latest update, added box

README.org

@@ -18,3 +18,16 @@
 + [X] XT60 or XT30 :: will review the footprint later
 + [X] Mini 360 DC/DC step-down
 + [ ]
+
+
+
+* Maro takes over!
+8p8c is now https://gsm-komplekt.ua/ua/product/87298/
+removing all unneaded funtionality
+
+leaving over:
+
+4 servo outputs
+LoRa = rx,tx,sbus
+Camera = VIDEO
+FTP is now mandatory, ground on shield

breakboard/breakboard.kicad_prl

@@ -1,11 +1,11 @@
 {
   "board": {
     "active_layer": 0,
-    "active_layer_preset": "All Layers",
+    "active_layer_preset": "",
     "auto_track_width": true,
     "hidden_netclasses": [],
     "hidden_nets": [],
-    "high_contrast_mode": 1,
+    "high_contrast_mode": 0,
     "net_color_mode": 1,
     "opacity": {
       "images": 0.6,
@@ -64,7 +64,7 @@
       39,
       40
     ],
-    "visible_layers": "fffffff_ffffffff",
+    "visible_layers": "ffdffff_ffffffff",
     "zone_display_mode": 0
   },
   "git": {

breakboard/breakboard.kicad_pro

@@ -48,7 +48,7 @@
         "silk_text_thickness": 0.1,
         "silk_text_upright": false,
         "zones": {
-          "min_clearance": 0.7
+          "min_clearance": 0.5
         }
       },
       "diff_pair_dimensions": [
@@ -181,7 +181,7 @@
         0.0,
         0.2,
         1.0,
-        2.0
+        1.6
       ],
       "tuning_pattern_settings": {
         "diff_pair_defaults": {
@@ -454,7 +454,7 @@
     "classes": [
       {
         "bus_width": 12,
-        "clearance": 0.2,
+        "clearance": 0.5,
         "diff_pair_gap": 0.25,
         "diff_pair_via_gap": 0.25,
         "diff_pair_width": 0.2,
@@ -464,7 +464,7 @@
         "name": "Default",
         "pcb_color": "rgba(0, 0, 0, 0.000)",
         "schematic_color": "rgba(0, 0, 0, 0.000)",
-        "track_width": 0.2,
+        "track_width": 0.6,
         "via_diameter": 0.6,
         "via_drill": 0.3,
         "wire_width": 6
@@ -482,7 +482,7 @@
       "gencad": "",
       "idf": "",
       "netlist": "",
-      "plot": "../../../../modellib/breakboard/",
+      "plot": "gerber/",
       "pos_files": "",
       "specctra_dsn": "",
       "step": "../../../../modellib/breakboard/breakboard.step",
@@ -493,6 +493,7 @@
   },
   "schematic": {
     "annotate_start_num": 0,
+    "bom_export_filename": "",
     "bom_fmt_presets": [],
     "bom_fmt_settings": {
       "field_delimiter": ",",

breakboard/gerber/breakboard-B_Cu.gbl

@@ -0,0 +1,394 @@
+%TF.GenerationSoftware,KiCad,Pcbnew,8.0.4-8.0.4-0~ubuntu24.04.1*%
+%TF.CreationDate,2024-08-12T20:02:10+03:00*%
+%TF.ProjectId,breakboard,62726561-6b62-46f6-9172-642e6b696361,rev?*%
+%TF.SameCoordinates,Original*%
+%TF.FileFunction,Copper,L2,Bot*%
+%TF.FilePolarity,Positive*%
+%FSLAX46Y46*%
+G04 Gerber Fmt 4.6, Leading zero omitted, Abs format (unit mm)*
+G04 Created by KiCad (PCBNEW 8.0.4-8.0.4-0~ubuntu24.04.1) date 2024-08-12 20:02:10*
+%MOMM*%
+%LPD*%
+G01*
+G04 APERTURE LIST*
+G04 Aperture macros list*
+%AMRoundRect*
+0 Rectangle with rounded corners*
+0 $1 Rounding radius*
+0 $2 $3 $4 $5 $6 $7 $8 $9 X,Y pos of 4 corners*
+0 Add a 4 corners polygon primitive as box body*
+4,1,4,$2,$3,$4,$5,$6,$7,$8,$9,$2,$3,0*
+0 Add four circle primitives for the rounded corners*
+1,1,$1+$1,$2,$3*
+1,1,$1+$1,$4,$5*
+1,1,$1+$1,$6,$7*
+1,1,$1+$1,$8,$9*
+0 Add four rect primitives between the rounded corners*
+20,1,$1+$1,$2,$3,$4,$5,0*
+20,1,$1+$1,$4,$5,$6,$7,0*
+20,1,$1+$1,$6,$7,$8,$9,0*
+20,1,$1+$1,$8,$9,$2,$3,0*%
+G04 Aperture macros list end*
+%TA.AperFunction,ComponentPad*%
+%ADD10O,2.000000X2.500000*%
+%TD*%
+%TA.AperFunction,ComponentPad*%
+%ADD11R,1.700000X1.700000*%
+%TD*%
+%TA.AperFunction,ComponentPad*%
+%ADD12O,1.700000X1.700000*%
+%TD*%
+%TA.AperFunction,ComponentPad*%
+%ADD13O,1.950000X1.700000*%
+%TD*%
+%TA.AperFunction,ComponentPad*%
+%ADD14RoundRect,0.250000X-0.725000X0.600000X-0.725000X-0.600000X0.725000X-0.600000X0.725000X0.600000X0*%
+%TD*%
+%TA.AperFunction,ComponentPad*%
+%ADD15RoundRect,0.250000X-0.600000X-0.600000X0.600000X-0.600000X0.600000X0.600000X-0.600000X0.600000X0*%
+%TD*%
+%TA.AperFunction,ComponentPad*%
+%ADD16RoundRect,0.250000X0.725000X-0.600000X0.725000X0.600000X-0.725000X0.600000X-0.725000X-0.600000X0*%
+%TD*%
+%TA.AperFunction,ComponentPad*%
+%ADD17RoundRect,0.248000X0.552000X-0.552000X0.552000X0.552000X-0.552000X0.552000X-0.552000X-0.552000X0*%
+%TD*%
+%TA.AperFunction,ComponentPad*%
+%ADD18C,1.600000*%
+%TD*%
+%TA.AperFunction,ComponentPad*%
+%ADD19C,2.200000*%
+%TD*%
+%TA.AperFunction,ComponentPad*%
+%ADD20C,2.300000*%
+%TD*%
+%TA.AperFunction,ComponentPad*%
+%ADD21RoundRect,0.250000X0.900000X-0.900000X0.900000X0.900000X-0.900000X0.900000X-0.900000X-0.900000X0*%
+%TD*%
+G04 APERTURE END LIST*
+D10*
+%TO.P,Mini360,1,IN-*%
+%TO.N,GND*%
+X113250000Y-69878436D03*
+X113250000Y-68250000D03*
+%TO.P,Mini360,2,IN+*%
+%TO.N,12V*%
+X113250000Y-83250000D03*
+X113250000Y-81750000D03*
+%TO.P,Mini360,3,OUT-*%
+%TO.N,GND*%
+X85180000Y-69750000D03*
+X85180000Y-68250000D03*
+%TO.P,Mini360,4,OUT+*%
+%TO.N,5V*%
+X85250000Y-83250000D03*
+X85250000Y-81750000D03*
+%TD*%
+D11*
+%TO.P,Srv6,1,GND*%
+%TO.N,GND*%
+X155500000Y-66750000D03*
+D12*
+%TO.P,Srv6,2,5v*%
+%TO.N,RX1*%
+X155500000Y-69290000D03*
+%TO.P,Srv6,3,PWM*%
+%TO.N,RX2*%
+X155500000Y-71830000D03*
+%TD*%
+D11*
+%TO.P,Srv4,1,GND*%
+%TO.N,GND*%
+X139950000Y-81330000D03*
+D12*
+%TO.P,Srv4,2,5v*%
+%TO.N,5V*%
+X139950000Y-78790000D03*
+%TO.P,Srv4,3,PWM*%
+%TO.N,OUT4*%
+X139950000Y-76250000D03*
+%TD*%
+D13*
+%TO.P,IN2,10,Pin_10*%
+%TO.N,12V*%
+X176000000Y-87250000D03*
+%TO.P,IN2,9,Pin_9*%
+%TO.N,RX4*%
+X176000000Y-84750000D03*
+%TO.P,IN2,8,Pin_8*%
+%TO.N,RX3*%
+X176000000Y-82250000D03*
+%TO.P,IN2,7,Pin_7*%
+%TO.N,RX2*%
+X176000000Y-79750000D03*
+%TO.P,IN2,6,Pin_6*%
+%TO.N,RX1*%
+X176000000Y-77250000D03*
+%TO.P,IN2,5,Pin_5*%
+%TO.N,IN4*%
+X176000000Y-74750000D03*
+%TO.P,IN2,4,Pin_4*%
+%TO.N,IN3*%
+X176000000Y-72250000D03*
+%TO.P,IN2,3,Pin_3*%
+%TO.N,IN2*%
+X176000000Y-69750000D03*
+%TO.P,IN2,2,Pin_2*%
+%TO.N,IN1*%
+X176000000Y-67250000D03*
+D14*
+%TO.P,IN2,1,Pin_1*%
+%TO.N,GND*%
+X176000000Y-64750000D03*
+%TD*%
+D12*
+%TO.P,Opto1,12,OUT4*%
+%TO.N,OUT4*%
+X147750000Y-81330000D03*
+%TO.P,Opto1,11,OUT3*%
+%TO.N,OUT3*%
+X147750000Y-78790000D03*
+%TO.P,Opto1,10,OUT2*%
+%TO.N,OUT2*%
+X147750000Y-76250000D03*
+%TO.P,Opto1,9,OUT1*%
+%TO.N,OUT1*%
+X147750000Y-73710000D03*
+%TO.P,Opto1,8,HVCC*%
+%TO.N,5V*%
+X147750000Y-71170000D03*
+D11*
+%TO.P,Opto1,7,GND*%
+%TO.N,GND*%
+X147750000Y-68630000D03*
+D12*
+%TO.P,Opto1,6,NC*%
+%TO.N,unconnected-(Opto1-NC-Pad6)*%
+X169750000Y-81330000D03*
+D15*
+%TO.P,Opto1,5,IN4*%
+%TO.N,IN4*%
+X169750000Y-78790000D03*
+D12*
+%TO.P,Opto1,4,IN3*%
+%TO.N,IN3*%
+X169750000Y-76250000D03*
+%TO.P,Opto1,3,IN2*%
+%TO.N,IN2*%
+X169750000Y-73710000D03*
+%TO.P,Opto1,2,IN1*%
+%TO.N,IN1*%
+X169750000Y-71170000D03*
+%TO.P,Opto1,1,GND*%
+%TO.N,GND*%
+X169750000Y-68630000D03*
+%TD*%
+D16*
+%TO.P,J2,1,Pin_1*%
+%TO.N,12V*%
+X119250000Y-86500000D03*
+D13*
+%TO.P,J2,2,Pin_2*%
+%TO.N,GND*%
+X119250000Y-84000000D03*
+%TO.P,J2,3,Pin_3*%
+%TO.N,RX3*%
+X119250000Y-81500000D03*
+%TO.P,J2,4,Pin_4*%
+%TO.N,RX2*%
+X119250000Y-79000000D03*
+%TO.P,J2,5,Pin_5*%
+%TO.N,RX1*%
+X119250000Y-76500000D03*
+%TD*%
+D11*
+%TO.P,Srv5,1,GND*%
+%TO.N,GND*%
+X160500000Y-66750000D03*
+D12*
+%TO.P,Srv5,2,5v*%
+%TO.N,5V*%
+X160500000Y-69290000D03*
+%TO.P,Srv5,3,PWM*%
+%TO.N,RX1*%
+X160500000Y-71830000D03*
+%TD*%
+D11*
+%TO.P,Srv1,1,GND*%
+%TO.N,GND*%
+X140000000Y-66750000D03*
+D12*
+%TO.P,Srv1,2,5v*%
+%TO.N,5V*%
+X140000000Y-69290000D03*
+%TO.P,Srv1,3,PWM*%
+%TO.N,OUT1*%
+X140000000Y-71830000D03*
+%TD*%
+D11*
+%TO.P,Srv3,1,GND*%
+%TO.N,GND*%
+X134950000Y-81330000D03*
+D12*
+%TO.P,Srv3,2,5v*%
+%TO.N,5V*%
+X134950000Y-78790000D03*
+%TO.P,Srv3,3,PWM*%
+%TO.N,OUT3*%
+X134950000Y-76250000D03*
+%TD*%
+D13*
+%TO.P,IN1,10,Pin_10*%
+%TO.N,12V*%
+X183250000Y-87250000D03*
+%TO.P,IN1,9,Pin_9*%
+%TO.N,RX4*%
+X183250000Y-84750000D03*
+%TO.P,IN1,8,Pin_8*%
+%TO.N,RX3*%
+X183250000Y-82250000D03*
+%TO.P,IN1,7,Pin_7*%
+%TO.N,RX2*%
+X183250000Y-79750000D03*
+%TO.P,IN1,6,Pin_6*%
+%TO.N,RX1*%
+X183250000Y-77250000D03*
+%TO.P,IN1,5,Pin_5*%
+%TO.N,IN4*%
+X183250000Y-74750000D03*
+%TO.P,IN1,4,Pin_4*%
+%TO.N,IN3*%
+X183250000Y-72250000D03*
+%TO.P,IN1,3,Pin_3*%
+%TO.N,IN2*%
+X183250000Y-69750000D03*
+%TO.P,IN1,2,Pin_2*%
+%TO.N,IN1*%
+X183250000Y-67250000D03*
+D14*
+%TO.P,IN1,1,Pin_1*%
+%TO.N,GND*%
+X183250000Y-64750000D03*
+%TD*%
+D17*
+%TO.P,RJ45,1*%
+%TO.N,IN3*%
+X200610000Y-71270000D03*
+D18*
+%TO.P,RJ45,2*%
+%TO.N,IN2*%
+X203150000Y-72540000D03*
+%TO.P,RJ45,3*%
+%TO.N,IN4*%
+X200610000Y-73810000D03*
+%TO.P,RJ45,4*%
+%TO.N,IN1*%
+X203150000Y-75080000D03*
+%TO.P,RJ45,5*%
+%TO.N,RX1*%
+X200610000Y-76350000D03*
+%TO.P,RJ45,6*%
+%TO.N,RX4*%
+X203150000Y-77620000D03*
+%TO.P,RJ45,7*%
+%TO.N,RX2*%
+X200610000Y-78890000D03*
+%TO.P,RJ45,8*%
+%TO.N,RX3*%
+X203150000Y-80160000D03*
+D19*
+%TO.P,RJ45,SH*%
+%TO.N,GND*%
+X206450000Y-67815000D03*
+X206450000Y-83615000D03*
+%TD*%
+D20*
+%TO.P,J8,1,Pin_1*%
+%TO.N,12V*%
+X81000000Y-82600000D03*
+D21*
+%TO.P,J8,2,Pin_2*%
+%TO.N,GND*%
+X81000000Y-77800000D03*
+%TO.P,J8,3,Pin_3*%
+X81000000Y-73000000D03*
+D20*
+%TO.P,J8,4,Pin_4*%
+%TO.N,5V*%
+X81000000Y-68200000D03*
+%TD*%
+D11*
+%TO.P,Srv2,1,GND*%
+%TO.N,GND*%
+X135000000Y-66750000D03*
+D12*
+%TO.P,Srv2,2,5v*%
+%TO.N,5V*%
+X135000000Y-69290000D03*
+%TO.P,Srv2,3,PWM*%
+%TO.N,OUT2*%
+X135000000Y-71830000D03*
+%TD*%
+D16*
+%TO.P,J3,1,Pin_1*%
+%TO.N,12V*%
+X188975000Y-87250000D03*
+D13*
+%TO.P,J3,2,Pin_2*%
+%TO.N,GND*%
+X188975000Y-84750000D03*
+%TO.P,J3,3,Pin_3*%
+%TO.N,RX4*%
+X188975000Y-82250000D03*
+%TD*%
+D14*
+%TO.P,J4,1,Pin_1*%
+%TO.N,5V*%
+X120250000Y-65500000D03*
+D13*
+%TO.P,J4,2,Pin_2*%
+%TO.N,GND*%
+X120250000Y-68000000D03*
+%TO.P,J4,3,Pin_3*%
+%TO.N,RX3*%
+X120250000Y-70500000D03*
+%TD*%
+D14*
+%TO.P,J1,1,Pin_1*%
+%TO.N,5V*%
+X127250000Y-65750000D03*
+D13*
+%TO.P,J1,2,Pin_2*%
+%TO.N,GND*%
+X127250000Y-68250000D03*
+%TO.P,J1,3,Pin_3*%
+%TO.N,RX2*%
+X127250000Y-70750000D03*
+%TO.P,J1,4,Pin_4*%
+%TO.N,RX1*%
+X127250000Y-73250000D03*
+%TD*%
+D12*
+%TO.P,Srv7,3,PWM*%
+%TO.N,RX3*%
+X155500000Y-76250000D03*
+%TO.P,Srv7,2,5v*%
+%TO.N,unconnected-(Srv7-5v-Pad2)*%
+X155500000Y-78790000D03*
+D11*
+%TO.P,Srv7,1,GND*%
+%TO.N,GND*%
+X155500000Y-81330000D03*
+%TD*%
+%TO.P,Srv8,1,GND*%
+%TO.N,GND*%
+X160500000Y-81330000D03*
+D12*
+%TO.P,Srv8,2,5v*%
+%TO.N,unconnected-(Srv8-5v-Pad2)*%
+X160500000Y-78790000D03*
+%TO.P,Srv8,3,PWM*%
+%TO.N,RX4*%
+X160500000Y-76250000D03*
+%TD*%
+M02*

breakboard/gerber/breakboard-B_Silkscreen.gbo

@@ -0,0 +1,27 @@
+%TF.GenerationSoftware,KiCad,Pcbnew,8.0.4-8.0.4-0~ubuntu24.04.1*%
+%TF.CreationDate,2024-08-12T20:02:10+03:00*%
+%TF.ProjectId,breakboard,62726561-6b62-46f6-9172-642e6b696361,rev?*%
+%TF.SameCoordinates,Original*%
+%TF.FileFunction,Legend,Bot*%
+%TF.FilePolarity,Positive*%
+%FSLAX46Y46*%
+G04 Gerber Fmt 4.6, Leading zero omitted, Abs format (unit mm)*
+G04 Created by KiCad (PCBNEW 8.0.4-8.0.4-0~ubuntu24.04.1) date 2024-08-12 20:02:10*
+%MOMM*%
+%LPD*%
+G01*
+G04 APERTURE LIST*
+%ADD10C,0.120000*%
+G04 APERTURE END LIST*
+D10*
+%TO.C,J6*%
+X224300000Y-63550000D02*
+X227200000Y-63550000D01*
+X224300000Y-66450000D02*
+X224300000Y-63550000D01*
+X227200000Y-63550000D02*
+X227200000Y-66450000D01*
+X227200000Y-66450000D02*
+X224300000Y-66450000D01*
+%TD*%
+M02*

breakboard/gerber/breakboard-Edge_Cuts.gm1

@@ -0,0 +1,23 @@
+%TF.GenerationSoftware,KiCad,Pcbnew,8.0.4-8.0.4-0~ubuntu24.04.1*%
+%TF.CreationDate,2024-08-12T20:02:11+03:00*%
+%TF.ProjectId,breakboard,62726561-6b62-46f6-9172-642e6b696361,rev?*%
+%TF.SameCoordinates,Original*%
+%TF.FileFunction,Profile,NP*%
+%FSLAX46Y46*%
+G04 Gerber Fmt 4.6, Leading zero omitted, Abs format (unit mm)*
+G04 Created by KiCad (PCBNEW 8.0.4-8.0.4-0~ubuntu24.04.1) date 2024-08-12 20:02:11*
+%MOMM*%
+%LPD*%
+G01*
+G04 APERTURE LIST*
+%TA.AperFunction,Profile*%
+%ADD10C,0.200000*%
+%TD*%
+G04 APERTURE END LIST*
+D10*
+X78000000Y-62750000D02*
+X228000000Y-62750000D01*
+X228000000Y-88750000D01*
+X78000000Y-88750000D01*
+X78000000Y-62750000D01*
+M02*

breakboard/gerber/breakboard-NPTH.drl

@@ -0,0 +1,19 @@
+M48
+; DRILL file {KiCad 8.0.4-8.0.4-0~ubuntu24.04.1} date 2024-08-12T20:15:16+0300
+; FORMAT={-:-/ absolute / metric / decimal}
+; #@! TF.CreationDate,2024-08-12T20:15:16+03:00
+; #@! TF.GenerationSoftware,Kicad,Pcbnew,8.0.4-8.0.4-0~ubuntu24.04.1
+; #@! TF.FileFunction,NonPlated,1,2,NPTH
+FMAT,2
+METRIC
+; #@! TA.AperFunction,NonPlated,NPTH,ComponentDrill
+T1C3.250
+%
+G90
+G05
+T1
+X209.5Y-70.0
+X209.5Y-81.43
+X224.896Y-69.768
+X225.0Y-81.5
+M30

breakboard/gerber/breakboard-PTH.drl

@@ -0,0 +1,123 @@
+M48
+; DRILL file {KiCad 8.0.4-8.0.4-0~ubuntu24.04.1} date 2024-08-12T20:15:16+0300
+; FORMAT={-:-/ absolute / metric / decimal}
+; #@! TF.CreationDate,2024-08-12T20:15:16+03:00
+; #@! TF.GenerationSoftware,Kicad,Pcbnew,8.0.4-8.0.4-0~ubuntu24.04.1
+; #@! TF.FileFunction,Plated,1,2,PTH
+FMAT,2
+METRIC
+; #@! TA.AperFunction,Plated,PTH,ComponentDrill
+T1C0.762
+; #@! TA.AperFunction,Plated,PTH,ComponentDrill
+T2C0.900
+; #@! TA.AperFunction,Plated,PTH,ComponentDrill
+T3C0.950
+; #@! TA.AperFunction,Plated,PTH,ComponentDrill
+T4C1.000
+; #@! TA.AperFunction,Plated,PTH,ComponentDrill
+T5C1.100
+; #@! TA.AperFunction,Plated,PTH,ComponentDrill
+T6C1.600
+%
+G90
+G05
+T1
+X85.18Y-68.25
+X85.18Y-69.75
+X85.25Y-81.75
+X85.25Y-83.25
+X113.25Y-68.25
+X113.25Y-69.878
+X113.25Y-81.75
+X113.25Y-83.25
+T2
+X200.61Y-71.27
+X200.61Y-73.81
+X200.61Y-76.35
+X200.61Y-78.89
+X203.15Y-72.54
+X203.15Y-75.08
+X203.15Y-77.62
+X203.15Y-80.16
+T3
+X119.25Y-76.5
+X119.25Y-79.0
+X119.25Y-81.5
+X119.25Y-84.0
+X119.25Y-86.5
+X120.25Y-65.5
+X120.25Y-68.0
+X120.25Y-70.5
+X127.25Y-65.75
+X127.25Y-68.25
+X127.25Y-70.75
+X127.25Y-73.25
+X176.0Y-64.75
+X176.0Y-67.25
+X176.0Y-69.75
+X176.0Y-72.25
+X176.0Y-74.75
+X176.0Y-77.25
+X176.0Y-79.75
+X176.0Y-82.25
+X176.0Y-84.75
+X176.0Y-87.25
+X183.25Y-64.75
+X183.25Y-67.25
+X183.25Y-69.75
+X183.25Y-72.25
+X183.25Y-74.75
+X183.25Y-77.25
+X183.25Y-79.75
+X183.25Y-82.25
+X183.25Y-84.75
+X183.25Y-87.25
+X188.975Y-82.25
+X188.975Y-84.75
+X188.975Y-87.25
+T4
+X134.95Y-76.25
+X134.95Y-78.79
+X134.95Y-81.33
+X135.0Y-66.75
+X135.0Y-69.29
+X135.0Y-71.83
+X139.95Y-76.25
+X139.95Y-78.79
+X139.95Y-81.33
+X140.0Y-66.75
+X140.0Y-69.29
+X140.0Y-71.83
+X147.75Y-68.63
+X147.75Y-71.17
+X147.75Y-73.71
+X147.75Y-76.25
+X147.75Y-78.79
+X147.75Y-81.33
+X155.5Y-66.75
+X155.5Y-69.29
+X155.5Y-71.83
+X155.5Y-76.25
+X155.5Y-78.79
+X155.5Y-81.33
+X160.5Y-66.75
+X160.5Y-69.29
+X160.5Y-71.83
+X160.5Y-76.25
+X160.5Y-78.79
+X160.5Y-81.33
+X169.75Y-68.63
+X169.75Y-71.17
+X169.75Y-73.71
+X169.75Y-76.25
+X169.75Y-78.79
+X169.75Y-81.33
+T5
+X81.0Y-68.2
+X81.0Y-73.0
+X81.0Y-77.8
+X81.0Y-82.6
+T6
+X206.45Y-67.815
+X206.45Y-83.615
+M30

breakboard/gerber/cnc.sh

@@ -0,0 +1,35 @@
+#!/bin/sh
+
+/usr/bin/pcb2gcode  --voronoi=1 --onedrill --nom6 \
+--back *-B_Cu.gbl \
+--front *-F_Cu.gtl \
+--drill *-PTH.drl \
+--outline *-Edge_Cuts.gm1 \
+--metric --metricoutput --optimise  \
+--zsafe 5 --zchange 5 --zcut -1.6 --cutter-diameter 3 --zdrill -1.65  \
+--drill-feed 400 --drill-speed 24000 --offset 0.0 --mill-feed 100 --mill-speed 24000 --cut-feed 100 \
+--cut-speed 24000  --zwork -0.04 --cut-infeed 2 --fill-outline=true \
+--basename pcb \
+--vectorial 
+#--preamble /home/giver/Focus/pcb/pcb2metalab/preamble.ngc \
+#--postamble /home/giver/Focus/pcb/pcb2metalab/postamble.ngc \
+
+
+
+
+/usr/bin/pcb2gcode     --milldrill-diameter 3 --nom6 --min-milldrill-hole-diameter=3mm \
+--drill *-NPTH.drl \
+--outline *-Edge_Cuts.gm1 \
+--metric --metricoutput --optimise --onedrill \
+--zwork -0.02 --zsafe 5 --zchange 5 --zcut -1.6 --cutter-diameter 3 --zdrill -1.65  \
+--drill-feed 400 --drill-speed 24000 --offset 0.5 --mill-feed 50 --mill-speed 24000 --cut-feed 100 \
+--cut-speed 24000 --cut-infeed 2 \
+--basename pcb --nog81 1 \
+--vectorial   --bridges=0.5000 
+
+#--preamble /home/giver/Focus/pcb/pcb2metalab/preamble.ngc \
+#--postamble /home/giver/Focus/pcb/pcb2metalab/postamble.ngc \
+for a in *ngc; do
+    sed "/M[025].*/d" < $a > $a.tap
+done
+rm *svg *ngc

breakboard/gerber/pcb_drill.ngc.tap

@@ -0,0 +1,119 @@
+( pcb2gcode 2.5.0 )
+( Software-independent Gcode )
+
+( This file uses only one drill bit. Forced by 'onedrill' option )
+
+G94       (Millimeters per minute feed rate.)
+G21       (Units == Millimeters.)
+G91.1     (Incremental arc distance mode.)
+G90       (Absolute coordinates.)
+G00 S24000     (RPM spindle speed.)
+
+G00 Z5.00000 (Retract)
+T1
+G04 P1.00000
+(MSG, Change tool bit to drill size 0.762mm)
+M3      (Spindle on clockwise.)
+G0 Z5.00000
+G04 P1.00000
+
+G81 R5.00000 Z-1.65000 F400.00000 X81.00000 Y-68.20000
+X85.18000 Y-68.25000
+X85.18000 Y-69.75000
+X81.00000 Y-73.00000
+X81.00000 Y-77.80000
+X81.00000 Y-82.60000
+X85.25000 Y-83.25000
+X85.25000 Y-81.75000
+X113.25000 Y-83.25000
+X113.25000 Y-81.75000
+X119.25000 Y-86.50000
+X119.25000 Y-84.00000
+X119.25000 Y-81.50000
+X119.25000 Y-79.00000
+X119.25000 Y-76.50000
+X113.25000 Y-69.87800
+X113.25000 Y-68.25000
+X120.25000 Y-70.50000
+X120.25000 Y-68.00000
+X120.25000 Y-65.50000
+X127.25000 Y-65.75000
+X127.25000 Y-68.25000
+X127.25000 Y-70.75000
+X127.25000 Y-73.25000
+X134.95000 Y-76.25000
+X134.95000 Y-78.79000
+X134.95000 Y-81.33000
+X139.95000 Y-81.33000
+X139.95000 Y-78.79000
+X135.00000 Y-71.83000
+X135.00000 Y-69.29000
+X135.00000 Y-66.75000
+X140.00000 Y-66.75000
+X140.00000 Y-69.29000
+X140.00000 Y-71.83000
+X139.95000 Y-76.25000
+X147.75000 Y-68.63000
+X147.75000 Y-71.17000
+X147.75000 Y-73.71000
+X147.75000 Y-76.25000
+X147.75000 Y-78.79000
+X147.75000 Y-81.33000
+X155.50000 Y-76.25000
+X155.50000 Y-78.79000
+X155.50000 Y-81.33000
+X160.50000 Y-81.33000
+X160.50000 Y-78.79000
+X155.50000 Y-71.83000
+X155.50000 Y-69.29000
+X155.50000 Y-66.75000
+X160.50000 Y-66.75000
+X160.50000 Y-69.29000
+X160.50000 Y-71.83000
+X160.50000 Y-76.25000
+X169.75000 Y-81.33000
+X169.75000 Y-78.79000
+X169.75000 Y-76.25000
+X169.75000 Y-73.71000
+X169.75000 Y-71.17000
+X169.75000 Y-68.63000
+X176.00000 Y-74.75000
+X176.00000 Y-72.25000
+X176.00000 Y-69.75000
+X176.00000 Y-67.25000
+X176.00000 Y-64.75000
+X183.25000 Y-64.75000
+X183.25000 Y-67.25000
+X183.25000 Y-69.75000
+X183.25000 Y-72.25000
+X183.25000 Y-74.75000
+X183.25000 Y-77.25000
+X183.25000 Y-79.75000
+X176.00000 Y-77.25000
+X176.00000 Y-79.75000
+X176.00000 Y-82.25000
+X176.00000 Y-84.75000
+X176.00000 Y-87.25000
+X183.25000 Y-82.25000
+X183.25000 Y-84.75000
+X183.25000 Y-87.25000
+X188.97500 Y-82.25000
+X188.97500 Y-84.75000
+X188.97500 Y-87.25000
+X200.61000 Y-78.89000
+X206.45000 Y-83.61500
+X203.15000 Y-80.16000
+X203.15000 Y-77.62000
+X200.61000 Y-76.35000
+X203.15000 Y-75.08000
+X200.61000 Y-73.81000
+X200.61000 Y-71.27000
+X203.15000 Y-72.54000
+X206.45000 Y-67.81500
+G80
+
+G00 Z5.000 ( All done -- retract )
+
+G04 P1.000000
+M9      (Coolant off.)
+

breakboard/gerber/pcb_milldrill.ngc.tap

@@ -0,0 +1,54 @@
+( pcb2gcode 2.5.0 )
+( Software-independent Gcode )
+( This file uses a mill head of 3.00000mm to drill the 1 hole sizes. )
+( Hole sizes: [3.25mm] )
+
+G94       (Millimeters per minute feed rate.)
+G21       (Units == Millimeters.)
+G91.1     (Incremental arc distance mode.)
+G90       (Absolute coordinates.)
+S24000    (RPM spindle speed.)
+
+G01 F100.00000 (Feedrate)
+G00 Z5.00000 (Retract to tool change height)
+T1
+G04 P1.00000
+(MSG, Change tool bit to drill size 3.00000mm)
+M6        (Tool change.)
+M3        (Spindle on clockwise.)
+G04 P1.00000
+G00 Z5.00000
+
+G0 X209.62500 Y-70.00000
+G1 Z1.65000 F50.00000
+G2 X209.62500 Y-70.00000 Z-0.00000 I-0.12500 J0.00000
+G2 X209.62500 Y-70.00000 Z-1.65000 I-0.12500 J0.00000
+G2 X209.62500 Y-70.00000 I-0.12500 J0.00000
+G1 Z5.00000 F50.00000
+
+G0 X209.62500 Y-81.43000
+G1 Z1.65000 F50.00000
+G2 X209.62500 Y-81.43000 Z-0.00000 I-0.12500 J0.00000
+G2 X209.62500 Y-81.43000 Z-1.65000 I-0.12500 J0.00000
+G2 X209.62500 Y-81.43000 I-0.12500 J0.00000
+G1 Z5.00000 F50.00000
+
+G0 X225.02100 Y-69.76800
+G1 Z1.65000 F50.00000
+G2 X225.02100 Y-69.76800 Z-0.00000 I-0.12500 J0.00000
+G2 X225.02100 Y-69.76800 Z-1.65000 I-0.12500 J0.00000
+G2 X225.02100 Y-69.76800 I-0.12500 J0.00000
+G1 Z5.00000 F50.00000
+
+G0 X225.12500 Y-81.50000
+G1 Z1.65000 F50.00000
+G2 X225.12500 Y-81.50000 Z-0.00000 I-0.12500 J0.00000
+G2 X225.12500 Y-81.50000 Z-1.65000 I-0.12500 J0.00000
+G2 X225.12500 Y-81.50000 I-0.12500 J0.00000
+G1 Z5.00000 F50.00000
+
+G00 Z5.000000 ( All done -- retract )
+
+G04 P1.000000
+M9      (Coolant off.)
+

breakboard/gerber/pcb_outline.ngc.tap

@@ -0,0 +1,78 @@
+( pcb2gcode 2.5.0 )
+( Software-independent Gcode )
+
+G94 ( Millimeters per minute feed rate. )
+G21 ( Units == Millimeters. )
+
+G90 ( Absolute coordinates. )
+G00 S24000 ( RPM spindle speed. )
+G64 P0.01016 ( set maximum deviation from commanded toolpath )
+G01 F100.00000 ( Feedrate. )
+
+
+G00 Z5.00000 (Retract to tool change height)
+T1
+G04 P1.00000 (Wait for spindle to stop)
+(MSG, Change tool bit to cutter diameter 3.00000mm)
+M3 ( Spindle on clockwise. )
+G04 P1.00000 (Wait for spindle to get up to speed)
+G04 P0 ( dwell for no time -- G64 should not smooth over this point )
+G00 Z5.00000 ( retract )
+
+G00 X76.49997 Y-88.74999 ( rapid move to begin. )
+G01 Z-1.60000 F50.00000 ( plunge. )
+G04 P0 ( dwell for no time -- G64 should not smooth over this point )
+G01 F100.00000
+G01 X76.49997 Y-77.49999
+G00 Z5.00000
+G01 X76.49997 Y-73.99999
+G01 Z-1.60000 F50.00000
+G01 F100.00000
+G01 X76.49997 Y-62.74999
+G01 X76.52880 Y-62.45733
+G01 X76.61417 Y-62.17595
+G01 X76.75278 Y-61.91661
+G01 X76.93932 Y-61.68931
+G01 X77.16662 Y-61.50277
+G01 X77.42596 Y-61.36416
+G01 X77.70734 Y-61.27880
+G01 X78.00000 Y-61.24997
+G01 X227.99998 Y-61.24997
+G01 X228.29261 Y-61.27880
+G01 X228.57399 Y-61.36416
+G01 X228.83332 Y-61.50277
+G01 X229.06063 Y-61.68931
+G01 X229.24717 Y-61.91661
+G01 X229.38577 Y-62.17595
+G01 X229.47114 Y-62.45733
+G01 X229.49997 Y-62.74999
+G01 X229.49997 Y-73.99999
+G00 Z5.00000
+G01 X229.49997 Y-77.49999
+G01 Z-1.60000 F50.00000
+G01 F100.00000
+G01 X229.49997 Y-88.74999
+G01 X229.47114 Y-89.04262
+G01 X229.38577 Y-89.32400
+G01 X229.24717 Y-89.58334
+G01 X229.06063 Y-89.81064
+G01 X228.83332 Y-89.99718
+G01 X228.57399 Y-90.13579
+G01 X228.29261 Y-90.22116
+G01 X227.99998 Y-90.24998
+G01 X78.00000 Y-90.24998
+G01 X77.70734 Y-90.22116
+G01 X77.42596 Y-90.13579
+G01 X77.16662 Y-89.99718
+G01 X76.93932 Y-89.81064
+G01 X76.75278 Y-89.58334
+G01 X76.61417 Y-89.32400
+G01 X76.52880 Y-89.04262
+G01 X76.49997 Y-88.74999
+
+G04 P0 ( dwell for no time -- G64 should not smooth over this point )
+G00 Z5.000000 ( retract )
+
+G04 P1.000000
+M9 ( Coolant off. )
+

models/busel.tail.hub.scad

@@ -0,0 +1,5 @@
+difference() {
+cube([26,100,28], center=true);
+cube([24,110,27], center=true);
+    
+}