11.18568 Y-15.26278
G01 X-11.22657 Y-15.93372
G01 X-11.27321 Y-16.64675
G01 X-11.29683 Y-16.94998
G01 X-11.27321 Y-16.64675
G01 X-11.22657 Y-15.93372
G01 X-11.18568 Y-15.26278
G01 X-11.14011 Y-14.40998
G01 X-0.00000 Y-14.40998
G01 X-0.00000 Y-19.38020
G01 X-0.45143 Y-19.59132
G01 X-1.19934 Y-19.95424
G01 X-1.54125 Y-20.11314
G01 X-2.10833 Y-20.38855
G01 X-2.35016 Y-20.50034
G01 X-2.82534 Y-20.73123
G01 X-3.01823 Y-20.82005
G01 X-3.44871 Y-21.02924
G01 X-4.19999 Y-21.38553
G01 X-4.56722 Y-21.34293
G01 X-4.87266 Y-21.30229
G01 X-6.52996 Y-21.09866
G01 X-7.79996 Y-21.48088
G01 X-7.79996 Y-38.80498
G01 X-7.10001 Y-39.46837
G01 X-6.91723 Y-39.63693
G01 X-6.64322 Y-39.90025
G01 X-6.40123 Y-40.12415
G01 X-5.99996 Y-40.50744
G01 X-5.59872 Y-40.12415
G01 X-5.35673 Y-39.90025
G01 X-5.08272 Y-39.63693
G01 X-4.89974 Y-39.46820
G01 X-4.19999 Y-38.80498
G01 X-4.19997 Y-33.08998
G01 X-22.19112 Y-33.08998
G01 X-22.21499 Y-33.12348
G01 X-25.76286 Y-33.12348
G01 X-25.78727 Y-33.09028
G01 X-36.42921 Y-33.08998
G01 X-36.46701 Y-33.03745
G01 X-39.98034 Y-33.03745
G01 X-40.03317 Y-33.11195
G01 X-43.19999 Y-33.11195
G01 X-43.19999 Y-35.65195
G01 X-40.03317 Y-35.65195
G01 X-39.98034 Y-35.57745
G01 X-36.46701 Y-35.57745
G01 X-36.42921 Y-35.62998
G01 X-25.78727 Y-35.63028
G01 X-25.76286 Y-35.66348
G01 X-22.21499 Y-35.66348
G01 X-22.19112 Y-35.62998
G01 X-0.00000 Y-35.62998
G01 X-0.00000 Y-33.08998
G01 X-4.19997 Y-33.08998
G01 X-4.19999 Y-21.38553

G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z5.000000 ( retract )

G04 P1.000000
M9 ( Coolant off. )