busel.hvist/breakboard/gerber/pcb_front.ngc.tap

5284 lines
135 KiB
Plaintext
Raw Permalink Normal View History

2024-08-13 09:31:38 +03:00
( pcb2gcode 2.5.0 )
( Software-independent Gcode )
G94 ( Millimeters per minute feed rate. )
G21 ( Units == Millimeters. )
G90 ( Absolute coordinates. )
G00 S24000 ( RPM spindle speed. )
G64 P0.01016 ( set maximum deviation from commanded toolpath )
G01 F100.00000 ( Feedrate. )
G00 Z5.00000 (Retract to tool change height)
T1
G04 P1.00000 (Wait for spindle to stop)
(MSG, Change tool bit to mill diameter 0.00000mm)
M3 ( Spindle on clockwise. )
G04 P1.00000 (Wait for spindle to get up to speed)
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z5.00000 ( retract )
G00 X79.84998 Y-68.19999 ( rapid move to begin. )
G01 F50.00000
( Mill infeed pass 1/1 )
G01 Z-0.04000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F100.00000
G01 X79.84998 Y-68.19999
G01 X79.87208 Y-67.97563
G01 X79.93753 Y-67.75991
G01 X80.04381 Y-67.56108
G01 X80.18681 Y-67.38681
G01 X80.36108 Y-67.24381
G01 X80.55991 Y-67.13753
G01 X80.77563 Y-67.07208
G01 X80.99999 Y-67.04998
G01 X81.22435 Y-67.07208
G01 X81.44007 Y-67.13753
G01 X81.63890 Y-67.24381
G01 X81.81317 Y-67.38681
G01 X81.95617 Y-67.56108
G01 X82.06245 Y-67.75991
G01 X82.12790 Y-67.97563
G01 X82.14998 Y-68.19999
G01 X82.12790 Y-68.42435
G01 X82.08216 Y-68.57507
G01 X83.53354 Y-70.02643
G01 X83.59572 Y-70.10220
G01 X83.64192 Y-70.18863
G01 X83.67037 Y-70.28243
G01 X83.68000 Y-70.38000
G01 X83.68000 Y-71.99996
G01 X85.30130 Y-71.99996
G01 X86.74997 Y-70.55129
G01 X86.74997 Y-67.74998
G01 X86.75959 Y-67.65242
G01 X86.78804 Y-67.55862
G01 X86.83424 Y-67.47218
G01 X86.89642 Y-67.39641
G01 X86.97219 Y-67.33423
G01 X87.05863 Y-67.28803
G01 X87.15243 Y-67.25958
G01 X87.24999 Y-67.24995
G01 X109.54288 Y-67.24995
G01 X111.14641 Y-65.64643
G01 X111.22218 Y-65.58425
G01 X111.30862 Y-65.53805
G01 X111.40242 Y-65.50960
G01 X111.49998 Y-65.49997
G01 X115.04287 Y-65.49997
G01 X115.39642 Y-65.14643
G01 X115.47218 Y-65.08425
G01 X115.55862 Y-65.03805
G01 X115.65242 Y-65.00960
G01 X115.74998 Y-64.99997
G01 X119.27500 Y-64.99997
G01 X119.27500 Y-64.90000
G01 X119.27980 Y-64.85120
G01 X119.29402 Y-64.80432
G01 X119.31711 Y-64.76108
G01 X119.34820 Y-64.72321
G01 X119.38610 Y-64.69212
G01 X119.42933 Y-64.66901
G01 X119.47622 Y-64.65479
G01 X119.52498 Y-64.64999
G01 X120.97499 Y-64.64999
G01 X121.02376 Y-64.65479
G01 X121.07065 Y-64.66901
G01 X121.11388 Y-64.69212
G01 X121.15175 Y-64.72321
G01 X121.18287 Y-64.76108
G01 X121.20596 Y-64.80432
G01 X121.22018 Y-64.85120
G01 X121.22498 Y-64.90000
G01 X121.22498 Y-64.99997
G01 X126.32624 Y-64.99997
G01 X126.34821 Y-64.97320
G01 X126.38611 Y-64.94211
G01 X126.42931 Y-64.91902
G01 X126.47623 Y-64.90480
G01 X126.52499 Y-64.90000
G01 X127.97498 Y-64.90000
G01 X128.02377 Y-64.90480
G01 X128.07066 Y-64.91902
G01 X128.11389 Y-64.94211
G01 X128.15176 Y-64.97320
G01 X128.17373 Y-64.99997
G01 X130.24998 Y-64.99997
G01 X130.34752 Y-65.00960
G01 X130.44132 Y-65.03805
G01 X130.52776 Y-65.08425
G01 X130.60352 Y-65.14643
G01 X134.24708 Y-68.78996
G01 X134.31604 Y-68.78996
G01 X134.39894 Y-68.68894
G01 X134.52775 Y-68.58323
G01 X134.67471 Y-68.50469
G01 X134.83417 Y-68.45633
G01 X134.99998 Y-68.44000
G01 X135.16582 Y-68.45633
G01 X135.32526 Y-68.50469
G01 X135.47222 Y-68.58323
G01 X135.60102 Y-68.68894
G01 X135.68393 Y-68.78996
G01 X139.31603 Y-68.78996
G01 X139.39896 Y-68.68894
G01 X139.52776 Y-68.58323
G01 X139.67470 Y-68.50469
G01 X139.83416 Y-68.45633
G01 X140.00000 Y-68.44000
G01 X140.16581 Y-68.45633
G01 X140.32527 Y-68.50469
G01 X140.47221 Y-68.58323
G01 X140.60104 Y-68.68894
G01 X140.68395 Y-68.78996
G01 X144.54000 Y-68.78996
G01 X144.61820 Y-68.79613
G01 X144.69450 Y-68.81444
G01 X144.76697 Y-68.84446
G01 X144.83387 Y-68.88546
G01 X144.89354 Y-68.93641
G01 X146.62706 Y-70.66996
G01 X147.06603 Y-70.66996
G01 X147.14896 Y-70.56895
G01 X147.27776 Y-70.46323
G01 X147.42470 Y-70.38470
G01 X147.58416 Y-70.33631
G01 X147.75000 Y-70.31998
G01 X147.91581 Y-70.33631
G01 X148.07527 Y-70.38470
G01 X148.22223 Y-70.46323
G01 X148.35104 Y-70.56895
G01 X148.45673 Y-70.69775
G01 X148.53529 Y-70.84471
G01 X148.58365 Y-71.00415
G01 X148.59998 Y-71.16999
G01 X148.58365 Y-71.33582
G01 X148.53529 Y-71.49526
G01 X148.45673 Y-71.64222
G01 X148.35104 Y-71.77103
G01 X148.22223 Y-71.87674
G01 X148.07527 Y-71.95528
G01 X147.91581 Y-72.00367
G01 X147.75000 Y-72.02000
G01 X147.58416 Y-72.00367
G01 X147.42470 Y-71.95528
G01 X147.27776 Y-71.87674
G01 X147.14896 Y-71.77103
G01 X147.06603 Y-71.66999
G01 X146.41998 Y-71.66999
G01 X146.34174 Y-71.66381
G01 X146.26544 Y-71.64550
G01 X146.19298 Y-71.61548
G01 X146.12607 Y-71.57448
G01 X146.06641 Y-71.52353
G01 X144.33288 Y-69.78998
G01 X140.68397 Y-69.78998
G01 X140.60104 Y-69.89102
G01 X140.47221 Y-69.99674
G01 X140.32527 Y-70.07527
G01 X140.16581 Y-70.12366
G01 X140.00000 Y-70.13999
G01 X139.83416 Y-70.12366
G01 X139.67470 Y-70.07527
G01 X139.52776 Y-69.99674
G01 X139.39896 Y-69.89102
G01 X139.31600 Y-69.78998
G01 X135.68396 Y-69.78998
G01 X135.60102 Y-69.89102
G01 X135.47222 Y-69.99674
G01 X135.32526 Y-70.07527
G01 X135.16582 Y-70.12366
G01 X134.99998 Y-70.13999
G01 X134.83417 Y-70.12366
G01 X134.67471 Y-70.07527
G01 X134.52775 Y-69.99674
G01 X134.39894 Y-69.89102
G01 X134.31601 Y-69.78998
G01 X134.00499 Y-69.78998
G01 X133.59999 Y-70.19498
G01 X133.59999 Y-77.93495
G01 X133.95500 Y-78.28996
G01 X134.26603 Y-78.28996
G01 X134.34896 Y-78.18895
G01 X134.47776 Y-78.08323
G01 X134.62470 Y-78.00470
G01 X134.78416 Y-77.95631
G01 X134.95000 Y-77.93998
G01 X135.11581 Y-77.95631
G01 X135.27527 Y-78.00470
G01 X135.42223 Y-78.08323
G01 X135.55104 Y-78.18895
G01 X135.63394 Y-78.28996
G01 X139.26604 Y-78.28996
G01 X139.34895 Y-78.18895
G01 X139.47775 Y-78.08323
G01 X139.62471 Y-78.00470
G01 X139.78415 Y-77.95631
G01 X139.94999 Y-77.93998
G01 X140.11582 Y-77.95631
G01 X140.27526 Y-78.00470
G01 X140.42222 Y-78.08323
G01 X140.55103 Y-78.18895
G01 X140.65674 Y-78.31775
G01 X140.73528 Y-78.46471
G01 X140.78367 Y-78.62415
G01 X140.80000 Y-78.78999
G01 X140.78367 Y-78.95582
G01 X140.73528 Y-79.11526
G01 X140.65674 Y-79.26222
G01 X140.55103 Y-79.39103
G01 X140.42222 Y-79.49674
G01 X140.27526 Y-79.57528
G01 X140.11582 Y-79.62367
G01 X139.94999 Y-79.64000
G01 X139.78415 Y-79.62367
G01 X139.62471 Y-79.57528
G01 X139.47775 Y-79.49674
G01 X139.34895 Y-79.39103
G01 X139.26602 Y-79.28999
G01 X135.63397 Y-79.28999
G01 X135.55104 Y-79.39103
G01 X135.42223 Y-79.49674
G01 X135.27527 Y-79.57528
G01 X135.11581 Y-79.62367
G01 X134.95000 Y-79.64000
G01 X134.78416 Y-79.62367
G01 X134.62470 Y-79.57528
G01 X134.47776 Y-79.49674
G01 X134.34896 Y-79.39103
G01 X134.26603 Y-79.28999
G01 X133.74792 Y-79.28999
G01 X133.65035 Y-79.28036
G01 X133.55655 Y-79.25191
G01 X133.47012 Y-79.20571
G01 X133.39435 Y-79.14353
G01 X132.74642 Y-78.49560
G01 X132.68424 Y-78.41983
G01 X132.63804 Y-78.33340
G01 X132.60959 Y-78.23959
G01 X132.59996 Y-78.14206
G01 X132.59996 Y-69.98790
G01 X132.60959 Y-69.89034
G01 X132.63804 Y-69.79653
G01 X132.68424 Y-69.71010
G01 X132.74642 Y-69.63433
G01 X133.21182 Y-69.16892
G01 X130.04287 Y-65.99999
G01 X128.22499 Y-65.99999
G01 X128.22499 Y-66.34998
G01 X128.22019 Y-66.39875
G01 X128.20597 Y-66.44566
G01 X128.18285 Y-66.48887
G01 X128.15176 Y-66.52677
G01 X128.11389 Y-66.55786
G01 X128.07066 Y-66.58097
G01 X128.02377 Y-66.59519
G01 X127.97498 Y-66.59999
G01 X126.52499 Y-66.59999
G01 X126.47623 Y-66.59519
G01 X126.42931 Y-66.58097
G01 X126.38611 Y-66.55786
G01 X126.34821 Y-66.52677
G01 X126.31712 Y-66.48887
G01 X126.29401 Y-66.44566
G01 X126.27978 Y-66.39875
G01 X126.27498 Y-66.34998
G01 X126.27498 Y-65.99999
G01 X121.22498 Y-65.99999
G01 X121.22498 Y-66.09999
G01 X121.22018 Y-66.14876
G01 X121.20596 Y-66.19565
G01 X121.18287 Y-66.23888
G01 X121.15175 Y-66.27675
G01 X121.11388 Y-66.30784
G01 X121.07065 Y-66.33096
G01 X121.02376 Y-66.34518
G01 X120.97499 Y-66.34998
G01 X119.52498 Y-66.34998
G01 X119.47622 Y-66.34518
G01 X119.42933 Y-66.33096
G01 X119.38610 Y-66.30784
G01 X119.34820 Y-66.27675
G01 X119.31711 Y-66.23888
G01 X119.29402 Y-66.19565
G01 X119.27980 Y-66.14876
G01 X119.27500 Y-66.09999
G01 X119.27500 Y-65.99999
G01 X115.95707 Y-65.99999
G01 X115.60353 Y-66.35354
G01 X115.52776 Y-66.41572
G01 X115.44132 Y-66.46192
G01 X115.34752 Y-66.49037
G01 X115.24999 Y-66.49999
G01 X111.70707 Y-66.49999
G01 X110.25000 Y-67.95707
G01 X110.25000 Y-80.98815
G01 X110.24037 Y-81.08569
G01 X110.21192 Y-81.17949
G01 X110.16572 Y-81.26593
G01 X110.10354 Y-81.34170
G01 X109.08345 Y-82.36179
G01 X109.00768 Y-82.42397
G01 X108.92125 Y-82.47017
G01 X108.82744 Y-82.49862
G01 X108.72991 Y-82.50824
G01 X86.11558 Y-82.50824
G01 X86.17387 Y-82.61731
G01 X86.23076 Y-82.80489
G01 X86.24999 Y-82.99999
G01 X86.24999 Y-83.49999
G01 X86.23076 Y-83.69508
G01 X86.17387 Y-83.88266
G01 X86.08146 Y-84.05556
G01 X85.95711 Y-84.20710
G01 X85.80557 Y-84.33145
G01 X85.63267 Y-84.42386
G01 X85.44507 Y-84.48078
G01 X85.24999 Y-84.49998
G01 X85.05490 Y-84.48078
G01 X84.86729 Y-84.42386
G01 X84.69442 Y-84.33145
G01 X84.54288 Y-84.20710
G01 X84.41853 Y-84.05556
G01 X84.32612 Y-83.88266
G01 X84.26920 Y-83.69508
G01 X84.25000 Y-83.49999
G01 X84.25000 Y-82.99999
G01 X84.26920 Y-82.80489
G01 X84.32612 Y-82.61731
G01 X84.38881 Y-82.49999
G01 X84.32612 Y-82.38266
G01 X84.26920 Y-82.19509
G01 X84.25000 Y-81.99999
G01 X84.25000 Y-81.49999
G01 X84.26920 Y-81.30489
G01 X84.32612 Y-81.11731
G01 X84.35541 Y-81.06250
G01 X82.82643 Y-79.53352
G01 X82.76425 Y-79.45775
G01 X82.71805 Y-79.37132
G01 X82.68960 Y-79.27751
G01 X82.67997 Y-79.17998
G01 X82.67997 Y-70.58708
G01 X81.37507 Y-69.28216
G01 X81.22435 Y-69.32790
G01 X80.99999 Y-69.34998
G01 X80.77563 Y-69.32790
G01 X80.55991 Y-69.26245
G01 X80.36108 Y-69.15617
G01 X80.18681 Y-69.01317
G01 X80.04381 Y-68.83890
G01 X79.93753 Y-68.64007
G01 X79.87208 Y-68.42435
G01 X79.84998 Y-68.19999
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z5.00000 ( retract )
G00 X79.84998 Y-82.59999 ( rapid move to begin. )
G01 F50.00000
( Mill infeed pass 1/1 )
G01 Z-0.04000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F100.00000
G01 X79.84998 Y-82.59999
G01 X79.87208 Y-82.37563
G01 X79.93753 Y-82.15991
G01 X80.04381 Y-81.96108
G01 X80.18681 Y-81.78681
G01 X80.36108 Y-81.64380
G01 X80.55991 Y-81.53753
G01 X80.77563 Y-81.47207
G01 X80.99999 Y-81.44998
G01 X81.22435 Y-81.47207
G01 X81.44007 Y-81.53753
G01 X81.63890 Y-81.64380
G01 X81.81317 Y-81.78681
G01 X81.95617 Y-81.96108
G01 X82.06245 Y-82.15991
G01 X82.12790 Y-82.37563
G01 X82.14998 Y-82.59999
G01 X82.12790 Y-82.82435
G01 X82.06245 Y-83.04007
G01 X81.95617 Y-83.23890
G01 X81.81317 Y-83.41317
G01 X81.63890 Y-83.55617
G01 X81.49999 Y-83.63044
G01 X81.49999 Y-87.24997
G01 X112.74997 Y-87.24997
G01 X112.74997 Y-84.36115
G01 X112.69442 Y-84.33145
G01 X112.54288 Y-84.20710
G01 X112.41852 Y-84.05556
G01 X112.32612 Y-83.88266
G01 X112.26919 Y-83.69508
G01 X112.24999 Y-83.49999
G01 X112.24999 Y-82.99999
G01 X112.26919 Y-82.80489
G01 X112.32612 Y-82.61731
G01 X112.38880 Y-82.49999
G01 X112.32612 Y-82.38266
G01 X112.26919 Y-82.19509
G01 X112.24999 Y-81.99999
G01 X112.24999 Y-81.49999
G01 X112.26919 Y-81.30489
G01 X112.32612 Y-81.11731
G01 X112.41852 Y-80.94442
G01 X112.54288 Y-80.79288
G01 X112.69442 Y-80.66852
G01 X112.86731 Y-80.57612
G01 X113.05489 Y-80.51919
G01 X113.24999 Y-80.49999
G01 X113.44509 Y-80.51919
G01 X113.63267 Y-80.57612
G01 X113.80556 Y-80.66852
G01 X113.95710 Y-80.79288
G01 X114.08146 Y-80.94442
G01 X114.17386 Y-81.11731
G01 X114.23078 Y-81.30489
G01 X114.24999 Y-81.49999
G01 X114.24999 Y-81.99999
G01 X114.23078 Y-82.19509
G01 X114.17386 Y-82.38266
G01 X114.11115 Y-82.49999
G01 X114.17386 Y-82.61731
G01 X114.23078 Y-82.80489
G01 X114.24999 Y-82.99999
G01 X114.24999 Y-83.49999
G01 X114.23078 Y-83.69508
G01 X114.17386 Y-83.88266
G01 X114.08146 Y-84.05556
G01 X113.95710 Y-84.20710
G01 X113.80556 Y-84.33145
G01 X113.74999 Y-84.36117
G01 X113.74999 Y-87.24997
G01 X118.32623 Y-87.24997
G01 X118.29402 Y-87.19566
G01 X118.27980 Y-87.14877
G01 X118.27500 Y-87.09998
G01 X118.27500 Y-85.89998
G01 X118.27980 Y-85.85121
G01 X118.29402 Y-85.80432
G01 X118.31711 Y-85.76109
G01 X118.34820 Y-85.72322
G01 X118.38610 Y-85.69213
G01 X118.42933 Y-85.66902
G01 X118.47622 Y-85.65479
G01 X118.52499 Y-85.64999
G01 X119.97499 Y-85.64999
G01 X120.02376 Y-85.65479
G01 X120.07065 Y-85.66902
G01 X120.11388 Y-85.69213
G01 X120.15175 Y-85.72322
G01 X120.18284 Y-85.76109
G01 X120.20596 Y-85.80432
G01 X120.22018 Y-85.85121
G01 X120.22498 Y-85.89998
G01 X120.22498 Y-87.09998
G01 X120.22018 Y-87.14877
G01 X120.20596 Y-87.19566
G01 X120.17375 Y-87.24997
G01 X175.02500 Y-87.24997
G01 X175.04133 Y-87.08415
G01 X175.08969 Y-86.92472
G01 X175.16823 Y-86.77775
G01 X175.27394 Y-86.64895
G01 X175.40275 Y-86.54324
G01 X175.54971 Y-86.46470
G01 X175.70915 Y-86.41631
G01 X175.87498 Y-86.39998
G01 X176.12500 Y-86.39998
G01 X176.29081 Y-86.41631
G01 X176.45027 Y-86.46470
G01 X176.59723 Y-86.54324
G01 X176.72604 Y-86.64895
G01 X176.80894 Y-86.74997
G01 X182.44104 Y-86.74997
G01 X182.52394 Y-86.64895
G01 X182.65275 Y-86.54324
G01 X182.79971 Y-86.46470
G01 X182.95917 Y-86.41631
G01 X183.12498 Y-86.39998
G01 X183.37500 Y-86.39998
G01 X183.54081 Y-86.41631
G01 X183.70027 Y-86.46470
G01 X183.84723 Y-86.54324
G01 X183.97604 Y-86.64895
G01 X184.05894 Y-86.74997
G01 X187.99998 Y-86.74997
G01 X187.99998 Y-86.64999
G01 X188.00478 Y-86.60122
G01 X188.01903 Y-86.55431
G01 X188.04212 Y-86.51110
G01 X188.07321 Y-86.47321
G01 X188.11110 Y-86.44212
G01 X188.15431 Y-86.41903
G01 X188.20122 Y-86.40478
G01 X188.24999 Y-86.39998
G01 X189.69998 Y-86.39998
G01 X189.74877 Y-86.40478
G01 X189.79566 Y-86.41903
G01 X189.83889 Y-86.44212
G01 X189.87676 Y-86.47321
G01 X189.90785 Y-86.51110
G01 X189.93096 Y-86.55431
G01 X189.94519 Y-86.60122
G01 X189.94999 Y-86.64999
G01 X189.94999 Y-86.75489
G01 X189.99998 Y-86.74997
G01 X206.04284 Y-86.74997
G01 X208.14637 Y-84.64641
G01 X208.22216 Y-84.58424
G01 X208.30860 Y-84.53803
G01 X208.40240 Y-84.50958
G01 X208.49996 Y-84.49996
G01 X224.49998 Y-84.49996
G01 X224.57819 Y-84.50613
G01 X224.65449 Y-84.52444
G01 X224.72696 Y-84.55447
G01 X224.79386 Y-84.59546
G01 X224.85353 Y-84.64641
G01 X225.45711 Y-85.24999
G01 X227.24999 Y-85.24999
G01 X227.24999 Y-87.74999
G01 X224.75000 Y-87.74999
G01 X224.75000 Y-85.95711
G01 X224.29287 Y-85.49998
G01 X208.70705 Y-85.49998
G01 X206.60350 Y-87.60353
G01 X206.52770 Y-87.66571
G01 X206.44129 Y-87.71192
G01 X206.34749 Y-87.74036
G01 X206.24996 Y-87.74999
G01 X189.99998 Y-87.74999
G01 X189.94999 Y-87.74506
G01 X189.94999 Y-87.84999
G01 X189.94519 Y-87.89876
G01 X189.93096 Y-87.94565
G01 X189.90785 Y-87.98888
G01 X189.87676 Y-88.02677
G01 X189.83889 Y-88.05786
G01 X189.79566 Y-88.08095
G01 X189.74877 Y-88.09518
G01 X189.69998 Y-88.09998
G01 X188.24999 Y-88.09998
G01 X188.20122 Y-88.09518
G01 X188.15431 Y-88.08095
G01 X188.11110 Y-88.05786
G01 X188.07321 Y-88.02677
G01 X188.04212 Y-87.98888
G01 X188.01903 Y-87.94565
G01 X188.00478 Y-87.89876
G01 X187.99998 Y-87.84999
G01 X187.99998 Y-87.74999
G01 X184.05897 Y-87.74999
G01 X183.97604 Y-87.85103
G01 X183.84723 Y-87.95675
G01 X183.70027 Y-88.03528
G01 X183.54081 Y-88.08364
G01 X183.37500 Y-88.09998
G01 X183.12498 Y-88.09998
G01 X182.95917 Y-88.08364
G01 X182.79971 Y-88.03528
G01 X182.65275 Y-87.95675
G01 X182.52394 Y-87.85103
G01 X182.44101 Y-87.74999
G01 X176.80897 Y-87.74999
G01 X176.72604 Y-87.85103
G01 X176.59723 Y-87.95675
G01 X176.45027 Y-88.03528
G01 X176.29081 Y-88.08364
G01 X176.12500 Y-88.09998
G01 X175.85868 Y-88.09838
G01 X175.77775 Y-88.16571
G01 X175.69132 Y-88.21191
G01 X175.59752 Y-88.24036
G01 X175.49998 Y-88.24999
G01 X81.24998 Y-88.24999
G01 X81.17175 Y-88.24382
G01 X81.09544 Y-88.22550
G01 X81.02295 Y-88.19548
G01 X80.95605 Y-88.15448
G01 X80.89638 Y-88.10351
G01 X80.64640 Y-87.85349
G01 X80.58424 Y-87.77773
G01 X80.53804 Y-87.69129
G01 X80.50959 Y-87.59751
G01 X80.49997 Y-87.49998
G01 X80.49997 Y-83.63041
G01 X80.36108 Y-83.55617
G01 X80.18681 Y-83.41317
G01 X80.04381 Y-83.23890
G01 X79.93753 Y-83.04007
G01 X79.87208 Y-82.82435
G01 X79.84998 Y-82.59999
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z5.00000 ( retract )
G00 X78.50048 Y-88.00048 ( rapid move to begin. )
G01 F50.00000
( Mill infeed pass 1/1 )
G01 Z-0.04000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F100.00000
G01 X78.50048 Y-88.00048
G01 X78.51945 Y-88.09579
G01 X78.57343 Y-88.17656
G01 X78.65420 Y-88.23053
G01 X78.74950 Y-88.24948
G01 X79.85486 Y-88.24948
G01 X79.95013 Y-88.23053
G01 X80.03093 Y-88.17656
G01 X80.08490 Y-88.09579
G01 X80.10385 Y-88.00048
G01 X80.08490 Y-87.90521
G01 X80.03794 Y-87.79182
G01 X79.99948 Y-87.59853
G01 X79.99872 Y-84.01129
G01 X79.97236 Y-83.91779
G01 X79.91221 Y-83.84149
G01 X79.82930 Y-83.77067
G01 X79.66057 Y-83.57314
G01 X79.52483 Y-83.35162
G01 X79.42542 Y-83.11159
G01 X79.36476 Y-82.85899
G01 X79.34439 Y-82.59999
G01 X79.36476 Y-82.34098
G01 X79.42542 Y-82.08838
G01 X79.52483 Y-81.84835
G01 X79.66057 Y-81.62684
G01 X79.82930 Y-81.42930
G01 X80.02684 Y-81.26057
G01 X80.24835 Y-81.12483
G01 X80.48838 Y-81.02542
G01 X80.74099 Y-80.96476
G01 X80.99999 Y-80.94439
G01 X81.25897 Y-80.96476
G01 X81.51160 Y-81.02542
G01 X81.75163 Y-81.12483
G01 X81.97312 Y-81.26057
G01 X82.17068 Y-81.42930
G01 X82.33941 Y-81.62684
G01 X82.47515 Y-81.84835
G01 X82.57456 Y-82.08838
G01 X82.63522 Y-82.34098
G01 X82.65559 Y-82.59999
G01 X82.63522 Y-82.85899
G01 X82.57456 Y-83.11159
G01 X82.47515 Y-83.35162
G01 X82.33941 Y-83.57314
G01 X82.17068 Y-83.77067
G01 X82.07342 Y-83.85475
G01 X82.01944 Y-83.93554
G01 X82.00050 Y-84.03082
G01 X82.00050 Y-86.50049
G01 X82.01944 Y-86.59576
G01 X82.07342 Y-86.67656
G01 X82.15419 Y-86.73054
G01 X82.24949 Y-86.74948
G01 X112.00049 Y-86.74948
G01 X112.09579 Y-86.73054
G01 X112.17656 Y-86.67656
G01 X112.23053 Y-86.59576
G01 X112.24948 Y-86.50049
G01 X112.24948 Y-84.72465
G01 X112.23053 Y-84.62937
G01 X112.17656 Y-84.54860
G01 X112.10547 Y-84.47748
G01 X111.96665 Y-84.28642
G01 X111.85942 Y-84.07598
G01 X111.78644 Y-83.85134
G01 X111.74948 Y-83.61807
G01 X111.74948 Y-82.88190
G01 X111.78644 Y-82.64863
G01 X111.80973 Y-82.57692
G01 X111.82114 Y-82.51952
G01 X111.80973 Y-82.42305
G01 X111.78644 Y-82.35135
G01 X111.74948 Y-82.11807
G01 X111.74948 Y-81.38190
G01 X111.78644 Y-81.14863
G01 X111.85942 Y-80.92399
G01 X111.96665 Y-80.71355
G01 X112.10547 Y-80.52247
G01 X112.27247 Y-80.35547
G01 X112.46355 Y-80.21665
G01 X112.67399 Y-80.10942
G01 X112.89863 Y-80.03644
G01 X113.13188 Y-79.99948
G01 X113.36807 Y-79.99948
G01 X113.60135 Y-80.03644
G01 X113.70107 Y-80.06883
G01 X113.82599 Y-80.10942
G01 X114.03642 Y-80.21665
G01 X114.22748 Y-80.35547
G01 X114.39451 Y-80.52247
G01 X114.53332 Y-80.71355
G01 X114.64056 Y-80.92399
G01 X114.71354 Y-81.14863
G01 X114.75049 Y-81.38190
G01 X114.75049 Y-82.11807
G01 X114.71354 Y-82.35135
G01 X114.69025 Y-82.42305
G01 X114.67882 Y-82.48045
G01 X114.69025 Y-82.57692
G01 X114.71354 Y-82.64863
G01 X114.75049 Y-82.88190
G01 X114.75049 Y-83.61807
G01 X114.71354 Y-83.85134
G01 X114.64056 Y-84.07598
G01 X114.53332 Y-84.28642
G01 X114.39451 Y-84.47750
G01 X114.32342 Y-84.54860
G01 X114.26944 Y-84.62937
G01 X114.25050 Y-84.72465
G01 X114.25050 Y-86.50049
G01 X114.26944 Y-86.59576
G01 X114.32342 Y-86.67656
G01 X114.40419 Y-86.73054
G01 X114.49949 Y-86.74948
G01 X117.52550 Y-86.74948
G01 X117.62077 Y-86.73054
G01 X117.70157 Y-86.67656
G01 X117.75554 Y-86.59576
G01 X117.77449 Y-86.50049
G01 X117.77449 Y-85.84997
G01 X117.78498 Y-85.74720
G01 X117.84018 Y-85.58065
G01 X117.93228 Y-85.43133
G01 X118.05633 Y-85.30727
G01 X118.20566 Y-85.21517
G01 X118.37218 Y-85.15998
G01 X118.47497 Y-85.14949
G01 X120.02498 Y-85.14949
G01 X120.12778 Y-85.15998
G01 X120.29432 Y-85.21517
G01 X120.44365 Y-85.30727
G01 X120.56770 Y-85.43133
G01 X120.65980 Y-85.58065
G01 X120.71500 Y-85.74720
G01 X120.72549 Y-85.84999
G01 X120.72549 Y-86.50049
G01 X120.74444 Y-86.59576
G01 X120.79841 Y-86.67656
G01 X120.87921 Y-86.73054
G01 X120.97449 Y-86.74948
G01 X166.23627 Y-86.74948
G01 X166.33157 Y-86.73054
G01 X166.41234 Y-86.67656
G01 X166.46632 Y-86.59576
G01 X166.48527 Y-86.50049
G01 X166.46632 Y-86.40521
G01 X166.41234 Y-86.32441
G01 X162.15037 Y-82.06245
G01 X162.06277 Y-81.93133
G01 X162.00242 Y-81.78566
G01 X161.97166 Y-81.63103
G01 X161.97072 Y-79.80746
G01 X161.94349 Y-79.71422
G01 X161.88266 Y-79.63845
G01 X161.79747 Y-79.59176
G01 X161.70090 Y-79.58122
G01 X161.60763 Y-79.60843
G01 X161.54844 Y-79.65597
G01 X161.54616 Y-79.65369
G01 X161.37138 Y-79.82849
G01 X161.17781 Y-79.96403
G01 X160.96366 Y-80.06390
G01 X160.73539 Y-80.12506
G01 X160.49998 Y-80.14564
G01 X160.26458 Y-80.12506
G01 X160.03633 Y-80.06390
G01 X159.82216 Y-79.96403
G01 X159.62859 Y-79.82849
G01 X159.46150 Y-79.66138
G01 X159.32594 Y-79.46781
G01 X159.22607 Y-79.25364
G01 X159.16493 Y-79.02539
G01 X159.14433 Y-78.78999
G01 X159.16493 Y-78.55458
G01 X159.22607 Y-78.32631
G01 X159.32594 Y-78.11216
G01 X159.46148 Y-77.91859
G01 X159.62859 Y-77.75148
G01 X159.66791 Y-77.72395
G01 X159.72907 Y-77.66281
G01 X159.76818 Y-77.57389
G01 X159.77032 Y-77.47676
G01 X159.73509 Y-77.38621
G01 X159.66791 Y-77.31603
G01 X159.62859 Y-77.28849
G01 X159.46150 Y-77.12138
G01 X159.32594 Y-76.92781
G01 X159.22607 Y-76.71364
G01 X159.16493 Y-76.48539
G01 X159.14433 Y-76.24999
G01 X159.16493 Y-76.01458
G01 X159.22607 Y-75.78634
G01 X159.24520 Y-75.74478
G01 X159.26415 Y-75.64948
G01 X159.24520 Y-75.55420
G01 X159.19122 Y-75.47341
G01 X159.11045 Y-75.41943
G01 X159.01515 Y-75.40048
G01 X157.58470 Y-75.40048
G01 X157.48942 Y-75.41943
G01 X157.40863 Y-75.47341
G01 X156.90507 Y-75.97831
G01 X156.85836 Y-76.06347
G01 X156.84777 Y-76.16007
G01 X156.85564 Y-76.24999
G01 X156.83504 Y-76.48539
G01 X156.77388 Y-76.71364
G01 X156.67403 Y-76.92781
G01 X156.53847 Y-77.12138
G01 X156.37139 Y-77.28849
G01 X156.33207 Y-77.31603
G01 X156.27091 Y-77.37716
G01 X156.23179 Y-77.46609
G01 X156.22966 Y-77.56322
G01 X156.26489 Y-77.65377
G01 X156.33207 Y-77.72395
G01 X156.37139 Y-77.75148
G01 X156.53847 Y-77.91859
G01 X156.67403 Y-78.11216
G01 X156.77388 Y-78.32634
G01 X156.83504 Y-78.55458
G01 X156.85564 Y-78.78999
G01 X156.83504 Y-79.02539
G01 X156.77388 Y-79.25364
G01 X156.67403 Y-79.46781
G01 X156.53847 Y-79.66138
G01 X156.37139 Y-79.82849
G01 X156.17782 Y-79.96403
G01 X155.96365 Y-80.06390
G01 X155.73540 Y-80.12506
G01 X155.49999 Y-80.14564
G01 X155.26459 Y-80.12506
G01 X155.03632 Y-80.06390
G01 X154.82217 Y-79.96403
G01 X154.62860 Y-79.82849
G01 X154.46149 Y-79.66138
G01 X154.32595 Y-79.46781
G01 X154.22608 Y-79.25364
G01 X154.20094 Y-79.16802
G01 X154.14696 Y-79.08724
G01 X154.06616 Y-79.03327
G01 X153.97089 Y-79.01429
G01 X153.87559 Y-79.03327
G01 X153.79482 Y-79.08724
G01 X152.72342 Y-80.15864
G01 X152.66944 Y-80.23941
G01 X152.65049 Y-80.33471
G01 X152.65049 Y-84.78446
G01 X152.61974 Y-84.93912
G01 X152.55938 Y-85.08479
G01 X152.47178 Y-85.21591
G01 X151.71590 Y-85.97179
G01 X151.58481 Y-86.05939
G01 X151.43912 Y-86.11972
G01 X151.28687 Y-86.14997
G01 X123.01870 Y-86.14997
G01 X122.86648 Y-86.11972
G01 X122.72081 Y-86.05939
G01 X122.58970 Y-85.97179
G01 X119.54134 Y-82.92341
G01 X119.46057 Y-82.86943
G01 X119.36527 Y-82.85048
G01 X119.01868 Y-82.85048
G01 X118.80875 Y-82.81723
G01 X118.60657 Y-82.75155
G01 X118.41716 Y-82.65503
G01 X118.24520 Y-82.53009
G01 X118.09489 Y-82.37977
G01 X117.96994 Y-82.20781
G01 X117.87342 Y-82.01840
G01 X117.80774 Y-81.81622
G01 X117.77449 Y-81.60629
G01 X117.77449 Y-81.39369
G01 X117.79014 Y-81.27535
G01 X117.77116 Y-81.18005
G01 X117.71719 Y-81.09928
G01 X115.75318 Y-79.13527
G01 X115.66558 Y-79.00416
G01 X115.60526 Y-78.85849
G01 X115.57450 Y-78.70383
G01 X115.57450 Y-74.29614
G01 X115.60526 Y-74.14148
G01 X115.66558 Y-73.99581
G01 X115.75318 Y-73.86470
G01 X118.71719 Y-70.90070
G01 X118.74256 Y-70.87098
G01 X118.78325 Y-70.78276
G01 X118.78706 Y-70.68569
G01 X118.77449 Y-70.60626
G01 X118.77449 Y-70.39369
G01 X118.80774 Y-70.18376
G01 X118.87342 Y-69.98157
G01 X118.96994 Y-69.79216
G01 X119.09488 Y-69.62018
G01 X119.24520 Y-69.46989
G01 X119.41716 Y-69.34495
G01 X119.60657 Y-69.24843
G01 X119.80875 Y-69.18274
G01 X120.01868 Y-69.14949
G01 X120.48127 Y-69.14949
G01 X120.69122 Y-69.18274
G01 X120.89338 Y-69.24843
G01 X121.08282 Y-69.34495
G01 X121.25477 Y-69.46989
G01 X121.40509 Y-69.62021
G01 X121.53003 Y-69.79216
G01 X121.65858 Y-70.04997
G01 X121.72729 Y-70.11866
G01 X121.81705 Y-70.15584
G01 X121.91421 Y-70.15584
G01 X122.00397 Y-70.11866
G01 X122.12081 Y-70.04060
G01 X122.26648 Y-69.98025
G01 X122.42114 Y-69.94949
G01 X125.91245 Y-69.94949
G01 X126.00775 Y-69.93054
G01 X126.08852 Y-69.87657
G01 X126.24519 Y-69.71988
G01 X126.41717 Y-69.59493
G01 X126.60658 Y-69.49844
G01 X126.80874 Y-69.43273
G01 X127.01869 Y-69.39948
G01 X127.48128 Y-69.39948
G01 X127.69124 Y-69.43273
G01 X127.89339 Y-69.49844
G01 X128.08280 Y-69.59493
G01 X128.25479 Y-69.71988
G01 X128.40510 Y-69.87019
G01 X128.53005 Y-70.04218
G01 X128.62654 Y-70.23158
G01 X128.69222 Y-70.43374
G01 X128.72550 Y-70.64370
G01 X128.72550 Y-70.85627
G01 X128.69222 Y-71.06623
G01 X128.62654 Y-71.26839
G01 X128.53005 Y-71.45779
G01 X128.40510 Y-71.62978
G01 X128.25479 Y-71.78010
G01 X128.22939 Y-71.79854
G01 X128.17429 Y-71.85363
G01 X128.13363 Y-71.94187
G01 X128.12982 Y-72.03895
G01 X128.16345 Y-72.13008
G01 X128.22939 Y-72.20143
G01 X128.25479 Y-72.21987
G01 X128.40510 Y-72.37019
G01 X128.53005 Y-72.54217
G01 X128.62654 Y-72.73158
G01 X128.69222 Y-72.93374
G01 X128.72550 Y-73.14369
G01 X128.72550 Y-73.35629
G01 X128.69222 Y-73.56622
G01 X128.62654 Y-73.76841
G01 X128.53005 Y-73.95781
G01 X128.40510 Y-74.12977
G01 X128.25479 Y-74.28009
G01 X128.08280 Y-74.40503
G01 X127.89339 Y-74.50155
G01 X127.69124 Y-74.56724
G01 X127.48128 Y-74.60049
G01 X127.01869 Y-74.60049
G01 X126.80874 Y-74.56724
G01 X126.60658 Y-74.50155
G01 X126.41717 Y-74.40503
G01 X126.24519 Y-74.28009
G01 X126.08852 Y-74.12342
G01 X126.00775 Y-74.06945
G01 X125.91245 Y-74.05050
G01 X123.05970 Y-74.05050
G01 X122.96442 Y-74.06945
G01 X122.88363 Y-74.12342
G01 X120.79841 Y-76.20864
G01 X120.74444 Y-76.28941
G01 X120.72549 Y-76.38471
G01 X120.72549 Y-76.49027
G01 X120.74444 Y-76.58555
G01 X120.79841 Y-76.66634
G01 X126.40864 Y-82.27657
G01 X126.48941 Y-82.33054
G01 X126.58471 Y-82.34949
G01 X141.70048 Y-82.34949
G01 X141.79578 Y-82.33054
G01 X141.87655 Y-82.27657
G01 X141.93053 Y-82.19577
G01 X141.94947 Y-82.10050
G01 X141.94947 Y-79.48470
G01 X141.93053 Y-79.38943
G01 X141.87655 Y-79.30863
G01 X141.63065 Y-79.06575
G01 X141.54353 Y-79.02278
G01 X141.44658 Y-79.01643
G01 X141.35458 Y-79.04767
G01 X141.28153 Y-79.11173
G01 X141.23858 Y-79.19885
G01 X141.22390 Y-79.25364
G01 X141.12403 Y-79.46781
G01 X140.98849 Y-79.66138
G01 X140.82138 Y-79.82849
G01 X140.62781 Y-79.96403
G01 X140.41364 Y-80.06390
G01 X140.18539 Y-80.12506
G01 X139.94999 Y-80.14564
G01 X139.71458 Y-80.12506
G01 X139.48634 Y-80.06390
G01 X139.27216 Y-79.96403
G01 X139.08862 Y-79.83553
G01 X139.04110 Y-79.80944
G01 X138.94582 Y-79.79049
G01 X135.95416 Y-79.79049
G01 X135.90026 Y-79.79639
G01 X135.81134 Y-79.83553
G01 X135.62782 Y-79.96403
G01 X135.41365 Y-80.06390
G01 X135.18538 Y-80.12506
G01 X134.94997 Y-80.14564
G01 X134.71459 Y-80.12506
G01 X134.48632 Y-80.06390
G01 X134.27215 Y-79.96403
G01 X134.08863 Y-79.83553
G01 X134.04111 Y-79.80944
G01 X133.94581 Y-79.79049
G01 X133.64936 Y-79.79049
G01 X133.45607 Y-79.75204
G01 X133.27400 Y-79.67662
G01 X133.11012 Y-79.56713
G01 X132.32285 Y-78.77985
G01 X132.21335 Y-78.61597
G01 X132.14965 Y-78.46220
G01 X132.13794 Y-78.43390
G01 X132.09948 Y-78.24061
G01 X132.09948 Y-69.88937
G01 X132.13794 Y-69.69608
G01 X132.21335 Y-69.51398
G01 X132.38193 Y-69.26423
G01 X132.40088 Y-69.16895
G01 X132.38193 Y-69.07365
G01 X132.32795 Y-68.99288
G01 X129.90850 Y-66.57343
G01 X129.82771 Y-66.51945
G01 X129.73243 Y-66.50048
G01 X128.89555 Y-66.50048
G01 X128.87747 Y-66.50114
G01 X128.78382 Y-66.52697
G01 X128.70716 Y-66.58666
G01 X128.56769 Y-66.81864
G01 X128.44363 Y-66.94269
G01 X128.29433 Y-67.03479
G01 X128.12779 Y-67.08999
G01 X128.02499 Y-67.10048
G01 X126.47498 Y-67.10048
G01 X126.37219 Y-67.08999
G01 X126.20567 Y-67.03479
G01 X126.05634 Y-66.94269
G01 X125.93229 Y-66.81864
G01 X125.84016 Y-66.66931
G01 X125.83447 Y-66.65420
G01 X125.78050 Y-66.57343
G01 X125.69970 Y-66.51945
G01 X125.60442 Y-66.50048
G01 X121.73900 Y-66.50048
G01 X121.64370 Y-66.51945
G01 X121.56293 Y-66.57343
G01 X121.44365 Y-66.69270
G01 X121.29432 Y-66.78480
G01 X121.12777 Y-66.84000
G01 X121.02501 Y-66.85049
G01 X119.47497 Y-66.85049
G01 X119.37220 Y-66.84000
G01 X119.20565 Y-66.78480
G01 X119.05633 Y-66.69270
G01 X118.93705 Y-66.57343
G01 X118.85628 Y-66.51945
G01 X118.76098 Y-66.50048
G01 X116.26753 Y-66.50048
G01 X116.17226 Y-66.51945
G01 X116.09149 Y-66.57343
G01 X115.88778 Y-66.77713
G01 X115.72390 Y-66.88661
G01 X115.54183 Y-66.96205
G01 X115.34854 Y-67.00048
G01 X112.01756 Y-67.00048
G01 X111.92226 Y-67.01945
G01 X111.84148 Y-67.07342
G01 X110.82343 Y-68.09148
G01 X110.76945 Y-68.17225
G01 X110.75048 Y-68.26755
G01 X110.75048 Y-81.08671
G01 X110.71205 Y-81.28000
G01 X110.63661 Y-81.46207
G01 X110.52713 Y-81.62595
G01 X109.36770 Y-82.78538
G01 X109.20382 Y-82.89486
G01 X109.02175 Y-82.97029
G01 X108.82846 Y-83.00872
G01 X86.99950 Y-83.00872
G01 X86.90420 Y-83.02770
G01 X86.82342 Y-83.08167
G01 X86.76945 Y-83.16244
G01 X86.75050 Y-83.25775
G01 X86.75050 Y-83.61807
G01 X86.71354 Y-83.85134
G01 X86.64054 Y-84.07598
G01 X86.53333 Y-84.28642
G01 X86.39449 Y-84.47750
G01 X86.22749 Y-84.64451
G01 X86.03643 Y-84.78332
G01 X85.82599 Y-84.89056
G01 X85.60135 Y-84.96353
G01 X85.36808 Y-85.00049
G01 X85.13188 Y-85.00049
G01 X84.89861 Y-84.96353
G01 X84.67400 Y-84.89056
G01 X84.46356 Y-84.78332
G01 X84.27248 Y-84.64451
G01 X84.10547 Y-84.47748
G01 X83.96663 Y-84.28642
G01 X83.85942 Y-84.07598
G01 X83.78642 Y-83.85134
G01 X83.74949 Y-83.61807
G01 X83.74949 Y-82.88190
G01 X83.78642 Y-82.64863
G01 X83.80974 Y-82.57692
G01 X83.82114 Y-82.51952
G01 X83.80974 Y-82.42305
G01 X83.78642 Y-82.35135
G01 X83.74949 Y-82.11807
G01 X83.74949 Y-81.38190
G01 X83.76244 Y-81.28051
G01 X83.74350 Y-81.18521
G01 X83.68952 Y-81.10444
G01 X82.40286 Y-79.81777
G01 X82.29336 Y-79.65389
G01 X82.23880 Y-79.52219
G01 X82.21795 Y-79.47182
G01 X82.17949 Y-79.27853
G01 X82.17949 Y-70.89755
G01 X82.16054 Y-70.80225
G01 X82.10657 Y-70.72147
G01 X81.28993 Y-69.90593
G01 X81.20515 Y-69.85846
G01 X81.10868 Y-69.84703
G01 X80.99999 Y-69.85559
G01 X80.74099 Y-69.83522
G01 X80.48838 Y-69.77456
G01 X80.24835 Y-69.67515
G01 X80.02684 Y-69.53941
G01 X79.82930 Y-69.37068
G01 X79.66057 Y-69.17312
G01 X79.52483 Y-68.95163
G01 X79.42542 Y-68.71160
G01 X79.36476 Y-68.45897
G01 X79.34439 Y-68.19999
G01 X79.36476 Y-67.94099
G01 X79.42542 Y-67.68838
G01 X79.52483 Y-67.44835
G01 X79.66057 Y-67.22684
G01 X79.82930 Y-67.02930
G01 X80.02684 Y-66.86057
G01 X80.24835 Y-66.72483
G01 X80.48838 Y-66.62542
G01 X80.74099 Y-66.56476
G01 X80.99999 Y-66.54439
G01 X81.25897 Y-66.56476
G01 X81.51160 Y-66.62542
G01 X81.75163 Y-66.72483
G01 X81.97312 Y-66.86057
G01 X82.17068 Y-67.02930
G01 X82.33941 Y-67.22684
G01 X82.47515 Y-67.44835
G01 X82.57456 Y-67.68838
G01 X82.63522 Y-67.94099
G01 X82.65559 Y-68.19999
G01 X82.64627 Y-68.32821
G01 X82.66521 Y-68.42349
G01 X82.71919 Y-68.50428
G01 X83.95713 Y-69.74220
G01 X84.06661 Y-69.90608
G01 X84.14205 Y-70.08815
G01 X84.18048 Y-70.28144
G01 X84.18048 Y-71.25048
G01 X84.19945 Y-71.34578
G01 X84.25343 Y-71.42655
G01 X84.33420 Y-71.48053
G01 X84.42950 Y-71.49948
G01 X84.99086 Y-71.49948
G01 X85.08614 Y-71.48053
G01 X85.16694 Y-71.42655
G01 X86.17656 Y-70.41693
G01 X86.23054 Y-70.33613
G01 X86.24948 Y-70.24086
G01 X86.24948 Y-67.65145
G01 X86.28794 Y-67.45816
G01 X86.36335 Y-67.27609
G01 X86.47285 Y-67.11221
G01 X86.61220 Y-66.97284
G01 X86.77608 Y-66.86337
G01 X86.95814 Y-66.78793
G01 X87.15144 Y-66.74950
G01 X109.23242 Y-66.74950
G01 X109.32772 Y-66.73052
G01 X109.40849 Y-66.67655
G01 X110.86221 Y-65.22286
G01 X111.02607 Y-65.11336
G01 X111.20816 Y-65.03794
G01 X111.40145 Y-64.99949
G01 X114.73243 Y-64.99949
G01 X114.82771 Y-64.98054
G01 X114.90851 Y-64.92657
G01 X115.11222 Y-64.72286
G01 X115.27607 Y-64.61336
G01 X115.45814 Y-64.53795
G01 X115.65146 Y-64.49949
G01 X118.76098 Y-64.49949
G01 X118.85628 Y-64.48054
G01 X118.93705 Y-64.42657
G01 X119.05633 Y-64.30726
G01 X119.20565 Y-64.21516
G01 X119.37218 Y-64.15999
G01 X119.47497 Y-64.14948
G01 X121.02498 Y-64.14948
G01 X121.12777 Y-64.15999
G01 X121.29432 Y-64.21516
G01 X121.44365 Y-64.30726
G01 X121.56293 Y-64.42657
G01 X121.64370 Y-64.48054
G01 X121.73900 Y-64.49949
G01 X126.07940 Y-64.49949
G01 X126.11908 Y-64.49631
G01 X126.37219 Y-64.40998
G01 X126.47498 Y-64.39949
G01 X128.02499 Y-64.39949
G01 X128.12779 Y-64.40998
G01 X128.29431 Y-64.46517
G01 X128.32527 Y-64.48054
G01 X128.42057 Y-64.49949
G01 X130.34853 Y-64.49949
G01 X130.54183 Y-64.53795
G01 X130.72389 Y-64.61336
G01 X130.88777 Y-64.72286
G01 X134.17072 Y-68.00581
G01 X134.26163 Y-68.06372
G01 X134.35764 Y-68.07848
G01 X134.45200 Y-68.05539
G01 X134.53633 Y-68.01609
G01 X134.76458 Y-67.95493
G01 X134.99998 Y-67.93433
G01 X135.23539 Y-67.95493
G01 X135.46364 Y-68.01609
G01 X135.67781 Y-68.11594
G01 X135.86135 Y-68.24447
G01 X135.90887 Y-68.27053
G01 X136.00417 Y-68.28947
G01 X138.99581 Y-68.28947
G01 X139.04971 Y-68.28358
G01 X139.13863 Y-68.24447
G01 X139.32215 Y-68.11597
G01 X139.53632 Y-68.01609
G01 X139.76459 Y-67.95493
G01 X139.99997 Y-67.93433
G01 X140.23538 Y-67.95493
G01 X140.46365 Y-68.01609
G01 X140.67782 Y-68.11594
G01 X140.86134 Y-68.24447
G01 X140.90886 Y-68.27053
G01 X141.00416 Y-68.28947
G01 X144.63852 Y-68.28947
G01 X144.83182 Y-68.32793
G01 X145.01391 Y-68.40334
G01 X145.17776 Y-68.51284
G01 X146.68251 Y-70.01759
G01 X146.72480 Y-70.05152
G01 X146.81535 Y-70.08675
G01 X146.91248 Y-70.08462
G01 X147.00141 Y-70.04550
G01 X147.07215 Y-69.99595
G01 X147.28632 Y-69.89608
G01 X147.51459 Y-69.83491
G01 X147.74997 Y-69.81434
G01 X147.98538 Y-69.83491
G01 X148.21365 Y-69.89608
G01 X148.42782 Y-69.99595
G01 X148.62139 Y-70.13148
G01 X148.78848 Y-70.29859
G01 X148.92401 Y-70.49216
G01 X148.97186 Y-70.59478
G01 X149.02388 Y-70.70634
G01 X149.08505 Y-70.93458
G01 X149.10565 Y-71.16999
G01 X149.08505 Y-71.40539
G01 X149.02388 Y-71.63364
G01 X148.92401 Y-71.84781
G01 X148.78848 Y-72.04139
G01 X148.62139 Y-72.20849
G01 X148.58205 Y-72.23603
G01 X148.52091 Y-72.29716
G01 X148.48180 Y-72.38609
G01 X148.47966 Y-72.48322
G01 X148.51487 Y-72.57377
G01 X148.58205 Y-72.64395
G01 X148.62139 Y-72.67148
G01 X148.78848 Y-72.83859
G01 X148.92401 Y-73.03216
G01 X149.02388 Y-73.24634
G01 X149.08505 Y-73.47458
G01 X149.10565 Y-73.70999
G01 X149.08357 Y-73.97318
G01 X149.10252 Y-74.06848
G01 X149.15650 Y-74.14925
G01 X149.23729 Y-74.20323
G01 X149.33257 Y-74.22218
G01 X149.42787 Y-74.20323
G01 X149.50864 Y-74.14925
G01 X154.09489 Y-69.56166
G01 X154.14163 Y-69.47649
G01 X154.15219 Y-69.37992
G01 X154.14432 Y-69.28998
G01 X154.16492 Y-69.05457
G01 X154.22608 Y-68.82633
G01 X154.32595 Y-68.61216
G01 X154.46149 Y-68.41858
G01 X154.62860 Y-68.25150
G01 X154.82214 Y-68.11594
G01 X155.03632 Y-68.01609
G01 X155.26459 Y-67.95493
G01 X155.49999 Y-67.93433
G01 X155.73540 Y-67.95493
G01 X155.96365 Y-68.01609
G01 X156.17782 Y-68.11594
G01 X156.37139 Y-68.25150
G01 X156.53647 Y-68.41655
G01 X156.61724 Y-68.47053
G01 X156.71251 Y-68.48950
G01 X158.03883 Y-68.48950
G01 X158.19349 Y-68.52026
G01 X158.33916 Y-68.58058
G01 X158.47027 Y-68.66819
G01 X158.81932 Y-69.01421
G01 X158.90644 Y-69.05719
G01 X159.00339 Y-69.06354
G01 X159.09539 Y-69.03230
G01 X159.16844 Y-68.96824
G01 X159.21139 Y-68.88112
G01 X159.22607 Y-68.82633
G01 X159.32594 Y-68.61216
G01 X159.46148 Y-68.41858
G01 X159.62859 Y-68.25150
G01 X159.82216 Y-68.11594
G01 X160.03633 Y-68.01609
G01 X160.26458 Y-67.95493
G01 X160.49998 Y-67.93433
G01 X160.73539 Y-67.95493
G01 X160.96364 Y-68.01609
G01 X161.17781 Y-68.11594
G01 X161.37138 Y-68.25150
G01 X161.53849 Y-68.41858
G01 X161.67402 Y-68.61216
G01 X161.77390 Y-68.82633
G01 X161.83506 Y-69.05457
G01 X161.85566 Y-69.28998
G01 X161.83506 Y-69.52539
G01 X161.77390 Y-69.75366
G01 X161.67402 Y-69.96781
G01 X161.53849 Y-70.16138
G01 X161.37138 Y-70.32849
G01 X161.33206 Y-70.35602
G01 X161.27092 Y-70.41716
G01 X161.23178 Y-70.50611
G01 X161.22967 Y-70.60324
G01 X161.26488 Y-70.69379
G01 X161.33206 Y-70.76394
G01 X161.37138 Y-70.79150
G01 X161.54057 Y-70.96107
G01 X161.59297 Y-71.00806
G01 X161.68273 Y-71.04525
G01 X161.75820 Y-71.06026
G01 X161.90389 Y-71.12058
G01 X162.03498 Y-71.20819
G01 X167.16505 Y-76.33825
G01 X167.25265 Y-76.46937
G01 X167.31300 Y-76.61504
G01 X167.34376 Y-76.76970
G01 X167.34376 Y-80.02199
G01 X167.36271 Y-80.11729
G01 X167.41668 Y-80.19806
G01 X168.10025 Y-80.88163
G01 X168.17109 Y-80.93121
G01 X168.26545 Y-80.95432
G01 X168.36149 Y-80.93954
G01 X168.44455 Y-80.88912
G01 X168.50197 Y-80.81079
G01 X168.57594 Y-80.65216
G01 X168.71150 Y-80.45859
G01 X168.77165 Y-80.39842
G01 X168.80751 Y-80.35308
G01 X168.84139 Y-80.26202
G01 X168.83786 Y-80.16494
G01 X168.79745 Y-80.07660
G01 X168.72628 Y-80.01043
G01 X168.68132 Y-79.98270
G01 X168.55727 Y-79.85864
G01 X168.46517 Y-79.70931
G01 X168.41000 Y-79.54279
G01 X168.39949 Y-79.44000
G01 X168.39949 Y-78.13998
G01 X168.41000 Y-78.03718
G01 X168.46517 Y-77.87066
G01 X168.55727 Y-77.72133
G01 X168.68132 Y-77.59728
G01 X168.72631 Y-77.56954
G01 X168.77165 Y-77.53368
G01 X168.82562 Y-77.45291
G01 X168.84457 Y-77.35760
G01 X168.82562 Y-77.26233
G01 X168.77165 Y-77.18156
G01 X168.71150 Y-77.12138
G01 X168.57596 Y-76.92781
G01 X168.47609 Y-76.71364
G01 X168.41493 Y-76.48539
G01 X168.39433 Y-76.24999
G01 X168.41493 Y-76.01458
G01 X168.47609 Y-75.78631
G01 X168.57594 Y-75.57216
G01 X168.71150 Y-75.37859
G01 X168.87858 Y-75.21148
G01 X168.91792 Y-75.18395
G01 X168.97906 Y-75.12281
G01 X169.01818 Y-75.03389
G01 X169.02031 Y-74.93676
G01 X168.98508 Y-74.84621
G01 X168.91792 Y-74.77603
G01 X168.87858 Y-74.74849
G01 X168.71150 Y-74.58138
G01 X168.57596 Y-74.38781
G01 X168.47609 Y-74.17364
G01 X168.41493 Y-73.94539
G01 X168.39433 Y-73.70999
G01 X168.41493 Y-73.47458
G01 X168.47609 Y-73.24631
G01 X168.57594 Y-73.03216
G01 X168.71150 Y-72.83859
G01 X168.87858 Y-72.67148
G01 X168.91792 Y-72.64395
G01 X168.97906 Y-72.58281
G01 X169.01818 Y-72.49389
G01 X169.02031 Y-72.39676
G01 X168.98508 Y-72.30621
G01 X168.91792 Y-72.23603
G01 X168.87858 Y-72.20849
G01 X168.71150 Y-72.04139
G01 X168.57596 Y-71.84781
G01 X168.47609 Y-71.63364
G01 X168.41493 Y-71.40539
G01 X168.39433 Y-71.16999
G01 X168.41493 Y-70.93458
G01 X168.47609 Y-70.70631
G01 X168.57594 Y-70.49216
G01 X168.71150 Y-70.29859
G01 X168.87858 Y-70.13148
G01 X169.07215 Y-69.99595
G01 X169.28633 Y-69.89608
G01 X169.51460 Y-69.83491
G01 X169.70576 Y-69.81820
G01 X169.77934 Y-69.80019
G01 X169.86014 Y-69.74622
G01 X172.63351 Y-66.97284
G01 X172.79737 Y-66.86337
G01 X172.97944 Y-66.78793
G01 X173.17273 Y-66.74950
G01 X174.46173 Y-66.74950
G01 X174.53867 Y-66.73731
G01 X174.62343 Y-66.68983
G01 X174.68357 Y-66.61353
G01 X174.71995 Y-66.54218
G01 X174.84489 Y-66.37020
G01 X174.99520 Y-66.21988
G01 X175.16716 Y-66.09494
G01 X175.35657 Y-65.99842
G01 X175.55875 Y-65.93274
G01 X175.76869 Y-65.89949
G01 X176.23127 Y-65.89949
G01 X176.44123 Y-65.93274
G01 X176.64339 Y-65.99842
G01 X176.83279 Y-66.09494
G01 X177.00478 Y-66.21988
G01 X177.15509 Y-66.37020
G01 X177.28004 Y-66.54218
G01 X177.31641 Y-66.61353
G01 X177.36218 Y-66.67655
G01 X177.44298 Y-66.73052
G01 X177.53825 Y-66.74950
G01 X181.71173 Y-66.74950
G01 X181.78866 Y-66.73731
G01 X181.87342 Y-66.68983
G01 X181.93357 Y-66.61353
G01 X181.96994 Y-66.54218
G01 X182.09489 Y-66.37020
G01 X182.24520 Y-66.21988
G01 X182.41716 Y-66.09494
G01 X182.60657 Y-65.99842
G01 X182.80875 Y-65.93274
G01 X183.01868 Y-65.89949
G01 X183.48127 Y-65.89949
G01 X183.69123 Y-65.93274
G01 X183.89338 Y-65.99842
G01 X184.08279 Y-66.09494
G01 X184.25477 Y-66.21988
G01 X184.40509 Y-66.37020
G01 X184.53003 Y-66.54218
G01 X184.56641 Y-66.61353
G01 X184.61218 Y-66.67655
G01 X184.69298 Y-66.73052
G01 X184.78825 Y-66.74950
G01 X202.18565 Y-66.74950
G01 X202.37894 Y-66.78793
G01 X202.56104 Y-66.86334
G01 X202.72489 Y-66.97284
G01 X205.72712 Y-69.97507
G01 X205.83662 Y-70.13895
G01 X205.91203 Y-70.32102
G01 X205.95049 Y-70.51431
G01 X205.95049 Y-74.50991
G01 X205.91203 Y-74.70320
G01 X205.83662 Y-74.88527
G01 X205.72712 Y-75.04913
G01 X204.91915 Y-75.85713
G01 X204.75524 Y-75.96662
G01 X204.57317 Y-76.04204
G01 X204.37991 Y-76.08049
G01 X204.06698 Y-76.08049
G01 X204.01310 Y-76.08639
G01 X203.92418 Y-76.12553
G01 X203.89489 Y-76.14602
G01 X203.83373 Y-76.20716
G01 X203.79461 Y-76.29609
G01 X203.79251 Y-76.39322
G01 X203.82771 Y-76.48377
G01 X203.89489 Y-76.55395
G01 X203.97168 Y-76.60053
G01 X204.06698 Y-76.61948
G01 X204.37991 Y-76.61948
G01 X204.57317 Y-76.65794
G01 X204.75524 Y-76.73335
G01 X204.91915 Y-76.84285
G01 X205.77713 Y-77.70084
G01 X205.88661 Y-77.86472
G01 X205.96202 Y-78.04678
G01 X206.00048 Y-78.24008
G01 X206.00048 Y-80.95412
G01 X205.96202 Y-81.14741
G01 X205.88661 Y-81.32948
G01 X205.77713 Y-81.49336
G01 X204.24336 Y-83.02714
G01 X204.07948 Y-83.13661
G01 X203.89741 Y-83.21205
G01 X203.70411 Y-83.25048
G01 X190.10142 Y-83.25048
G01 X190.04331 Y-83.25736
G01 X189.95507 Y-83.29803
G01 X189.80780 Y-83.40504
G01 X189.61839 Y-83.50153
G01 X189.41623 Y-83.56724
G01 X189.20628 Y-83.60049
G01 X188.74369 Y-83.60049
G01 X188.53374 Y-83.56724
G01 X188.33158 Y-83.50153
G01 X188.14217 Y-83.40504
G01 X187.99490 Y-83.29803
G01 X187.94382 Y-83.26943
G01 X187.84854 Y-83.25048
G01 X187.45754 Y-83.25048
G01 X187.36226 Y-83.26943
G01 X187.28149 Y-83.32343
G01 X185.07776 Y-85.52713
G01 X184.91390 Y-85.63661
G01 X184.73181 Y-85.71205
G01 X184.53852 Y-85.75048
G01 X184.37644 Y-85.75048
G01 X184.31843 Y-85.75733
G01 X184.22950 Y-85.79846
G01 X184.17421 Y-85.85375
G01 X184.13359 Y-85.94199
G01 X184.12983 Y-86.03907
G01 X184.16351 Y-86.13021
G01 X184.22950 Y-86.20150
G01 X184.28114 Y-86.23054
G01 X184.37644 Y-86.24948
G01 X187.48599 Y-86.24948
G01 X187.58126 Y-86.23054
G01 X187.66206 Y-86.17656
G01 X187.78134 Y-86.05728
G01 X187.93066 Y-85.96518
G01 X188.09719 Y-85.90999
G01 X188.19998 Y-85.89950
G01 X189.74999 Y-85.89950
G01 X189.85278 Y-85.90999
G01 X190.01930 Y-85.96518
G01 X190.16863 Y-86.05728
G01 X190.28794 Y-86.17656
G01 X190.36871 Y-86.23054
G01 X190.46398 Y-86.24948
G01 X205.73243 Y-86.24948
G01 X205.82771 Y-86.23054
G01 X205.90850 Y-86.17656
G01 X207.86220 Y-84.22284
G01 X208.02608 Y-84.11334
G01 X208.20814 Y-84.03793
G01 X208.40144 Y-83.99948
G01 X224.59853 Y-83.99948
G01 X224.79183 Y-84.03793
G01 X224.97390 Y-84.11334
G01 X225.13775 Y-84.22284
G01 X225.59147 Y-84.67656
G01 X225.67227 Y-84.73054
G01 X225.76754 Y-84.74949
G01 X227.25050 Y-84.74949
G01 X227.34577 Y-84.73054
G01 X227.42655 Y-84.67656
G01 X227.48055 Y-84.59577
G01 X227.49949 Y-84.50049
G01 X227.49949 Y-63.49949
G01 X227.48055 Y-63.40419
G01 X227.42655 Y-63.32342
G01 X227.34577 Y-63.26944
G01 X227.25050 Y-63.25050
G01 X78.74950 Y-63.25050
G01 X78.65420 Y-63.26944
G01 X78.57343 Y-63.32342
G01 X78.51945 Y-63.40419
G01 X78.50048 Y-63.49949
G01 X78.50048 Y-88.00048
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z5.00000 ( retract )
G00 X89.82756 Y-72.26689 ( rapid move to begin. )
G01 F50.00000
( Mill infeed pass 1/1 )
G01 Z-0.04000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F100.00000
G01 X89.82756 Y-72.26689
G01 X90.74381 Y-72.26689
G01 X90.28570 Y-70.43438
G01 X89.82756 Y-72.26689
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z5.00000 ( retract )
G00 X89.08593 Y-73.60006 ( rapid move to begin. )
G01 F50.00000
( Mill infeed pass 1/1 )
G01 Z-0.04000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F100.00000
G01 X89.08593 Y-73.60006
G01 X89.08786 Y-73.63920
G01 X89.09741 Y-73.67725
G01 X89.11420 Y-73.71268
G01 X89.13757 Y-73.74415
G01 X89.16662 Y-73.77046
G01 X89.20025 Y-73.79061
G01 X89.23718 Y-73.80379
G01 X89.27597 Y-73.80953
G01 X89.31511 Y-73.80760
G01 X89.35316 Y-73.79805
G01 X89.38859 Y-73.78126
G01 X89.42006 Y-73.75789
G01 X89.44638 Y-73.72883
G01 X89.46652 Y-73.69520
G01 X89.47970 Y-73.65827
G01 X89.72756 Y-72.66691
G01 X90.84381 Y-72.66691
G01 X91.09166 Y-73.65827
G01 X91.10485 Y-73.69520
G01 X91.12499 Y-73.72883
G01 X91.15130 Y-73.75789
G01 X91.18277 Y-73.78126
G01 X91.21821 Y-73.79805
G01 X91.25626 Y-73.80760
G01 X91.29540 Y-73.80953
G01 X91.33418 Y-73.80379
G01 X91.37112 Y-73.79061
G01 X91.40474 Y-73.77046
G01 X91.43380 Y-73.74415
G01 X91.45717 Y-73.71268
G01 X91.47396 Y-73.67725
G01 X91.48351 Y-73.63920
G01 X91.48544 Y-73.60006
G01 X91.47970 Y-73.56127
G01 X90.47970 Y-69.56125
G01 X90.46710 Y-69.52559
G01 X90.44803 Y-69.49293
G01 X90.42311 Y-69.46445
G01 X90.39332 Y-69.44119
G01 X90.35964 Y-69.42394
G01 X90.32334 Y-69.41332
G01 X90.28570 Y-69.40974
G01 X90.24803 Y-69.41332
G01 X90.21173 Y-69.42394
G01 X90.17805 Y-69.44119
G01 X90.14826 Y-69.46445
G01 X90.12334 Y-69.49293
G01 X90.10426 Y-69.52559
G01 X90.09167 Y-69.56125
G01 X89.09167 Y-73.56127
G01 X89.08593 Y-73.60006
G01 X83.68000 Y-78.97287
G01 X85.21095 Y-80.50383
G01 X85.24999 Y-80.49999
G01 X85.44507 Y-80.51919
G01 X85.63267 Y-80.57612
G01 X85.80557 Y-80.66852
G01 X85.95711 Y-80.79288
G01 X86.08146 Y-80.94442
G01 X86.17387 Y-81.11731
G01 X86.23076 Y-81.30489
G01 X86.24999 Y-81.50822
G01 X108.52280 Y-81.50822
G01 X109.24997 Y-80.78104
G01 X109.24997 Y-68.24998
G01 X87.74999 Y-68.24998
G01 X87.74999 Y-70.75841
G01 X87.74036 Y-70.85594
G01 X87.71192 Y-70.94974
G01 X87.66571 Y-71.03618
G01 X87.60353 Y-71.11195
G01 X85.86196 Y-72.85352
G01 X85.78619 Y-72.91570
G01 X85.69975 Y-72.96191
G01 X85.60595 Y-72.99035
G01 X85.50841 Y-72.99998
G01 X83.68000 Y-72.99998
G01 X83.68000 Y-78.97287
G01 X91.58618 Y-78.51155
G01 X91.59278 Y-78.47292
G01 X91.60680 Y-78.43629
G01 X91.62768 Y-78.40312
G01 X91.65463 Y-78.37465
G01 X91.68663 Y-78.35199
G01 X91.72242 Y-78.33601
G01 X92.48437 Y-78.08201
G01 X92.37167 Y-77.25550
G01 X91.99179 Y-77.38212
G01 X91.95356 Y-77.39083
G01 X91.91437 Y-77.39189
G01 X91.87574 Y-77.38529
G01 X91.83911 Y-77.37127
G01 X91.80594 Y-77.35039
G01 X91.77746 Y-77.32344
G01 X91.75481 Y-77.29144
G01 X91.73883 Y-77.25562
G01 X91.73012 Y-77.21740
G01 X91.72905 Y-77.17820
G01 X91.73566 Y-77.13957
G01 X91.74968 Y-77.10294
G01 X91.77056 Y-77.06977
G01 X91.79751 Y-77.04130
G01 X91.82951 Y-77.01864
G01 X91.86532 Y-77.00267
G01 X92.31666 Y-76.85220
G01 X92.15895 Y-75.69561
G01 X92.15747 Y-75.65644
G01 X92.16367 Y-75.61773
G01 X92.17731 Y-75.58098
G01 X92.19786 Y-75.54758
G01 X92.22453 Y-75.51885
G01 X92.25631 Y-75.49586
G01 X92.29194 Y-75.47950
G01 X92.33009 Y-75.47044
G01 X92.36926 Y-75.46896
G01 X92.40797 Y-75.47516
G01 X92.44472 Y-75.48880
G01 X92.47812 Y-75.50935
G01 X92.50685 Y-75.53602
G01 X92.52984 Y-75.56779
G01 X92.54620 Y-75.60343
G01 X92.55526 Y-75.64158
G01 X92.70281 Y-76.72349
G01 X93.00817 Y-76.62172
G01 X93.04640 Y-76.61300
G01 X93.08559 Y-76.61194
G01 X93.12422 Y-76.61854
G01 X93.16085 Y-76.63256
G01 X93.19402 Y-76.65344
G01 X93.22250 Y-76.68039
G01 X93.24515 Y-76.71239
G01 X93.26113 Y-76.74821
G01 X93.26984 Y-76.78644
G01 X93.27091 Y-76.82563
G01 X93.26430 Y-76.86426
G01 X93.25028 Y-76.90089
G01 X93.22940 Y-76.93406
G01 X93.20246 Y-76.96253
G01 X93.17045 Y-76.98519
G01 X93.13464 Y-77.00117
G01 X92.75780 Y-77.12680
G01 X92.87053 Y-77.95329
G01 X93.43672 Y-77.76456
G01 X93.47497 Y-77.75585
G01 X93.51416 Y-77.75478
G01 X93.55280 Y-77.76139
G01 X93.58942 Y-77.77541
G01 X93.62260 Y-77.79629
G01 X93.65107 Y-77.82324
G01 X93.67373 Y-77.85524
G01 X93.68970 Y-77.89103
G01 X93.69842 Y-77.92928
G01 X93.69948 Y-77.96847
G01 X93.69288 Y-78.00711
G01 X93.67886 Y-78.04374
G01 X93.65798 Y-78.07691
G01 X93.63103 Y-78.10538
G01 X93.59903 Y-78.12804
G01 X93.56324 Y-78.14401
G01 X92.92552 Y-78.35661
G01 X93.12671 Y-79.83205
G01 X93.12819 Y-79.87121
G01 X93.12199 Y-79.90992
G01 X93.10835 Y-79.94668
G01 X93.08780 Y-79.98008
G01 X93.06113 Y-80.00881
G01 X93.02935 Y-80.03179
G01 X92.99372 Y-80.04815
G01 X92.95557 Y-80.05722
G01 X92.91640 Y-80.05869
G01 X92.87769 Y-80.05249
G01 X92.84094 Y-80.03885
G01 X92.80754 Y-80.01831
G01 X92.77881 Y-79.99164
G01 X92.75582 Y-79.95986
G01 X92.73946 Y-79.92422
G01 X92.73040 Y-79.88607
G01 X92.53936 Y-78.48531
G01 X91.84894 Y-78.71546
G01 X91.81069 Y-78.72418
G01 X91.77150 Y-78.72524
G01 X91.73286 Y-78.71864
G01 X91.69624 Y-78.70462
G01 X91.66306 Y-78.68374
G01 X91.63459 Y-78.65679
G01 X91.61193 Y-78.62479
G01 X91.59596 Y-78.58900
G01 X91.58724 Y-78.55074
G01 X91.58618 Y-78.51155
G01 X92.08567 Y-73.60978
G01 X92.08567 Y-69.60977
G01 X92.08953 Y-69.57073
G01 X92.10091 Y-69.53321
G01 X92.11937 Y-69.49864
G01 X92.14427 Y-69.46834
G01 X92.17457 Y-69.44345
G01 X92.20914 Y-69.42498
G01 X92.24665 Y-69.41360
G01 X92.28569 Y-69.40974
G01 X93.02778 Y-69.41170
G01 X93.08120 Y-69.42699
G01 X93.50977 Y-69.61746
G01 X93.53949 Y-69.63382
G01 X93.56601 Y-69.65493
G01 X93.58856 Y-69.68023
G01 X93.88965 Y-70.08513
G01 X94.04439 Y-70.49191
G01 X94.05371 Y-70.52528
G01 X94.19656 Y-71.28718
G01 X94.19999 Y-71.32406
G01 X94.19999 Y-71.89549
G01 X94.19656 Y-71.93234
G01 X94.05371 Y-72.69424
G01 X94.04439 Y-72.72762
G01 X93.90151 Y-73.10857
G01 X93.87426 Y-73.15832
G01 X93.58856 Y-73.53930
G01 X93.56601 Y-73.56460
G01 X93.53949 Y-73.58571
G01 X93.50977 Y-73.60206
G01 X93.08120 Y-73.79254
G01 X93.02778 Y-73.80783
G01 X92.28569 Y-73.80978
G01 X92.24665 Y-73.80592
G01 X92.20914 Y-73.79454
G01 X92.17457 Y-73.77608
G01 X92.14427 Y-73.75119
G01 X92.11937 Y-73.72088
G01 X92.10091 Y-73.68631
G01 X92.08953 Y-73.64880
G01 X92.08567 Y-73.60978
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z5.00000 ( retract )
G00 X92.48569 Y-73.40976 ( rapid move to begin. )
G01 F50.00000
( Mill infeed pass 1/1 )
G01 Z-0.04000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F100.00000
G01 X92.48569 Y-73.40976
G01 X92.48569 Y-69.80977
G01 X92.95755 Y-69.80977
G01 X93.29976 Y-69.96186
G01 X93.53705 Y-70.27827
G01 X93.66377 Y-70.61609
G01 X93.79996 Y-71.34263
G01 X93.79996 Y-71.87689
G01 X93.66377 Y-72.60344
G01 X93.53705 Y-72.94126
G01 X93.29976 Y-73.25766
G01 X92.95755 Y-73.40976
G01 X92.48569 Y-73.40976
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z5.00000 ( retract )
G00 X95.08569 Y-73.60978 ( rapid move to begin. )
G01 F50.00000
( Mill infeed pass 1/1 )
G01 Z-0.04000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F100.00000
G01 X95.08569 Y-73.60978
G01 X95.08569 Y-69.60977
G01 X95.08955 Y-69.57073
G01 X95.10093 Y-69.53321
G01 X95.11939 Y-69.49864
G01 X95.14429 Y-69.46834
G01 X95.17459 Y-69.44345
G01 X95.20916 Y-69.42498
G01 X95.24667 Y-69.41360
G01 X95.28571 Y-69.40974
G01 X95.32473 Y-69.41360
G01 X95.36224 Y-69.42498
G01 X95.39681 Y-69.44345
G01 X95.42711 Y-69.46834
G01 X95.45201 Y-69.49864
G01 X95.47047 Y-69.53321
G01 X95.48185 Y-69.57073
G01 X95.48571 Y-69.60977
G01 X95.48571 Y-71.31451
G01 X96.79996 Y-71.31451
G01 X96.79996 Y-69.60977
G01 X96.80382 Y-69.57073
G01 X96.81520 Y-69.53321
G01 X96.83366 Y-69.49864
G01 X96.85856 Y-69.46834
G01 X96.88886 Y-69.44345
G01 X96.92343 Y-69.42498
G01 X96.96094 Y-69.41360
G01 X96.99998 Y-69.40974
G01 X97.03900 Y-69.41360
G01 X97.07651 Y-69.42498
G01 X97.11108 Y-69.44345
G01 X97.14139 Y-69.46834
G01 X97.16628 Y-69.49864
G01 X97.18474 Y-69.53321
G01 X97.19612 Y-69.57073
G01 X97.19998 Y-69.60977
G01 X97.19998 Y-73.60978
G01 X97.19612 Y-73.64880
G01 X97.18474 Y-73.68631
G01 X97.16628 Y-73.72088
G01 X97.14139 Y-73.75119
G01 X97.11108 Y-73.77608
G01 X97.07651 Y-73.79454
G01 X97.03900 Y-73.80592
G01 X96.99998 Y-73.80978
G01 X96.96094 Y-73.80592
G01 X96.92343 Y-73.79454
G01 X96.88886 Y-73.77608
G01 X96.85856 Y-73.75119
G01 X96.83366 Y-73.72088
G01 X96.81520 Y-73.68631
G01 X96.80382 Y-73.64880
G01 X96.79996 Y-73.60978
G01 X96.79996 Y-71.71454
G01 X95.48571 Y-71.71454
G01 X95.48571 Y-73.60978
G01 X95.48185 Y-73.64880
G01 X95.47047 Y-73.68631
G01 X95.45201 Y-73.72088
G01 X95.42711 Y-73.75119
G01 X95.39681 Y-73.77608
G01 X95.36224 Y-73.79454
G01 X95.32473 Y-73.80592
G01 X95.28571 Y-73.80978
G01 X95.24667 Y-73.80592
G01 X95.20916 Y-73.79454
G01 X95.17459 Y-73.77608
G01 X95.14429 Y-73.75119
G01 X95.11939 Y-73.72088
G01 X95.10093 Y-73.68631
G01 X95.08955 Y-73.64880
G01 X95.08569 Y-73.60978
G01 X94.44281 Y-77.95430
G01 X94.44667 Y-77.99332
G01 X94.45805 Y-78.03083
G01 X94.47652 Y-78.06540
G01 X94.50141 Y-78.09570
G01 X94.53171 Y-78.12060
G01 X94.56628 Y-78.13906
G01 X94.60380 Y-78.15044
G01 X94.64284 Y-78.15430
G01 X96.92856 Y-78.15430
G01 X96.96757 Y-78.15044
G01 X97.00509 Y-78.13906
G01 X97.03966 Y-78.12060
G01 X97.06996 Y-78.09570
G01 X97.09485 Y-78.06540
G01 X97.11332 Y-78.03083
G01 X97.12470 Y-77.99332
G01 X97.12856 Y-77.95430
G01 X97.12470 Y-77.91526
G01 X97.11332 Y-77.87775
G01 X97.09485 Y-77.84318
G01 X97.06996 Y-77.81287
G01 X97.03966 Y-77.78798
G01 X97.00509 Y-77.76952
G01 X96.96757 Y-77.75814
G01 X96.92856 Y-77.75428
G01 X94.64284 Y-77.75428
G01 X94.60380 Y-77.75814
G01 X94.56628 Y-77.76952
G01 X94.53171 Y-77.78798
G01 X94.50141 Y-77.81287
G01 X94.47652 Y-77.84318
G01 X94.45805 Y-77.87775
G01 X94.44667 Y-77.91526
G01 X94.44281 Y-77.95430
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z5.00000 ( retract )
G00 X102.91948 Y-78.53528 ( rapid move to begin. )
G01 F50.00000
( Mill infeed pass 1/1 )
G01 Z-0.04000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F100.00000
G01 X102.91948 Y-78.53528
G01 X103.98770 Y-78.53528
G01 X103.96045 Y-78.54980
G01 X103.21112 Y-79.04932
G01 X102.97086 Y-78.80901
G01 X102.91948 Y-78.53528
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z5.00000 ( retract )
G00 X101.86927 Y-78.13525 ( rapid move to begin. )
G01 F50.00000
( Mill infeed pass 1/1 )
G01 Z-0.04000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F100.00000
G01 X101.86927 Y-78.13525
G01 X102.44366 Y-78.13525
G01 X102.44709 Y-78.10360
G01 X102.45885 Y-78.06621
G01 X102.47775 Y-78.03185
G01 X102.50292 Y-78.00183
G01 X102.53355 Y-77.97729
G01 X102.55941 Y-77.96383
G01 X102.35712 Y-77.96383
G01 X102.31808 Y-77.95997
G01 X102.28052 Y-77.94859
G01 X102.24597 Y-77.93012
G01 X102.21570 Y-77.90523
G01 X102.19078 Y-77.87493
G01 X102.17234 Y-77.84036
G01 X102.16093 Y-77.80284
G01 X102.15705 Y-77.76383
G01 X102.16093 Y-77.72479
G01 X102.17234 Y-77.68727
G01 X102.19078 Y-77.65270
G01 X102.21570 Y-77.62240
G01 X102.24597 Y-77.59751
G01 X102.28052 Y-77.57904
G01 X102.31808 Y-77.56766
G01 X102.35712 Y-77.56380
G01 X102.44282 Y-77.56380
G01 X102.44282 Y-77.20193
G01 X101.98565 Y-77.20193
G01 X101.98565 Y-77.95430
G01 X101.98176 Y-77.99332
G01 X101.97043 Y-78.03083
G01 X101.95197 Y-78.06540
G01 X101.92705 Y-78.09570
G01 X101.89677 Y-78.12060
G01 X101.86927 Y-78.13525
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z5.00000 ( retract )
G00 X100.58568 Y-78.33528 ( rapid move to begin. )
G01 F50.00000
( Mill infeed pass 1/1 )
G01 Z-0.04000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F100.00000
G01 X100.58568 Y-78.33528
G01 X100.58954 Y-78.29624
G01 X100.60092 Y-78.25872
G01 X100.61938 Y-78.22415
G01 X100.64427 Y-78.19385
G01 X100.67458 Y-78.16896
G01 X100.70915 Y-78.15049
G01 X100.74666 Y-78.13911
G01 X100.78570 Y-78.13525
G01 X101.70201 Y-78.13525
G01 X101.67455 Y-78.12060
G01 X101.64425 Y-78.09570
G01 X101.61935 Y-78.06540
G01 X101.60086 Y-78.03083
G01 X101.58951 Y-77.99332
G01 X101.58565 Y-77.95430
G01 X101.58565 Y-77.20193
G01 X101.27143 Y-77.20193
G01 X101.27143 Y-77.76383
G01 X101.26756 Y-77.80284
G01 X101.25619 Y-77.84036
G01 X101.23772 Y-77.87493
G01 X101.21283 Y-77.90523
G01 X101.18253 Y-77.93012
G01 X101.14796 Y-77.94859
G01 X101.11044 Y-77.95997
G01 X101.07143 Y-77.96383
G01 X101.03239 Y-77.95997
G01 X100.99487 Y-77.94859
G01 X100.96030 Y-77.93012
G01 X100.93000 Y-77.90523
G01 X100.90511 Y-77.87493
G01 X100.88664 Y-77.84036
G01 X100.87526 Y-77.80284
G01 X100.87140 Y-77.76383
G01 X100.87140 Y-77.00193
G01 X100.87526 Y-76.96289
G01 X100.88664 Y-76.92537
G01 X100.90511 Y-76.89080
G01 X100.93000 Y-76.86050
G01 X100.96030 Y-76.83561
G01 X100.99487 Y-76.81714
G01 X101.03239 Y-76.80576
G01 X101.07143 Y-76.80190
G01 X101.58565 Y-76.80190
G01 X101.58565 Y-76.63050
G01 X100.78570 Y-76.63050
G01 X100.74666 Y-76.62664
G01 X100.70915 Y-76.61526
G01 X100.67458 Y-76.59680
G01 X100.64427 Y-76.57191
G01 X100.61938 Y-76.54160
G01 X100.60092 Y-76.50704
G01 X100.58954 Y-76.46952
G01 X100.58568 Y-76.43050
G01 X100.58954 Y-76.39147
G01 X100.60092 Y-76.35395
G01 X100.61938 Y-76.31938
G01 X100.64427 Y-76.28908
G01 X100.67458 Y-76.26419
G01 X100.70915 Y-76.24572
G01 X100.72911 Y-76.23965
G01 X100.73117 Y-76.20767
G01 X100.74128 Y-76.16980
G01 X101.02700 Y-75.40790
G01 X101.04430 Y-75.37270
G01 X101.06812 Y-75.34158
G01 X101.09756 Y-75.31570
G01 X101.13150 Y-75.29604
G01 X101.16861 Y-75.28339
G01 X101.20749 Y-75.27823
G01 X101.24661 Y-75.28075
G01 X101.28448 Y-75.29086
G01 X101.31969 Y-75.30816
G01 X101.35080 Y-75.33198
G01 X101.37668 Y-75.36142
G01 X101.39634 Y-75.39535
G01 X101.40899 Y-75.43246
G01 X101.41415 Y-75.47135
G01 X101.41163 Y-75.51047
G01 X101.40152 Y-75.54834
G01 X101.28857 Y-75.84953
G01 X101.58565 Y-75.84953
G01 X101.58565 Y-75.47813
G01 X101.58951 Y-75.43909
G01 X101.60086 Y-75.40158
G01 X101.61935 Y-75.36701
G01 X101.64425 Y-75.33670
G01 X101.67455 Y-75.31181
G01 X101.70912 Y-75.29335
G01 X101.74661 Y-75.28197
G01 X101.78567 Y-75.27811
G01 X101.82469 Y-75.28197
G01 X101.86218 Y-75.29335
G01 X101.89677 Y-75.31181
G01 X101.92705 Y-75.33670
G01 X101.95197 Y-75.36701
G01 X101.97043 Y-75.40158
G01 X101.98176 Y-75.43909
G01 X101.98565 Y-75.47813
G01 X101.98565 Y-75.84953
G01 X102.64285 Y-75.84953
G01 X102.68186 Y-75.85339
G01 X102.71935 Y-75.86477
G01 X102.75395 Y-75.88324
G01 X102.78425 Y-75.90813
G01 X102.80909 Y-75.93843
G01 X102.82761 Y-75.97300
G01 X102.83896 Y-76.01052
G01 X102.84282 Y-76.04956
G01 X102.83896 Y-76.08857
G01 X102.82761 Y-76.12609
G01 X102.80909 Y-76.16066
G01 X102.78425 Y-76.19096
G01 X102.75395 Y-76.21585
G01 X102.72654 Y-76.23048
G01 X102.92852 Y-76.23048
G01 X102.96754 Y-76.23434
G01 X103.01422 Y-76.25065
G01 X103.01422 Y-75.66861
G01 X103.01811 Y-75.62957
G01 X103.02949 Y-75.59205
G01 X103.04795 Y-75.55748
G01 X103.07282 Y-75.52718
G01 X103.10315 Y-75.50229
G01 X103.13769 Y-75.48382
G01 X103.17523 Y-75.47244
G01 X103.21427 Y-75.46858
G01 X103.25326 Y-75.47244
G01 X103.29080 Y-75.48382
G01 X103.32537 Y-75.50229
G01 X103.35567 Y-75.52718
G01 X103.38057 Y-75.55748
G01 X103.39901 Y-75.59205
G01 X103.41041 Y-75.62957
G01 X103.41427 Y-75.66861
G01 X103.41427 Y-77.38288
G01 X103.41041 Y-77.42189
G01 X103.39901 Y-77.45941
G01 X103.38057 Y-77.49398
G01 X103.35567 Y-77.52428
G01 X103.32537 Y-77.54917
G01 X103.29080 Y-77.56764
G01 X103.25326 Y-77.57902
G01 X103.21427 Y-77.58288
G01 X103.17523 Y-77.57902
G01 X103.13769 Y-77.56764
G01 X103.10315 Y-77.54917
G01 X103.07282 Y-77.52428
G01 X103.04795 Y-77.49398
G01 X103.02949 Y-77.45941
G01 X103.01811 Y-77.42189
G01 X103.01422 Y-77.38288
G01 X103.01422 Y-76.61034
G01 X102.96754 Y-76.62664
G01 X102.92852 Y-76.63050
G01 X101.98565 Y-76.63050
G01 X101.98565 Y-76.80190
G01 X102.64285 Y-76.80190
G01 X102.68186 Y-76.80576
G01 X102.71935 Y-76.81714
G01 X102.75395 Y-76.83561
G01 X102.78425 Y-76.86050
G01 X102.80909 Y-76.89080
G01 X102.82761 Y-76.92537
G01 X102.83896 Y-76.96289
G01 X102.84282 Y-77.00193
G01 X102.84282 Y-77.76383
G01 X102.83896 Y-77.80284
G01 X102.82761 Y-77.84036
G01 X102.80909 Y-77.87493
G01 X102.78425 Y-77.90523
G01 X102.75395 Y-77.93012
G01 X102.71935 Y-77.94859
G01 X102.70056 Y-77.95430
G01 X102.72141 Y-77.96085
G01 X102.75578 Y-77.97973
G01 X102.78580 Y-78.00492
G01 X102.81034 Y-78.03551
G01 X102.82845 Y-78.07030
G01 X102.84452 Y-78.13525
G01 X103.55918 Y-78.13525
G01 X103.53172 Y-78.12060
G01 X103.50142 Y-78.09570
G01 X103.47653 Y-78.06540
G01 X103.45806 Y-78.03083
G01 X103.44668 Y-77.99332
G01 X103.44282 Y-77.95430
G01 X103.44668 Y-77.91526
G01 X103.45806 Y-77.87775
G01 X103.47653 Y-77.84318
G01 X103.50142 Y-77.81287
G01 X103.53172 Y-77.78798
G01 X103.56629 Y-77.76952
G01 X103.60381 Y-77.75814
G01 X103.64285 Y-77.75428
G01 X104.15707 Y-77.75428
G01 X104.15707 Y-75.47813
G01 X104.16096 Y-75.43909
G01 X104.17233 Y-75.40158
G01 X104.19080 Y-75.36701
G01 X104.21567 Y-75.33670
G01 X104.24599 Y-75.31181
G01 X104.28054 Y-75.29335
G01 X104.31808 Y-75.28197
G01 X104.35712 Y-75.27811
G01 X104.39611 Y-75.28197
G01 X104.43365 Y-75.29335
G01 X104.46822 Y-75.31181
G01 X104.49852 Y-75.33670
G01 X104.52341 Y-75.36701
G01 X104.54185 Y-75.40158
G01 X104.55326 Y-75.43909
G01 X104.55712 Y-75.47813
G01 X104.55712 Y-77.95430
G01 X104.55326 Y-77.99332
G01 X104.54185 Y-78.03083
G01 X104.52341 Y-78.06540
G01 X104.49852 Y-78.09570
G01 X104.46822 Y-78.12060
G01 X104.44076 Y-78.13525
G01 X104.53901 Y-78.13911
G01 X104.57652 Y-78.15049
G01 X104.61109 Y-78.16896
G01 X104.64140 Y-78.19385
G01 X104.66629 Y-78.22415
G01 X104.68475 Y-78.25872
G01 X104.69613 Y-78.29624
G01 X104.69999 Y-78.33528
G01 X104.69613 Y-78.37429
G01 X104.68475 Y-78.41181
G01 X104.66629 Y-78.44638
G01 X104.64140 Y-78.47668
G01 X104.61109 Y-78.50157
G01 X104.57652 Y-78.52004
G01 X104.53901 Y-78.53142
G01 X104.49999 Y-78.53528
G01 X104.15511 Y-78.53528
G01 X104.18267 Y-78.55003
G01 X104.21292 Y-78.57495
G01 X104.23779 Y-78.60528
G01 X104.25623 Y-78.63987
G01 X104.26758 Y-78.67739
G01 X104.27134 Y-78.71643
G01 X104.26748 Y-78.75544
G01 X104.25608 Y-78.79293
G01 X104.23756 Y-78.82750
G01 X104.21259 Y-78.85778
G01 X104.18232 Y-78.88262
G01 X103.50655 Y-79.33314
G01 X104.45631 Y-79.87589
G01 X104.48826 Y-79.89857
G01 X104.51521 Y-79.92707
G01 X104.53604 Y-79.96027
G01 X104.55006 Y-79.99692
G01 X104.55661 Y-80.03558
G01 X104.55552 Y-80.07474
G01 X104.54678 Y-80.11297
G01 X104.53070 Y-80.14876
G01 X104.50807 Y-80.18074
G01 X104.47955 Y-80.20766
G01 X104.44637 Y-80.22852
G01 X104.40972 Y-80.24249
G01 X104.37106 Y-80.24904
G01 X104.33187 Y-80.24795
G01 X104.29362 Y-80.23921
G01 X104.25788 Y-80.22318
G01 X103.23566 Y-79.63705
G01 X102.62471 Y-79.02539
G01 X102.60879 Y-78.99999
G01 X102.58910 Y-78.94356
G01 X102.54204 Y-78.69245
G01 X102.12847 Y-79.06001
G01 X102.12847 Y-79.65674
G01 X102.88138 Y-79.47421
G01 X102.92022 Y-79.46875
G01 X102.95936 Y-79.47099
G01 X102.99728 Y-79.48079
G01 X103.03264 Y-79.49783
G01 X103.06393 Y-79.52143
G01 X103.09004 Y-79.55067
G01 X103.10993 Y-79.58445
G01 X103.12286 Y-79.62146
G01 X103.12834 Y-79.66029
G01 X103.12608 Y-79.69943
G01 X103.11630 Y-79.73738
G01 X103.09926 Y-79.77271
G01 X103.07566 Y-79.80403
G01 X103.04643 Y-79.83012
G01 X103.01262 Y-79.85003
G01 X102.97564 Y-79.86296
G01 X101.40424 Y-80.24391
G01 X101.36541 Y-80.24937
G01 X101.32626 Y-80.24713
G01 X101.28832 Y-80.23733
G01 X101.25299 Y-80.22029
G01 X101.22167 Y-80.19669
G01 X101.19558 Y-80.16745
G01 X101.17567 Y-80.13367
G01 X101.16274 Y-80.09666
G01 X101.15728 Y-80.05783
G01 X101.15951 Y-80.01869
G01 X101.16932 Y-79.98074
G01 X101.18636 Y-79.94541
G01 X101.20996 Y-79.91409
G01 X101.23919 Y-79.88800
G01 X101.27297 Y-79.86809
G01 X101.30998 Y-79.85516
G01 X101.72850 Y-79.75371
G01 X101.72850 Y-79.31165
G01 X100.82312 Y-79.48409
G01 X100.78408 Y-79.48762
G01 X100.74509 Y-79.48346
G01 X100.70765 Y-79.47177
G01 X100.67323 Y-79.45303
G01 X100.64313 Y-79.42791
G01 X100.61849 Y-79.39740
G01 X100.60031 Y-79.36268
G01 X100.58923 Y-79.32506
G01 X100.58570 Y-79.28602
G01 X100.58987 Y-79.24703
G01 X100.60155 Y-79.20960
G01 X100.62030 Y-79.17518
G01 X100.64542 Y-79.14508
G01 X100.67592 Y-79.12044
G01 X100.71064 Y-79.10225
G01 X100.74826 Y-79.09118
G01 X101.69401 Y-78.91102
G01 X101.73134 Y-78.87785
G01 X101.74371 Y-78.83014
G01 X101.76220 Y-78.79558
G01 X101.78710 Y-78.76527
G01 X101.81740 Y-78.74038
G01 X101.85197 Y-78.72192
G01 X101.88946 Y-78.71054
G01 X101.92334 Y-78.70721
G01 X102.11679 Y-78.53528
G01 X100.78570 Y-78.53528
G01 X100.74666 Y-78.53142
G01 X100.70915 Y-78.52004
G01 X100.67458 Y-78.50157
G01 X100.64427 Y-78.47668
G01 X100.61938 Y-78.44638
G01 X100.60092 Y-78.41181
G01 X100.58954 Y-78.37429
G01 X100.58568 Y-78.33528
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z5.00000 ( retract )
G00 X97.87138 Y-76.43050 ( rapid move to begin. )
G01 F50.00000
( Mill infeed pass 1/1 )
G01 Z-0.04000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F100.00000
G01 X97.87138 Y-76.43050
G01 X97.87524 Y-76.39147
G01 X97.88662 Y-76.35395
G01 X97.90509 Y-76.31938
G01 X97.92998 Y-76.28908
G01 X97.96028 Y-76.26419
G01 X97.99485 Y-76.24572
G01 X98.03237 Y-76.23434
G01 X98.07141 Y-76.23048
G01 X99.64285 Y-76.23048
G01 X99.68187 Y-76.23434
G01 X99.71938 Y-76.24572
G01 X99.75395 Y-76.26419
G01 X99.78426 Y-76.28908
G01 X99.80915 Y-76.31938
G01 X99.82761 Y-76.35395
G01 X99.83899 Y-76.39147
G01 X99.84285 Y-76.43050
G01 X99.84285 Y-77.38288
G01 X99.69774 Y-78.36494
G01 X99.67885 Y-78.42471
G01 X99.39315 Y-78.99613
G01 X99.37300 Y-79.02834
G01 X99.34715 Y-79.05618
G01 X98.89663 Y-79.45404
G01 X98.32520 Y-79.83499
G01 X98.29061 Y-79.85343
G01 X98.25309 Y-79.86479
G01 X98.21405 Y-79.86860
G01 X98.17504 Y-79.86471
G01 X98.13755 Y-79.85328
G01 X98.10298 Y-79.83477
G01 X98.07270 Y-79.80985
G01 X98.04786 Y-79.77952
G01 X98.02942 Y-79.74493
G01 X98.01807 Y-79.70741
G01 X98.01426 Y-79.66837
G01 X98.01814 Y-79.62936
G01 X98.02957 Y-79.59187
G01 X98.04809 Y-79.55730
G01 X98.07301 Y-79.52702
G01 X98.10333 Y-79.50218
G01 X98.66320 Y-79.12892
G01 X99.05261 Y-78.78280
G01 X99.30689 Y-78.27421
G01 X99.44283 Y-77.36794
G01 X99.44283 Y-76.63050
G01 X98.07141 Y-76.63050
G01 X98.03237 Y-76.62664
G01 X97.99485 Y-76.61526
G01 X97.96028 Y-76.59680
G01 X97.92998 Y-76.57191
G01 X97.90509 Y-76.54160
G01 X97.88662 Y-76.50704
G01 X97.87524 Y-76.46952
G01 X97.87138 Y-76.43050
G01 X98.22853 Y-73.60978
G01 X98.23239 Y-73.64880
G01 X98.24377 Y-73.68631
G01 X98.26224 Y-73.72088
G01 X98.28713 Y-73.75119
G01 X98.31743 Y-73.77608
G01 X98.35200 Y-73.79454
G01 X98.38952 Y-73.80592
G01 X98.42856 Y-73.80978
G01 X99.17064 Y-73.80783
G01 X99.22408 Y-73.79254
G01 X99.65263 Y-73.60206
G01 X99.68233 Y-73.58571
G01 X99.70882 Y-73.56460
G01 X99.73140 Y-73.53930
G01 X100.01712 Y-73.15832
G01 X100.04438 Y-73.10854
G01 X100.18723 Y-72.72759
G01 X100.19655 Y-72.69424
G01 X100.33942 Y-71.93234
G01 X100.34285 Y-71.89549
G01 X100.34285 Y-71.32406
G01 X100.33942 Y-71.28718
G01 X100.19655 Y-70.52528
G01 X100.18723 Y-70.49193
G01 X100.03252 Y-70.08513
G01 X99.73140 Y-69.68023
G01 X99.70882 Y-69.65493
G01 X99.68233 Y-69.63382
G01 X99.65263 Y-69.61746
G01 X99.22408 Y-69.42699
G01 X99.17064 Y-69.41170
G01 X98.42856 Y-69.40974
G01 X98.38952 Y-69.41360
G01 X98.35200 Y-69.42498
G01 X98.31743 Y-69.44345
G01 X98.28713 Y-69.46834
G01 X98.26224 Y-69.49864
G01 X98.24377 Y-69.53321
G01 X98.23239 Y-69.57073
G01 X98.22853 Y-69.60977
G01 X98.22853 Y-73.60978
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z5.00000 ( retract )
G00 X98.62856 Y-73.40976 ( rapid move to begin. )
G01 F50.00000
( Mill infeed pass 1/1 )
G01 Z-0.04000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F100.00000
G01 X98.62856 Y-73.40976
G01 X98.62856 Y-69.80977
G01 X99.10039 Y-69.80977
G01 X99.44260 Y-69.96186
G01 X99.67991 Y-70.27827
G01 X99.80661 Y-70.61609
G01 X99.94283 Y-71.34263
G01 X99.94283 Y-71.87689
G01 X99.80661 Y-72.60344
G01 X99.67991 Y-72.94126
G01 X99.44260 Y-73.25766
G01 X99.10039 Y-73.40976
G01 X98.62856 Y-73.40976
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z5.00000 ( retract )
G00 X101.08568 Y-70.75264 ( rapid move to begin. )
G01 F50.00000
( Mill infeed pass 1/1 )
G01 Z-0.04000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F100.00000
G01 X101.08568 Y-70.75264
G01 X101.08954 Y-70.71360
G01 X101.10092 Y-70.67608
G01 X101.11938 Y-70.64151
G01 X101.14427 Y-70.61121
G01 X101.17458 Y-70.58632
G01 X101.20914 Y-70.56785
G01 X101.24666 Y-70.55648
G01 X101.28570 Y-70.55261
G01 X103.14285 Y-70.55261
G01 X103.18186 Y-70.55648
G01 X103.21935 Y-70.56785
G01 X103.25390 Y-70.58632
G01 X103.28425 Y-70.61121
G01 X103.30909 Y-70.64151
G01 X103.32761 Y-70.67608
G01 X103.33896 Y-70.71360
G01 X103.34282 Y-70.75264
G01 X103.34282 Y-71.70501
G01 X103.33332 Y-71.76585
G01 X103.32169 Y-71.79445
G01 X103.03599 Y-72.36587
G01 X103.01712 Y-72.39643
G01 X102.58852 Y-72.96785
G01 X101.99855 Y-73.56071
G01 X101.96822 Y-73.58558
G01 X101.93365 Y-73.60407
G01 X101.89614 Y-73.61545
G01 X101.85712 Y-73.61931
G01 X101.81811 Y-73.61545
G01 X101.78059 Y-73.60407
G01 X101.74597 Y-73.58560
G01 X101.71570 Y-73.56074
G01 X101.69083 Y-73.53041
G01 X101.67234 Y-73.49584
G01 X101.66091 Y-73.45832
G01 X101.65710 Y-73.41931
G01 X101.66091 Y-73.38030
G01 X101.67234 Y-73.34278
G01 X101.69078 Y-73.30818
G01 X101.71562 Y-73.27788
G01 X102.27704 Y-72.71647
G01 X102.68628 Y-72.17085
G01 X102.94282 Y-71.65779
G01 X102.94282 Y-70.95264
G01 X101.28570 Y-70.95264
G01 X101.24666 Y-70.94878
G01 X101.20914 Y-70.93740
G01 X101.17458 Y-70.91893
G01 X101.14427 Y-70.89404
G01 X101.11938 Y-70.86374
G01 X101.10092 Y-70.82917
G01 X101.08954 Y-70.79165
G01 X101.08568 Y-70.75264
G01 X101.37140 Y-69.80024
G01 X101.37526 Y-69.83926
G01 X101.38664 Y-69.87677
G01 X101.40511 Y-69.91134
G01 X101.43000 Y-69.94164
G01 X101.46030 Y-69.96654
G01 X101.49487 Y-69.98500
G01 X101.53239 Y-69.99638
G01 X101.57142 Y-70.00024
G01 X103.00000 Y-70.00024
G01 X103.03901 Y-69.99638
G01 X103.07653 Y-69.98500
G01 X103.11107 Y-69.96654
G01 X103.14140 Y-69.94164
G01 X103.16627 Y-69.91134
G01 X103.18476 Y-69.87677
G01 X103.19611 Y-69.83926
G01 X103.20000 Y-69.80024
G01 X103.19611 Y-69.76120
G01 X103.18476 Y-69.72369
G01 X103.16627 Y-69.68912
G01 X103.14140 Y-69.65881
G01 X103.11107 Y-69.63392
G01 X103.07653 Y-69.61546
G01 X103.03901 Y-69.60408
G01 X103.00000 Y-69.60022
G01 X101.57142 Y-69.60022
G01 X101.53239 Y-69.60408
G01 X101.49487 Y-69.61546
G01 X101.46030 Y-69.63392
G01 X101.43000 Y-69.65881
G01 X101.40511 Y-69.68912
G01 X101.38664 Y-69.72369
G01 X101.37526 Y-69.76120
G01 X101.37140 Y-69.80024
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z5.00000 ( retract )
G00 X104.22875 Y-72.83813 ( rapid move to begin. )
G01 F50.00000
( Mill infeed pass 1/1 )
G01 Z-0.04000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F100.00000
G01 X104.22875 Y-72.83813
G01 X104.23451 Y-72.79935
G01 X104.37736 Y-72.22792
G01 X104.52296 Y-71.83592
G01 X104.66306 Y-71.27555
G01 X104.67627 Y-71.23862
G01 X104.69641 Y-71.20499
G01 X104.72273 Y-71.17591
G01 X104.75422 Y-71.15254
G01 X104.78966 Y-71.13577
G01 X104.82768 Y-71.12622
G01 X104.86685 Y-71.12429
G01 X104.90561 Y-71.13003
G01 X104.94254 Y-71.14322
G01 X104.97617 Y-71.16336
G01 X105.00523 Y-71.18967
G01 X105.02862 Y-71.22117
G01 X105.04538 Y-71.25660
G01 X105.05493 Y-71.29462
G01 X105.05686 Y-71.33379
G01 X105.05112 Y-71.37255
G01 X104.90822 Y-71.94398
G01 X104.76263 Y-72.33597
G01 X104.62255 Y-72.89635
G01 X104.60937 Y-72.93328
G01 X104.58922 Y-72.96691
G01 X104.56291 Y-72.99597
G01 X104.53144 Y-73.01934
G01 X104.49601 Y-73.03613
G01 X104.45798 Y-73.04568
G01 X104.41882 Y-73.04761
G01 X104.38003 Y-73.04187
G01 X104.34310 Y-73.02868
G01 X104.30944 Y-73.00854
G01 X104.28039 Y-72.98223
G01 X104.25704 Y-72.95076
G01 X104.24025 Y-72.91532
G01 X104.23068 Y-72.87730
G01 X104.22875 Y-72.83813
G01 X104.37137 Y-70.56217
G01 X104.37523 Y-70.60118
G01 X104.38658 Y-70.63870
G01 X104.40507 Y-70.67326
G01 X104.42997 Y-70.70357
G01 X104.46027 Y-70.72846
G01 X104.49484 Y-70.74692
G01 X104.53233 Y-70.75830
G01 X104.57139 Y-70.76216
G01 X105.22854 Y-70.76216
G01 X105.22854 Y-73.11154
G01 X105.08120 Y-73.04606
G01 X105.04396 Y-73.03371
G01 X105.00505 Y-73.02889
G01 X104.96598 Y-73.03173
G01 X104.92819 Y-73.04215
G01 X104.89314 Y-73.05975
G01 X104.86222 Y-73.08383
G01 X104.83657 Y-73.11349
G01 X104.81719 Y-73.14761
G01 X104.80487 Y-73.18482
G01 X104.80004 Y-73.22373
G01 X104.80289 Y-73.26282
G01 X104.81330 Y-73.30062
G01 X104.83091 Y-73.33567
G01 X104.85496 Y-73.36658
G01 X104.88465 Y-73.39223
G01 X104.91876 Y-73.41159
G01 X105.34734 Y-73.60206
G01 X105.38153 Y-73.61370
G01 X105.41724 Y-73.61898
G01 X105.45333 Y-73.61776
G01 X105.48861 Y-73.61006
G01 X105.52196 Y-73.59614
G01 X105.55219 Y-73.57646
G01 X105.57848 Y-73.55167
G01 X105.59981 Y-73.52254
G01 X105.61561 Y-73.49005
G01 X105.62529 Y-73.45528
G01 X105.62854 Y-73.41931
G01 X105.62854 Y-70.76216
G01 X106.28569 Y-70.76216
G01 X106.32470 Y-70.75830
G01 X106.36222 Y-70.74692
G01 X106.39679 Y-70.72846
G01 X106.42709 Y-70.70357
G01 X106.45198 Y-70.67326
G01 X106.47045 Y-70.63870
G01 X106.48183 Y-70.60118
G01 X106.48569 Y-70.56217
G01 X106.48183 Y-70.52313
G01 X106.47045 Y-70.48561
G01 X106.45198 Y-70.45104
G01 X106.42709 Y-70.42074
G01 X106.39679 Y-70.39585
G01 X106.36222 Y-70.37738
G01 X106.32470 Y-70.36600
G01 X106.28569 Y-70.36214
G01 X105.62854 Y-70.36214
G01 X105.62854 Y-69.41929
G01 X105.62466 Y-69.38025
G01 X105.61333 Y-69.34274
G01 X105.59486 Y-69.30817
G01 X105.56994 Y-69.27787
G01 X105.53967 Y-69.25297
G01 X105.50507 Y-69.23451
G01 X105.46758 Y-69.22313
G01 X105.42857 Y-69.21927
G01 X105.38950 Y-69.22313
G01 X105.35201 Y-69.23451
G01 X105.31744 Y-69.25297
G01 X105.28714 Y-69.27787
G01 X105.26225 Y-69.30817
G01 X105.24376 Y-69.34274
G01 X105.23240 Y-69.38025
G01 X105.22854 Y-69.41929
G01 X105.22854 Y-70.36214
G01 X104.57139 Y-70.36214
G01 X104.53233 Y-70.36600
G01 X104.49484 Y-70.37738
G01 X104.46027 Y-70.39585
G01 X104.42997 Y-70.42074
G01 X104.40507 Y-70.45104
G01 X104.38658 Y-70.48561
G01 X104.37523 Y-70.52313
G01 X104.37137 Y-70.56217
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z5.00000 ( retract )
G00 X105.65773 Y-71.33961 ( rapid move to begin. )
G01 F50.00000
( Mill infeed pass 1/1 )
G01 Z-0.04000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F100.00000
G01 X105.65773 Y-71.33961
G01 X105.65854 Y-71.30039
G01 X105.66695 Y-71.26211
G01 X105.68269 Y-71.22620
G01 X105.70515 Y-71.19404
G01 X105.73342 Y-71.16689
G01 X105.76646 Y-71.14578
G01 X105.80299 Y-71.13153
G01 X105.84157 Y-71.12465
G01 X105.88079 Y-71.12546
G01 X105.91904 Y-71.13389
G01 X105.95498 Y-71.14962
G01 X105.98714 Y-71.17207
G01 X106.01427 Y-71.20034
G01 X106.03540 Y-71.23339
G01 X106.04962 Y-71.26991
G01 X106.47820 Y-72.79371
G01 X106.48508 Y-72.83229
G01 X106.48427 Y-72.87151
G01 X106.47583 Y-72.90979
G01 X106.46011 Y-72.94570
G01 X106.43761 Y-72.97786
G01 X106.40936 Y-73.00501
G01 X106.37634 Y-73.02612
G01 X106.33982 Y-73.04037
G01 X106.30124 Y-73.04725
G01 X106.26202 Y-73.04644
G01 X106.22374 Y-73.03800
G01 X106.18777 Y-73.02228
G01 X106.15567 Y-72.99983
G01 X106.12852 Y-72.97156
G01 X106.10741 Y-72.93851
G01 X106.09316 Y-72.90199
G01 X105.66461 Y-71.37819
G01 X105.65773 Y-71.33961
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z5.00000 ( retract )
G00 X105.94310 Y-69.81111 ( rapid move to begin. )
G01 F50.00000
( Mill infeed pass 1/1 )
G01 Z-0.04000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F100.00000
G01 X105.94310 Y-69.81111
G01 X105.94485 Y-69.77195
G01 X105.95417 Y-69.73387
G01 X105.97071 Y-69.69834
G01 X105.99392 Y-69.66671
G01 X106.02283 Y-69.64022
G01 X106.05635 Y-69.61990
G01 X106.09318 Y-69.60649
G01 X106.13194 Y-69.60052
G01 X106.17111 Y-69.60225
G01 X106.20919 Y-69.61157
G01 X106.24472 Y-69.62813
G01 X106.27634 Y-69.65132
G01 X106.30284 Y-69.68023
G01 X106.58856 Y-70.06120
G01 X106.60888 Y-70.09473
G01 X106.62229 Y-70.13156
G01 X106.62826 Y-70.17032
G01 X106.62653 Y-70.20949
G01 X106.61721 Y-70.24756
G01 X106.60065 Y-70.28310
G01 X106.57746 Y-70.31472
G01 X106.54855 Y-70.34121
G01 X106.51503 Y-70.36153
G01 X106.47820 Y-70.37494
G01 X106.43939 Y-70.38091
G01 X106.40027 Y-70.37918
G01 X106.36220 Y-70.36986
G01 X106.32666 Y-70.35330
G01 X106.29504 Y-70.33011
G01 X106.26855 Y-70.30121
G01 X105.98280 Y-69.92023
G01 X105.96248 Y-69.88670
G01 X105.94906 Y-69.84987
G01 X105.94310 Y-69.81111
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z5.00000 ( retract )
G00 X106.37169 Y-69.62064 ( rapid move to begin. )
G01 F50.00000
( Mill infeed pass 1/1 )
G01 Z-0.04000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F100.00000
G01 X106.37169 Y-69.62064
G01 X106.37337 Y-69.58147
G01 X106.38274 Y-69.54340
G01 X106.39930 Y-69.50786
G01 X106.42244 Y-69.47624
G01 X106.45140 Y-69.44975
G01 X106.48490 Y-69.42943
G01 X106.52176 Y-69.41602
G01 X106.56052 Y-69.41005
G01 X106.59969 Y-69.41177
G01 X106.63776 Y-69.42110
G01 X106.67329 Y-69.43766
G01 X106.70492 Y-69.46085
G01 X106.73141 Y-69.48975
G01 X107.01713 Y-69.87070
G01 X107.03745 Y-69.90423
G01 X107.05087 Y-69.94106
G01 X107.05683 Y-69.97982
G01 X107.05511 Y-70.01899
G01 X107.04579 Y-70.05706
G01 X107.02922 Y-70.09260
G01 X107.00603 Y-70.12422
G01 X106.97713 Y-70.15071
G01 X106.94360 Y-70.17103
G01 X106.90677 Y-70.18444
G01 X106.86801 Y-70.19041
G01 X106.82884 Y-70.18868
G01 X106.79077 Y-70.17936
G01 X106.75523 Y-70.16280
G01 X106.72361 Y-70.13961
G01 X106.69712 Y-70.11071
G01 X106.41139 Y-69.72976
G01 X106.39108 Y-69.69623
G01 X106.37766 Y-69.65940
G01 X106.37169 Y-69.62064
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z5.00000 ( retract )
G00 X116.07495 Y-78.62499 ( rapid move to begin. )
G01 F50.00000
( Mill infeed pass 1/1 )
G01 Z-0.04000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F100.00000
G01 X116.07495 Y-78.62499
G01 X116.07495 Y-74.37498
G01 X116.08072 Y-74.31644
G01 X116.09781 Y-74.26018
G01 X116.12552 Y-74.20831
G01 X116.16284 Y-74.16284
G01 X119.39567 Y-70.93001
G01 X119.33969 Y-70.82526
G01 X119.29133 Y-70.66582
G01 X119.27500 Y-70.49999
G01 X119.29133 Y-70.33415
G01 X119.33969 Y-70.17471
G01 X119.41823 Y-70.02775
G01 X119.52394 Y-69.89895
G01 X119.65275 Y-69.79323
G01 X119.79971 Y-69.71469
G01 X119.95917 Y-69.66631
G01 X120.12498 Y-69.64997
G01 X120.37499 Y-69.64997
G01 X120.54081 Y-69.66631
G01 X120.70027 Y-69.71469
G01 X120.84723 Y-69.79323
G01 X120.97603 Y-69.89895
G01 X121.08172 Y-70.02775
G01 X121.16029 Y-70.17471
G01 X121.20865 Y-70.33415
G01 X121.22498 Y-70.49999
G01 X121.20865 Y-70.66582
G01 X121.16029 Y-70.82526
G01 X121.08172 Y-70.97222
G01 X120.97603 Y-71.10103
G01 X120.84723 Y-71.20674
G01 X120.70027 Y-71.28528
G01 X120.54081 Y-71.33366
G01 X120.37499 Y-71.35000
G01 X120.12498 Y-71.35000
G01 X119.95917 Y-71.33366
G01 X119.86816 Y-71.30606
G01 X116.67498 Y-74.49924
G01 X116.67498 Y-78.50071
G01 X118.86816 Y-80.69392
G01 X118.95917 Y-80.66631
G01 X119.12498 Y-80.64998
G01 X119.37500 Y-80.64998
G01 X119.54081 Y-80.66631
G01 X119.70027 Y-80.71470
G01 X119.84723 Y-80.79323
G01 X119.97604 Y-80.89895
G01 X120.08173 Y-81.02775
G01 X120.16029 Y-81.17472
G01 X120.20865 Y-81.33415
G01 X120.22498 Y-81.49999
G01 X120.20865 Y-81.66583
G01 X120.16029 Y-81.82526
G01 X120.10428 Y-81.93004
G01 X123.22424 Y-85.04997
G01 X151.08133 Y-85.04997
G01 X151.54996 Y-84.58134
G01 X151.54996 Y-79.89999
G01 X151.55573 Y-79.84145
G01 X151.57282 Y-79.78518
G01 X151.60053 Y-79.73332
G01 X151.63785 Y-79.68785
G01 X154.72712 Y-76.59855
G01 X154.71470 Y-76.57526
G01 X154.66631 Y-76.41582
G01 X154.64998 Y-76.24999
G01 X154.66631 Y-76.08415
G01 X154.71470 Y-75.92471
G01 X154.79324 Y-75.77775
G01 X154.89895 Y-75.64895
G01 X155.02776 Y-75.54323
G01 X155.17470 Y-75.46470
G01 X155.33416 Y-75.41631
G01 X155.49999 Y-75.39998
G01 X155.66580 Y-75.41631
G01 X155.82527 Y-75.46470
G01 X155.84853 Y-75.47714
G01 X156.93784 Y-74.38784
G01 X156.97363 Y-74.35726
G01 X157.01376 Y-74.33267
G01 X157.05727 Y-74.31466
G01 X157.10304 Y-74.30366
G01 X157.14998 Y-74.29995
G01 X161.18345 Y-74.29995
G01 X161.23036 Y-74.30366
G01 X161.27613 Y-74.31466
G01 X161.31964 Y-74.33267
G01 X161.35977 Y-74.35726
G01 X161.39556 Y-74.38784
G01 X164.08428 Y-77.07658
G01 X164.12159 Y-77.12205
G01 X164.14930 Y-77.17391
G01 X164.16640 Y-77.23017
G01 X164.17216 Y-77.28872
G01 X164.17216 Y-80.77261
G01 X168.27952 Y-84.87997
G01 X172.94570 Y-84.87997
G01 X175.14567 Y-82.68000
G01 X175.08969 Y-82.57527
G01 X175.04133 Y-82.41581
G01 X175.02500 Y-82.24998
G01 X175.04133 Y-82.08416
G01 X175.08969 Y-81.92470
G01 X175.16823 Y-81.77776
G01 X175.27394 Y-81.64893
G01 X175.40275 Y-81.54325
G01 X175.54971 Y-81.46468
G01 X175.70915 Y-81.41632
G01 X175.87498 Y-81.39999
G01 X176.12500 Y-81.39999
G01 X176.29081 Y-81.41632
G01 X176.45027 Y-81.46468
G01 X176.59723 Y-81.54325
G01 X176.72604 Y-81.64893
G01 X176.80892 Y-81.74995
G01 X182.44104 Y-81.74995
G01 X182.52394 Y-81.64893
G01 X182.65275 Y-81.54325
G01 X182.79971 Y-81.46468
G01 X182.95917 Y-81.41632
G01 X183.12498 Y-81.39999
G01 X183.37500 Y-81.39999
G01 X183.54081 Y-81.41632
G01 X183.59989 Y-81.43423
G01 X184.99773 Y-80.03642
G01 X185.07349 Y-79.97424
G01 X185.15993 Y-79.92803
G01 X185.25373 Y-79.89959
G01 X185.35129 Y-79.88996
G01 X191.48999 Y-79.88996
G01 X191.58753 Y-79.89959
G01 X191.68133 Y-79.92803
G01 X191.76776 Y-79.97424
G01 X191.84353 Y-80.03642
G01 X191.99708 Y-80.18996
G01 X202.35294 Y-80.18996
G01 X202.34999 Y-80.15999
G01 X202.36536 Y-80.00390
G01 X202.41087 Y-79.85384
G01 X202.48481 Y-79.71554
G01 X202.58430 Y-79.59430
G01 X202.70554 Y-79.49481
G01 X202.84384 Y-79.42087
G01 X202.99390 Y-79.37536
G01 X203.14999 Y-79.35999
G01 X203.30604 Y-79.37536
G01 X203.45613 Y-79.42087
G01 X203.59444 Y-79.49481
G01 X203.71565 Y-79.59430
G01 X203.81516 Y-79.71554
G01 X203.88910 Y-79.85384
G01 X203.93462 Y-80.00390
G01 X203.94999 Y-80.15999
G01 X203.93462 Y-80.31607
G01 X203.88910 Y-80.46613
G01 X203.81516 Y-80.60444
G01 X203.71565 Y-80.72567
G01 X203.59444 Y-80.82516
G01 X203.45613 Y-80.89910
G01 X203.30604 Y-80.94462
G01 X203.14999 Y-80.95999
G01 X203.06541 Y-80.95165
G01 X202.97353 Y-81.04353
G01 X202.89777 Y-81.10571
G01 X202.81133 Y-81.15191
G01 X202.71753 Y-81.18036
G01 X202.61999 Y-81.18998
G01 X191.78999 Y-81.18998
G01 X191.69243 Y-81.18036
G01 X191.59863 Y-81.15191
G01 X191.51219 Y-81.10571
G01 X191.43642 Y-81.04353
G01 X191.28288 Y-80.88998
G01 X185.55838 Y-80.88998
G01 X184.22259 Y-82.22574
G01 X184.22498 Y-82.24998
G01 X184.20865 Y-82.41581
G01 X184.16029 Y-82.57527
G01 X184.08172 Y-82.72221
G01 X183.97604 Y-82.85102
G01 X183.84723 Y-82.95673
G01 X183.70027 Y-83.03529
G01 X183.54081 Y-83.08365
G01 X183.37500 Y-83.09999
G01 X183.12498 Y-83.09999
G01 X182.95917 Y-83.08365
G01 X182.79971 Y-83.03529
G01 X182.65275 Y-82.95673
G01 X182.52394 Y-82.85102
G01 X182.44101 Y-82.74997
G01 X176.80897 Y-82.74997
G01 X176.72604 Y-82.85102
G01 X176.59723 Y-82.95673
G01 X176.45027 Y-83.03529
G01 X176.29081 Y-83.08365
G01 X176.12500 Y-83.09999
G01 X175.87498 Y-83.09999
G01 X175.70915 Y-83.08365
G01 X175.61814 Y-83.05604
G01 X173.28210 Y-85.39211
G01 X173.24631 Y-85.42269
G01 X173.20618 Y-85.44728
G01 X173.16267 Y-85.46528
G01 X173.11690 Y-85.47628
G01 X173.06999 Y-85.47999
G01 X168.15526 Y-85.47999
G01 X168.09672 Y-85.47423
G01 X168.04046 Y-85.45713
G01 X167.98859 Y-85.42942
G01 X167.94312 Y-85.39211
G01 X163.66002 Y-81.10901
G01 X163.62271 Y-81.06354
G01 X163.59500 Y-81.01167
G01 X163.57790 Y-80.95541
G01 X163.57214 Y-80.89689
G01 X163.57214 Y-77.41298
G01 X161.05916 Y-74.89998
G01 X157.27423 Y-74.89998
G01 X156.27281 Y-75.90137
G01 X156.28529 Y-75.92471
G01 X156.33365 Y-76.08415
G01 X156.34998 Y-76.24999
G01 X156.33365 Y-76.41582
G01 X156.28529 Y-76.57526
G01 X156.20675 Y-76.72222
G01 X156.10103 Y-76.85103
G01 X155.97223 Y-76.95674
G01 X155.82527 Y-77.03528
G01 X155.66580 Y-77.08367
G01 X155.49999 Y-77.10000
G01 X155.33416 Y-77.08367
G01 X155.17470 Y-77.03528
G01 X155.15138 Y-77.02281
G01 X152.14999 Y-80.02425
G01 X152.14999 Y-84.70562
G01 X152.14628 Y-84.75254
G01 X152.13528 Y-84.79831
G01 X152.11727 Y-84.84182
G01 X152.09269 Y-84.88195
G01 X152.06210 Y-84.91774
G01 X151.41773 Y-85.56211
G01 X151.37227 Y-85.59942
G01 X151.32040 Y-85.62713
G01 X151.26414 Y-85.64423
G01 X151.20562 Y-85.64999
G01 X123.09998 Y-85.64999
G01 X123.04144 Y-85.64423
G01 X122.98517 Y-85.62713
G01 X122.93331 Y-85.59942
G01 X122.88784 Y-85.56211
G01 X119.63179 Y-82.30606
G01 X119.54081 Y-82.33364
G01 X119.37500 Y-82.34998
G01 X119.12498 Y-82.34998
G01 X118.95917 Y-82.33364
G01 X118.79971 Y-82.28528
G01 X118.65275 Y-82.20674
G01 X118.52394 Y-82.10103
G01 X118.41823 Y-81.97223
G01 X118.33969 Y-81.82526
G01 X118.29133 Y-81.66583
G01 X118.27500 Y-81.49999
G01 X118.29133 Y-81.33415
G01 X118.33969 Y-81.17472
G01 X118.39567 Y-81.06997
G01 X116.16284 Y-78.83710
G01 X116.12552 Y-78.79164
G01 X116.09781 Y-78.73977
G01 X116.08072 Y-78.68351
G01 X116.07495 Y-78.62499
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z5.00000 ( retract )
G00 X117.17498 Y-77.22499 ( rapid move to begin. )
G01 F50.00000
( Mill infeed pass 1/1 )
G01 Z-0.04000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F100.00000
G01 X117.17498 Y-77.22499
G01 X117.17498 Y-75.77498
G01 X117.18074 Y-75.71643
G01 X117.19784 Y-75.66017
G01 X117.22555 Y-75.60831
G01 X117.26286 Y-75.56284
G01 X122.28784 Y-70.53786
G01 X122.33331 Y-70.50054
G01 X122.38518 Y-70.47283
G01 X122.44144 Y-70.45574
G01 X122.49998 Y-70.44997
G01 X126.33203 Y-70.44997
G01 X126.33970 Y-70.42470
G01 X126.41824 Y-70.27776
G01 X126.52395 Y-70.14896
G01 X126.65276 Y-70.04324
G01 X126.79970 Y-69.96468
G01 X126.95916 Y-69.91632
G01 X127.12499 Y-69.89999
G01 X127.37498 Y-69.89999
G01 X127.54082 Y-69.91632
G01 X127.70028 Y-69.96468
G01 X127.84722 Y-70.04324
G01 X127.97602 Y-70.14896
G01 X128.08174 Y-70.27776
G01 X128.16030 Y-70.42470
G01 X128.20866 Y-70.58416
G01 X128.22499 Y-70.75000
G01 X128.20866 Y-70.91581
G01 X128.16030 Y-71.07527
G01 X128.08174 Y-71.22221
G01 X127.97602 Y-71.35104
G01 X127.84722 Y-71.45673
G01 X127.70028 Y-71.53529
G01 X127.54082 Y-71.58365
G01 X127.37498 Y-71.59998
G01 X127.12499 Y-71.59998
G01 X126.95916 Y-71.58365
G01 X126.79970 Y-71.53529
G01 X126.65276 Y-71.45673
G01 X126.52395 Y-71.35104
G01 X126.41824 Y-71.22221
G01 X126.33970 Y-71.07527
G01 X126.33203 Y-71.05000
G01 X122.62424 Y-71.05000
G01 X117.77500 Y-75.89924
G01 X117.77500 Y-77.10071
G01 X118.86819 Y-78.19393
G01 X118.95917 Y-78.16632
G01 X119.12498 Y-78.14998
G01 X119.37500 Y-78.14998
G01 X119.54081 Y-78.16632
G01 X119.70027 Y-78.21468
G01 X119.84723 Y-78.29324
G01 X119.97604 Y-78.39895
G01 X120.08173 Y-78.52776
G01 X120.16029 Y-78.67470
G01 X120.20865 Y-78.83416
G01 X120.22498 Y-78.99999
G01 X120.20865 Y-79.16581
G01 X120.16029 Y-79.32527
G01 X120.10428 Y-79.43002
G01 X124.46211 Y-83.78784
G01 X124.49942 Y-83.83331
G01 X124.52713 Y-83.88518
G01 X124.54506 Y-83.94997
G01 X150.44997 Y-83.94997
G01 X150.44997 Y-78.66654
G01 X150.45573 Y-78.60800
G01 X150.47283 Y-78.55174
G01 X150.50054 Y-78.49987
G01 X150.53785 Y-78.45440
G01 X155.70439 Y-73.28784
G01 X155.74018 Y-73.25726
G01 X155.78031 Y-73.23267
G01 X155.82382 Y-73.21466
G01 X155.86959 Y-73.20366
G01 X155.91653 Y-73.19996
G01 X156.44571 Y-73.19996
G01 X155.84858 Y-72.60283
G01 X155.82527 Y-72.61527
G01 X155.66580 Y-72.66366
G01 X155.49999 Y-72.67999
G01 X155.33416 Y-72.66366
G01 X155.17470 Y-72.61527
G01 X155.02776 Y-72.53674
G01 X154.89895 Y-72.43102
G01 X154.79324 Y-72.30222
G01 X154.71470 Y-72.15528
G01 X154.66631 Y-71.99582
G01 X154.64998 Y-71.82998
G01 X154.66631 Y-71.66417
G01 X154.71470 Y-71.50471
G01 X154.79324 Y-71.35774
G01 X154.89895 Y-71.22894
G01 X155.02776 Y-71.12323
G01 X155.17470 Y-71.04469
G01 X155.33416 Y-70.99633
G01 X155.49999 Y-70.98000
G01 X155.66580 Y-70.99633
G01 X155.82527 Y-71.04469
G01 X155.97223 Y-71.12323
G01 X156.10103 Y-71.22894
G01 X156.20675 Y-71.35774
G01 X156.28529 Y-71.50471
G01 X156.33365 Y-71.66417
G01 X156.34998 Y-71.82998
G01 X156.33365 Y-71.99582
G01 X156.28529 Y-72.15528
G01 X156.27284 Y-72.17857
G01 X157.29425 Y-73.19996
G01 X161.63907 Y-73.19996
G01 X161.68599 Y-73.20366
G01 X161.73176 Y-73.21466
G01 X161.77527 Y-73.23267
G01 X161.81540 Y-73.25726
G01 X161.85119 Y-73.28784
G01 X165.18428 Y-76.62095
G01 X165.22159 Y-76.66642
G01 X165.24930 Y-76.71829
G01 X165.26640 Y-76.77455
G01 X165.27216 Y-76.83310
G01 X165.27216 Y-80.31698
G01 X168.73515 Y-83.77997
G01 X172.04571 Y-83.77997
G01 X175.38418 Y-80.44150
G01 X175.27394 Y-80.35102
G01 X175.16823 Y-80.22222
G01 X175.08969 Y-80.07528
G01 X175.04133 Y-79.91582
G01 X175.02500 Y-79.74998
G01 X175.04133 Y-79.58417
G01 X175.08969 Y-79.42471
G01 X175.16823 Y-79.27774
G01 X175.27394 Y-79.14894
G01 X175.40275 Y-79.04325
G01 X175.54971 Y-78.96469
G01 X175.70915 Y-78.91633
G01 X175.87498 Y-78.89999
G01 X176.12500 Y-78.89999
G01 X176.29081 Y-78.91633
G01 X176.45027 Y-78.96469
G01 X176.59723 Y-79.04325
G01 X176.72604 Y-79.14894
G01 X176.83173 Y-79.27774
G01 X176.91029 Y-79.42471
G01 X176.95865 Y-79.58417
G01 X176.97498 Y-79.74995
G01 X182.27500 Y-79.74995
G01 X182.29133 Y-79.58417
G01 X182.33969 Y-79.42471
G01 X182.41823 Y-79.27774
G01 X182.52394 Y-79.14894
G01 X182.65275 Y-79.04325
G01 X182.79971 Y-78.96469
G01 X182.95917 Y-78.91633
G01 X183.12498 Y-78.89999
G01 X183.37500 Y-78.89999
G01 X183.54081 Y-78.91633
G01 X183.59989 Y-78.93423
G01 X183.99773 Y-78.53642
G01 X184.07350 Y-78.47424
G01 X184.15993 Y-78.42804
G01 X184.25373 Y-78.39959
G01 X184.35129 Y-78.38996
G01 X199.99041 Y-78.38996
G01 X200.04430 Y-78.32430
G01 X200.16554 Y-78.22481
G01 X200.30384 Y-78.15087
G01 X200.45390 Y-78.10536
G01 X200.60999 Y-78.08999
G01 X200.76607 Y-78.10536
G01 X200.91613 Y-78.15087
G01 X201.05444 Y-78.22481
G01 X201.17567 Y-78.32430
G01 X201.27516 Y-78.44554
G01 X201.34910 Y-78.58384
G01 X201.39462 Y-78.73390
G01 X201.40999 Y-78.88999
G01 X201.39462 Y-79.04607
G01 X201.34910 Y-79.19613
G01 X201.27516 Y-79.33444
G01 X201.17567 Y-79.45567
G01 X201.05444 Y-79.55516
G01 X200.91613 Y-79.62910
G01 X200.76607 Y-79.67462
G01 X200.60999 Y-79.68999
G01 X200.45390 Y-79.67462
G01 X200.30384 Y-79.62910
G01 X200.16554 Y-79.55516
G01 X200.04430 Y-79.45567
G01 X199.99038 Y-79.38999
G01 X184.55838 Y-79.38999
G01 X184.22259 Y-79.72575
G01 X184.22498 Y-79.74998
G01 X184.20865 Y-79.91582
G01 X184.16029 Y-80.07528
G01 X184.08172 Y-80.22222
G01 X183.97604 Y-80.35102
G01 X183.84723 Y-80.45674
G01 X183.70027 Y-80.53530
G01 X183.64601 Y-80.55176
G01 X183.60352 Y-80.60352
G01 X183.52775 Y-80.66570
G01 X183.44131 Y-80.71190
G01 X183.34751 Y-80.74035
G01 X183.24998 Y-80.74998
G01 X175.99998 Y-80.74998
G01 X175.93102 Y-80.74317
G01 X172.38210 Y-84.29211
G01 X172.34632 Y-84.32269
G01 X172.30618 Y-84.34728
G01 X172.26267 Y-84.36529
G01 X172.21690 Y-84.37629
G01 X172.16999 Y-84.37999
G01 X168.61089 Y-84.37999
G01 X168.55234 Y-84.37423
G01 X168.49608 Y-84.35713
G01 X168.44421 Y-84.32942
G01 X168.39875 Y-84.29211
G01 X164.76002 Y-80.65338
G01 X164.72271 Y-80.60792
G01 X164.69500 Y-80.55605
G01 X164.67790 Y-80.49979
G01 X164.67214 Y-80.44127
G01 X164.67214 Y-76.95735
G01 X161.51479 Y-73.79998
G01 X156.04079 Y-73.79998
G01 X151.04999 Y-78.79080
G01 X151.04999 Y-84.25000
G01 X151.04422 Y-84.30852
G01 X151.02713 Y-84.36478
G01 X150.99942 Y-84.41665
G01 X150.96211 Y-84.46211
G01 X150.91664 Y-84.49942
G01 X150.86477 Y-84.52714
G01 X150.80851 Y-84.54423
G01 X150.74999 Y-84.55000
G01 X124.24999 Y-84.55000
G01 X124.19145 Y-84.54423
G01 X124.13518 Y-84.52714
G01 X124.08332 Y-84.49942
G01 X124.03785 Y-84.46211
G01 X124.00054 Y-84.41665
G01 X123.97283 Y-84.36478
G01 X123.95573 Y-84.30852
G01 X123.94997 Y-84.25000
G01 X123.94997 Y-84.12424
G01 X119.63179 Y-79.80606
G01 X119.54081 Y-79.83365
G01 X119.37500 Y-79.84998
G01 X119.12498 Y-79.84998
G01 X118.95917 Y-79.83365
G01 X118.79971 Y-79.78529
G01 X118.65275 Y-79.70672
G01 X118.52394 Y-79.60103
G01 X118.41823 Y-79.47223
G01 X118.33969 Y-79.32527
G01 X118.29133 Y-79.16581
G01 X118.27500 Y-78.99999
G01 X118.29133 Y-78.83416
G01 X118.33969 Y-78.67470
G01 X118.39570 Y-78.56995
G01 X117.26286 Y-77.43711
G01 X117.22555 Y-77.39164
G01 X117.19784 Y-77.33977
G01 X117.18074 Y-77.28351
G01 X117.17498 Y-77.22499
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z5.00000 ( retract )
G00 X118.27500 Y-76.50000 ( rapid move to begin. )
G01 F50.00000
( Mill infeed pass 1/1 )
G01 Z-0.04000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F100.00000
G01 X118.27500 Y-76.50000
G01 X118.29133 Y-76.66581
G01 X118.33969 Y-76.82527
G01 X118.41823 Y-76.97221
G01 X118.52394 Y-77.10104
G01 X118.65275 Y-77.20673
G01 X118.79971 Y-77.28529
G01 X118.95917 Y-77.33365
G01 X119.12498 Y-77.34999
G01 X119.37500 Y-77.34999
G01 X119.54081 Y-77.33365
G01 X119.70027 Y-77.28529
G01 X119.80502 Y-77.22928
G01 X125.93785 Y-83.36211
G01 X125.98331 Y-83.39943
G01 X126.03518 Y-83.42714
G01 X126.09144 Y-83.44423
G01 X126.14999 Y-83.45000
G01 X148.26343 Y-83.45000
G01 X148.32195 Y-83.44423
G01 X148.37821 Y-83.42714
G01 X148.43008 Y-83.39943
G01 X148.47555 Y-83.36211
G01 X149.86211 Y-81.97555
G01 X149.89942 Y-81.93009
G01 X149.92713 Y-81.87822
G01 X149.94423 Y-81.82196
G01 X149.94999 Y-81.76344
G01 X149.94999 Y-75.26424
G01 X155.15138 Y-70.06283
G01 X155.17470 Y-70.07527
G01 X155.33416 Y-70.12366
G01 X155.49999 Y-70.13999
G01 X155.66580 Y-70.12366
G01 X155.82527 Y-70.07527
G01 X155.97223 Y-69.99674
G01 X156.10103 Y-69.89102
G01 X156.20675 Y-69.76222
G01 X156.28529 Y-69.61528
G01 X156.29296 Y-69.58998
G01 X157.83570 Y-69.58998
G01 X159.72714 Y-71.48142
G01 X159.71469 Y-71.50471
G01 X159.66633 Y-71.66417
G01 X159.65000 Y-71.82998
G01 X159.66633 Y-71.99582
G01 X159.71469 Y-72.15528
G01 X159.79323 Y-72.30222
G01 X159.89894 Y-72.43102
G01 X160.02775 Y-72.53674
G01 X160.17471 Y-72.61527
G01 X160.33417 Y-72.66366
G01 X160.49998 Y-72.67999
G01 X160.66582 Y-72.66366
G01 X160.82526 Y-72.61527
G01 X160.97222 Y-72.53674
G01 X161.10102 Y-72.43102
G01 X161.20674 Y-72.30222
G01 X161.28528 Y-72.15528
G01 X161.29297 Y-72.12998
G01 X161.40044 Y-72.12998
G01 X166.24323 Y-76.97280
G01 X166.24323 Y-80.45671
G01 X166.24899 Y-80.51523
G01 X166.26609 Y-80.57149
G01 X166.29380 Y-80.62336
G01 X166.33111 Y-80.66883
G01 X168.85440 Y-83.19211
G01 X168.89987 Y-83.22942
G01 X168.95173 Y-83.25714
G01 X169.00799 Y-83.27423
G01 X169.06654 Y-83.28000
G01 X170.76999 Y-83.28000
G01 X170.81690 Y-83.27629
G01 X170.86268 Y-83.26529
G01 X170.90619 Y-83.24728
G01 X170.94632 Y-83.22269
G01 X170.98211 Y-83.19211
G01 X176.07422 Y-78.10000
G01 X176.12500 Y-78.10000
G01 X176.29081 Y-78.08366
G01 X176.45027 Y-78.03528
G01 X176.59723 Y-77.95674
G01 X176.72604 Y-77.85103
G01 X176.80897 Y-77.74998
G01 X182.44101 Y-77.74998
G01 X182.52394 Y-77.85103
G01 X182.65275 Y-77.95674
G01 X182.79971 Y-78.03528
G01 X182.95917 Y-78.08366
G01 X183.12498 Y-78.10000
G01 X183.37500 Y-78.10000
G01 X183.54081 Y-78.08366
G01 X183.70027 Y-78.03528
G01 X183.84723 Y-77.95674
G01 X183.97604 Y-77.85103
G01 X184.05897 Y-77.74998
G01 X199.70999 Y-77.74998
G01 X199.80753 Y-77.74036
G01 X199.90133 Y-77.71191
G01 X199.98776 Y-77.66571
G01 X200.06353 Y-77.60353
G01 X200.52541 Y-77.14165
G01 X200.60999 Y-77.14999
G01 X200.76607 Y-77.13462
G01 X200.91613 Y-77.08910
G01 X201.05444 Y-77.01516
G01 X201.17567 Y-76.91567
G01 X201.27516 Y-76.79444
G01 X201.34910 Y-76.65613
G01 X201.39462 Y-76.50607
G01 X201.40999 Y-76.34999
G01 X201.39462 Y-76.19390
G01 X201.34910 Y-76.04384
G01 X201.27516 Y-75.90554
G01 X201.17567 Y-75.78430
G01 X201.05444 Y-75.68481
G01 X200.91613 Y-75.61087
G01 X200.76607 Y-75.56536
G01 X200.60999 Y-75.54999
G01 X200.45390 Y-75.56536
G01 X200.30384 Y-75.61087
G01 X200.16554 Y-75.68481
G01 X200.04430 Y-75.78430
G01 X199.94481 Y-75.90554
G01 X199.87087 Y-76.04384
G01 X199.82536 Y-76.19390
G01 X199.80999 Y-76.34999
G01 X199.81832 Y-76.43452
G01 X199.50288 Y-76.74996
G01 X184.05894 Y-76.74996
G01 X183.97604 Y-76.64894
G01 X183.84723 Y-76.54323
G01 X183.70027 Y-76.46469
G01 X183.54081 Y-76.41633
G01 X183.37500 Y-76.40000
G01 X183.12498 Y-76.40000
G01 X182.95917 Y-76.41633
G01 X182.79971 Y-76.46469
G01 X182.65275 Y-76.54323
G01 X182.52394 Y-76.64894
G01 X182.44104 Y-76.74996
G01 X176.80894 Y-76.74996
G01 X176.72604 Y-76.64894
G01 X176.59723 Y-76.54323
G01 X176.45027 Y-76.46469
G01 X176.29081 Y-76.41633
G01 X176.12500 Y-76.40000
G01 X175.87498 Y-76.40000
G01 X175.70915 Y-76.41633
G01 X175.54971 Y-76.46469
G01 X175.40275 Y-76.54323
G01 X175.27394 Y-76.64894
G01 X175.16823 Y-76.77775
G01 X175.08969 Y-76.92471
G01 X175.04133 Y-77.08415
G01 X175.02500 Y-77.24999
G01 X175.04133 Y-77.41582
G01 X175.08969 Y-77.57526
G01 X175.16823 Y-77.72222
G01 X175.27394 Y-77.85103
G01 X175.38418 Y-77.94150
G01 X170.64571 Y-82.67997
G01 X169.19080 Y-82.67997
G01 X166.84325 Y-80.33243
G01 X166.84325 Y-76.84854
G01 X166.83749 Y-76.78999
G01 X166.82039 Y-76.73373
G01 X166.79268 Y-76.68186
G01 X166.75537 Y-76.63640
G01 X161.73684 Y-71.61784
G01 X161.70105 Y-71.58726
G01 X161.66092 Y-71.56267
G01 X161.61741 Y-71.54466
G01 X161.57164 Y-71.53366
G01 X161.52472 Y-71.52996
G01 X161.29295 Y-71.52996
G01 X161.28528 Y-71.50471
G01 X161.20674 Y-71.35774
G01 X161.10102 Y-71.22894
G01 X160.97222 Y-71.12323
G01 X160.82526 Y-71.04469
G01 X160.66582 Y-70.99633
G01 X160.49998 Y-70.98000
G01 X160.33417 Y-70.99633
G01 X160.17471 Y-71.04469
G01 X160.15142 Y-71.05713
G01 X158.17210 Y-69.07784
G01 X158.12663 Y-69.04053
G01 X158.07477 Y-69.01282
G01 X158.01851 Y-68.99572
G01 X157.95998 Y-68.98996
G01 X156.29296 Y-68.98996
G01 X156.28529 Y-68.96471
G01 X156.20675 Y-68.81774
G01 X156.10103 Y-68.68894
G01 X155.97223 Y-68.58323
G01 X155.82527 Y-68.50469
G01 X155.66580 Y-68.45633
G01 X155.49999 Y-68.44000
G01 X155.33416 Y-68.45633
G01 X155.17470 Y-68.50469
G01 X155.02776 Y-68.58323
G01 X154.89895 Y-68.68894
G01 X154.79324 Y-68.81774
G01 X154.71470 Y-68.96471
G01 X154.66631 Y-69.12417
G01 X154.64998 Y-69.28998
G01 X154.66631 Y-69.45582
G01 X154.71470 Y-69.61528
G01 X154.72712 Y-69.63854
G01 X149.43785 Y-74.92784
G01 X149.40054 Y-74.97331
G01 X149.37283 Y-75.02517
G01 X149.35573 Y-75.08143
G01 X149.34997 Y-75.13998
G01 X149.34997 Y-81.63916
G01 X148.13915 Y-82.84997
G01 X126.27425 Y-82.84997
G01 X120.18107 Y-76.75679
G01 X120.20865 Y-76.66581
G01 X120.22498 Y-76.50000
G01 X120.20865 Y-76.33416
G01 X120.16029 Y-76.17470
G01 X120.14782 Y-76.15141
G01 X122.74923 Y-73.54999
G01 X126.33203 Y-73.54999
G01 X126.33970 Y-73.57527
G01 X126.41824 Y-73.72223
G01 X126.52395 Y-73.85103
G01 X126.65276 Y-73.95675
G01 X126.79970 Y-74.03529
G01 X126.95916 Y-74.08365
G01 X127.12499 Y-74.09998
G01 X127.37498 Y-74.09998
G01 X127.54082 Y-74.08365
G01 X127.70028 Y-74.03529
G01 X127.84722 Y-73.95675
G01 X127.97602 Y-73.85103
G01 X128.08174 Y-73.72223
G01 X128.16030 Y-73.57527
G01 X128.20866 Y-73.41580
G01 X128.22499 Y-73.24999
G01 X128.20866 Y-73.08416
G01 X128.16030 Y-72.92470
G01 X128.08174 Y-72.77776
G01 X127.97602 Y-72.64895
G01 X127.84722 Y-72.54324
G01 X127.70028 Y-72.46470
G01 X127.54082 Y-72.41631
G01 X127.37498 Y-72.39998
G01 X127.12499 Y-72.39998
G01 X126.95916 Y-72.41631
G01 X126.79970 Y-72.46470
G01 X126.65276 Y-72.54324
G01 X126.52395 Y-72.64895
G01 X126.41824 Y-72.77776
G01 X126.33970 Y-72.92470
G01 X126.33203 Y-72.94997
G01 X122.62498 Y-72.94997
G01 X122.57804 Y-72.95368
G01 X122.53227 Y-72.96467
G01 X122.48876 Y-72.98268
G01 X122.44862 Y-73.00727
G01 X122.41284 Y-73.03785
G01 X119.72356 Y-75.72713
G01 X119.70027 Y-75.71468
G01 X119.54081 Y-75.66632
G01 X119.37500 Y-75.64999
G01 X119.12498 Y-75.64999
G01 X118.95917 Y-75.66632
G01 X118.79971 Y-75.71468
G01 X118.65275 Y-75.79324
G01 X118.52394 Y-75.89896
G01 X118.41823 Y-76.02776
G01 X118.33969 Y-76.17470
G01 X118.29133 Y-76.33416
G01 X118.27500 Y-76.50000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z5.00000 ( retract )
G00 X134.09999 Y-76.24999 ( rapid move to begin. )
G01 F50.00000
( Mill infeed pass 1/1 )
G01 Z-0.04000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F100.00000
G01 X134.09999 Y-76.24999
G01 X134.11632 Y-76.08415
G01 X134.16468 Y-75.92471
G01 X134.24324 Y-75.77775
G01 X134.34896 Y-75.64895
G01 X134.47776 Y-75.54323
G01 X134.62470 Y-75.46470
G01 X134.78416 Y-75.41631
G01 X134.95000 Y-75.39998
G01 X135.11581 Y-75.41631
G01 X135.27527 Y-75.46470
G01 X135.29856 Y-75.47714
G01 X136.38784 Y-74.38784
G01 X136.42363 Y-74.35726
G01 X136.46376 Y-74.33267
G01 X136.50727 Y-74.31466
G01 X136.55304 Y-74.30366
G01 X136.59998 Y-74.29995
G01 X142.54434 Y-74.29995
G01 X142.60286 Y-74.30572
G01 X142.65913 Y-74.32281
G01 X142.71099 Y-74.35052
G01 X142.75646 Y-74.38784
G01 X146.85861 Y-78.48996
G01 X146.95703 Y-78.48996
G01 X146.96468 Y-78.46471
G01 X147.04324 Y-78.31775
G01 X147.14896 Y-78.18895
G01 X147.27776 Y-78.08323
G01 X147.42470 Y-78.00470
G01 X147.58416 Y-77.95631
G01 X147.75000 Y-77.93998
G01 X147.91581 Y-77.95631
G01 X148.07527 Y-78.00470
G01 X148.22223 Y-78.08323
G01 X148.35104 Y-78.18895
G01 X148.45673 Y-78.31775
G01 X148.53529 Y-78.46471
G01 X148.58365 Y-78.62415
G01 X148.59998 Y-78.78999
G01 X148.58365 Y-78.95582
G01 X148.53529 Y-79.11526
G01 X148.45673 Y-79.26222
G01 X148.35104 Y-79.39103
G01 X148.22223 Y-79.49674
G01 X148.07527 Y-79.57528
G01 X147.91581 Y-79.62367
G01 X147.75000 Y-79.64000
G01 X147.58416 Y-79.62367
G01 X147.42470 Y-79.57528
G01 X147.27776 Y-79.49674
G01 X147.14896 Y-79.39103
G01 X147.04324 Y-79.26222
G01 X146.96468 Y-79.11526
G01 X146.95701 Y-79.08999
G01 X146.73435 Y-79.08999
G01 X146.67581 Y-79.08422
G01 X146.61954 Y-79.06713
G01 X146.56768 Y-79.03942
G01 X146.52221 Y-79.00210
G01 X142.42006 Y-74.89998
G01 X136.72424 Y-74.89998
G01 X135.72282 Y-75.90140
G01 X135.73529 Y-75.92471
G01 X135.78365 Y-76.08415
G01 X135.79998 Y-76.24999
G01 X135.78365 Y-76.41582
G01 X135.73529 Y-76.57526
G01 X135.65673 Y-76.72222
G01 X135.55104 Y-76.85103
G01 X135.42223 Y-76.95674
G01 X135.27527 Y-77.03528
G01 X135.11581 Y-77.08367
G01 X134.95000 Y-77.10000
G01 X134.78416 Y-77.08367
G01 X134.62470 Y-77.03528
G01 X134.47776 Y-76.95674
G01 X134.34896 Y-76.85103
G01 X134.24324 Y-76.72222
G01 X134.16468 Y-76.57526
G01 X134.11632 Y-76.41582
G01 X134.09999 Y-76.24999
G01 X134.15000 Y-71.82998
G01 X134.16633 Y-71.99582
G01 X134.21469 Y-72.15528
G01 X134.29323 Y-72.30222
G01 X134.39894 Y-72.43102
G01 X134.52775 Y-72.53674
G01 X134.67471 Y-72.61527
G01 X134.83417 Y-72.66366
G01 X134.99998 Y-72.67999
G01 X135.16582 Y-72.66366
G01 X135.32526 Y-72.61527
G01 X135.34857 Y-72.60283
G01 X136.45784 Y-73.71210
G01 X136.50331 Y-73.74941
G01 X136.55518 Y-73.77712
G01 X136.61144 Y-73.79421
G01 X136.66998 Y-73.79998
G01 X142.87571 Y-73.79998
G01 X145.53783 Y-76.46210
G01 X145.57362 Y-76.49268
G01 X145.61375 Y-76.51727
G01 X145.65727 Y-76.53528
G01 X145.70304 Y-76.54628
G01 X145.74998 Y-76.54999
G01 X146.95701 Y-76.54999
G01 X146.96468 Y-76.57526
G01 X147.04324 Y-76.72222
G01 X147.14896 Y-76.85103
G01 X147.27776 Y-76.95674
G01 X147.42470 Y-77.03528
G01 X147.58416 Y-77.08367
G01 X147.75000 Y-77.10000
G01 X147.91581 Y-77.08367
G01 X148.07527 Y-77.03528
G01 X148.22223 Y-76.95674
G01 X148.35104 Y-76.85103
G01 X148.45673 Y-76.72222
G01 X148.53529 Y-76.57526
G01 X148.58365 Y-76.41582
G01 X148.59998 Y-76.24999
G01 X148.58365 Y-76.08415
G01 X148.53529 Y-75.92471
G01 X148.45673 Y-75.77775
G01 X148.35104 Y-75.64895
G01 X148.22223 Y-75.54323
G01 X148.07527 Y-75.46470
G01 X147.91581 Y-75.41631
G01 X147.75000 Y-75.39998
G01 X147.58416 Y-75.41631
G01 X147.42470 Y-75.46470
G01 X147.27776 Y-75.54323
G01 X147.14896 Y-75.64895
G01 X147.04324 Y-75.77775
G01 X146.96468 Y-75.92471
G01 X146.95703 Y-75.94996
G01 X145.87423 Y-75.94996
G01 X143.21211 Y-73.28784
G01 X143.17632 Y-73.25726
G01 X143.13619 Y-73.23267
G01 X143.09268 Y-73.21466
G01 X143.04691 Y-73.20366
G01 X142.99999 Y-73.19996
G01 X136.79424 Y-73.19996
G01 X135.77283 Y-72.17857
G01 X135.78528 Y-72.15528
G01 X135.83366 Y-71.99582
G01 X135.84999 Y-71.82998
G01 X135.83366 Y-71.66417
G01 X135.78528 Y-71.50471
G01 X135.70674 Y-71.35774
G01 X135.60102 Y-71.22894
G01 X135.47222 Y-71.12323
G01 X135.32526 Y-71.04469
G01 X135.16582 Y-70.99633
G01 X134.99998 Y-70.98000
G01 X134.83417 Y-70.99633
G01 X134.67471 Y-71.04469
G01 X134.52775 Y-71.12323
G01 X134.39894 Y-71.22894
G01 X134.29323 Y-71.35774
G01 X134.21469 Y-71.50471
G01 X134.16633 Y-71.66417
G01 X134.15000 Y-71.82998
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z5.00000 ( retract )
G00 X139.09998 Y-76.24999 ( rapid move to begin. )
G01 F50.00000
( Mill infeed pass 1/1 )
G01 Z-0.04000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F100.00000
G01 X139.09998 Y-76.24999
G01 X139.11631 Y-76.41582
G01 X139.16469 Y-76.57526
G01 X139.24323 Y-76.72222
G01 X139.34895 Y-76.85103
G01 X139.47775 Y-76.95674
G01 X139.62471 Y-77.03528
G01 X139.78415 Y-77.08367
G01 X139.94999 Y-77.10000
G01 X140.11582 Y-77.08367
G01 X140.27526 Y-77.03528
G01 X140.29858 Y-77.02283
G01 X142.44996 Y-79.17424
G01 X142.44996 Y-82.04998
G01 X142.45572 Y-82.10850
G01 X142.47282 Y-82.16476
G01 X142.50053 Y-82.21662
G01 X142.53784 Y-82.26209
G01 X142.58331 Y-82.29940
G01 X142.63517 Y-82.32711
G01 X142.69143 Y-82.34421
G01 X142.74998 Y-82.34998
G01 X147.69998 Y-82.34998
G01 X147.75848 Y-82.34421
G01 X147.81474 Y-82.32714
G01 X147.86658 Y-82.29943
G01 X147.91205 Y-82.26214
G01 X147.96206 Y-82.21215
G01 X147.99264 Y-82.17637
G01 X148.01886 Y-82.13240
G01 X148.07527 Y-82.11528
G01 X148.22223 Y-82.03674
G01 X148.35104 Y-81.93103
G01 X148.45673 Y-81.80222
G01 X148.53529 Y-81.65526
G01 X148.58365 Y-81.49582
G01 X148.59998 Y-81.32999
G01 X148.58365 Y-81.16415
G01 X148.53529 Y-81.00471
G01 X148.45673 Y-80.85775
G01 X148.35104 Y-80.72895
G01 X148.22223 Y-80.62323
G01 X148.07527 Y-80.54470
G01 X147.91581 Y-80.49631
G01 X147.75000 Y-80.47998
G01 X147.58416 Y-80.49631
G01 X147.42470 Y-80.54470
G01 X147.27776 Y-80.62323
G01 X147.14896 Y-80.72895
G01 X147.04324 Y-80.85775
G01 X146.96468 Y-81.00471
G01 X146.91632 Y-81.16415
G01 X146.89999 Y-81.32999
G01 X146.91632 Y-81.49582
G01 X146.96468 Y-81.65526
G01 X147.01530 Y-81.74995
G01 X143.04998 Y-81.74995
G01 X143.04998 Y-79.04998
G01 X143.04421 Y-78.99143
G01 X143.02712 Y-78.93517
G01 X142.99941 Y-78.88331
G01 X142.96210 Y-78.83784
G01 X140.72283 Y-76.59858
G01 X140.73528 Y-76.57526
G01 X140.78367 Y-76.41582
G01 X140.80000 Y-76.24999
G01 X140.78367 Y-76.08415
G01 X140.73528 Y-75.92471
G01 X140.65674 Y-75.77775
G01 X140.55103 Y-75.64895
G01 X140.42222 Y-75.54323
G01 X140.27526 Y-75.46470
G01 X140.11582 Y-75.41631
G01 X139.94999 Y-75.39998
G01 X139.78415 Y-75.41631
G01 X139.62471 Y-75.46470
G01 X139.47775 Y-75.54323
G01 X139.34895 Y-75.64895
G01 X139.24323 Y-75.77775
G01 X139.16469 Y-75.92471
G01 X139.11631 Y-76.08415
G01 X139.09998 Y-76.24999
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z5.00000 ( retract )
G00 X139.14999 Y-71.82998 ( rapid move to begin. )
G01 F50.00000
( Mill infeed pass 1/1 )
G01 Z-0.04000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F100.00000
G01 X139.14999 Y-71.82998
G01 X139.16632 Y-71.99582
G01 X139.21468 Y-72.15528
G01 X139.29324 Y-72.30222
G01 X139.39896 Y-72.43102
G01 X139.52776 Y-72.53674
G01 X139.67470 Y-72.61527
G01 X139.83416 Y-72.66366
G01 X140.00000 Y-72.67999
G01 X140.16581 Y-72.66366
G01 X140.32527 Y-72.61527
G01 X140.46617 Y-72.53999
G01 X144.83288 Y-72.53999
G01 X146.35643 Y-74.06353
G01 X146.43219 Y-74.12571
G01 X146.51863 Y-74.17191
G01 X146.61243 Y-74.20036
G01 X146.70999 Y-74.20999
G01 X147.06603 Y-74.20999
G01 X147.14896 Y-74.31103
G01 X147.27776 Y-74.41674
G01 X147.42470 Y-74.49528
G01 X147.58416 Y-74.54367
G01 X147.75000 Y-74.56000
G01 X147.91581 Y-74.54367
G01 X148.07527 Y-74.49528
G01 X148.22223 Y-74.41674
G01 X148.35104 Y-74.31103
G01 X148.45673 Y-74.18222
G01 X148.53529 Y-74.03526
G01 X148.58365 Y-73.87582
G01 X148.59998 Y-73.70999
G01 X148.58365 Y-73.54415
G01 X148.53529 Y-73.38471
G01 X148.45673 Y-73.23775
G01 X148.35104 Y-73.10895
G01 X148.22223 Y-73.00323
G01 X148.07527 Y-72.92470
G01 X147.91581 Y-72.87631
G01 X147.75000 Y-72.85998
G01 X147.58416 Y-72.87631
G01 X147.42470 Y-72.92470
G01 X147.27776 Y-73.00323
G01 X147.14896 Y-73.10895
G01 X147.06603 Y-73.20996
G01 X146.91708 Y-73.20996
G01 X145.39354 Y-71.68642
G01 X145.31777 Y-71.62424
G01 X145.23133 Y-71.57804
G01 X145.13753 Y-71.54959
G01 X145.03999 Y-71.53996
G01 X140.79598 Y-71.53996
G01 X140.78529 Y-71.50471
G01 X140.70673 Y-71.35774
G01 X140.60104 Y-71.22894
G01 X140.47221 Y-71.12323
G01 X140.32527 Y-71.04469
G01 X140.16581 Y-70.99633
G01 X140.00000 Y-70.98000
G01 X139.83416 Y-70.99633
G01 X139.67470 Y-71.04469
G01 X139.52776 Y-71.12323
G01 X139.39896 Y-71.22894
G01 X139.29324 Y-71.35774
G01 X139.21468 Y-71.50471
G01 X139.16632 Y-71.66417
G01 X139.14999 Y-71.82998
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z5.00000 ( retract )
G00 X154.64998 Y-78.78999 ( rapid move to begin. )
G01 F50.00000
( Mill infeed pass 1/1 )
G01 Z-0.04000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F100.00000
G01 X154.64998 Y-78.78999
G01 X154.66631 Y-78.95582
G01 X154.71470 Y-79.11526
G01 X154.79324 Y-79.26222
G01 X154.89895 Y-79.39103
G01 X155.02776 Y-79.49674
G01 X155.17470 Y-79.57528
G01 X155.33416 Y-79.62367
G01 X155.49999 Y-79.64000
G01 X155.66580 Y-79.62367
G01 X155.82527 Y-79.57528
G01 X155.97223 Y-79.49674
G01 X156.10103 Y-79.39103
G01 X156.20675 Y-79.26222
G01 X156.28529 Y-79.11526
G01 X156.33365 Y-78.95582
G01 X156.34998 Y-78.78999
G01 X156.33365 Y-78.62415
G01 X156.28529 Y-78.46471
G01 X156.20675 Y-78.31775
G01 X156.10103 Y-78.18895
G01 X155.97223 Y-78.08323
G01 X155.82527 Y-78.00470
G01 X155.66580 Y-77.95631
G01 X155.49999 Y-77.93998
G01 X155.33416 Y-77.95631
G01 X155.17470 Y-78.00470
G01 X155.02776 Y-78.08323
G01 X154.89895 Y-78.18895
G01 X154.79324 Y-78.31775
G01 X154.71470 Y-78.46471
G01 X154.66631 Y-78.62415
G01 X154.64998 Y-78.78999
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z5.00000 ( retract )
G00 X159.65000 Y-78.78999 ( rapid move to begin. )
G01 F50.00000
( Mill infeed pass 1/1 )
G01 Z-0.04000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F100.00000
G01 X159.65000 Y-78.78999
G01 X159.66633 Y-78.95582
G01 X159.71469 Y-79.11526
G01 X159.79323 Y-79.26222
G01 X159.89894 Y-79.39103
G01 X160.02775 Y-79.49674
G01 X160.17471 Y-79.57528
G01 X160.33417 Y-79.62367
G01 X160.49998 Y-79.64000
G01 X160.66582 Y-79.62367
G01 X160.82526 Y-79.57528
G01 X160.97222 Y-79.49674
G01 X161.10102 Y-79.39103
G01 X161.20674 Y-79.26222
G01 X161.28528 Y-79.11526
G01 X161.33366 Y-78.95582
G01 X161.34999 Y-78.78999
G01 X161.33366 Y-78.62415
G01 X161.28528 Y-78.46471
G01 X161.20674 Y-78.31775
G01 X161.10102 Y-78.18895
G01 X160.97222 Y-78.08323
G01 X160.82526 Y-78.00470
G01 X160.66582 Y-77.95631
G01 X160.49998 Y-77.93998
G01 X160.33417 Y-77.95631
G01 X160.17471 Y-78.00470
G01 X160.02775 Y-78.08323
G01 X159.89894 Y-78.18895
G01 X159.79323 Y-78.31775
G01 X159.71469 Y-78.46471
G01 X159.66633 Y-78.62415
G01 X159.65000 Y-78.78999
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z5.00000 ( retract )
G00 X159.65000 Y-76.24999 ( rapid move to begin. )
G01 F50.00000
( Mill infeed pass 1/1 )
G01 Z-0.04000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F100.00000
G01 X159.65000 Y-76.24999
G01 X159.66633 Y-76.41582
G01 X159.71469 Y-76.57526
G01 X159.79323 Y-76.72222
G01 X159.89894 Y-76.85103
G01 X160.02775 Y-76.95674
G01 X160.17471 Y-77.03528
G01 X160.33417 Y-77.08367
G01 X160.49998 Y-77.10000
G01 X160.66582 Y-77.08367
G01 X160.82526 Y-77.03528
G01 X160.84857 Y-77.02283
G01 X162.47214 Y-78.64643
G01 X162.47214 Y-81.55216
G01 X162.47791 Y-81.61068
G01 X162.49500 Y-81.66694
G01 X162.52271 Y-81.71881
G01 X162.56003 Y-81.76428
G01 X167.28785 Y-86.49211
G01 X167.33332 Y-86.52942
G01 X167.38519 Y-86.55713
G01 X167.44145 Y-86.57422
G01 X167.50000 Y-86.57999
G01 X173.52561 Y-86.57999
G01 X173.58413 Y-86.57422
G01 X173.64039 Y-86.55713
G01 X173.69226 Y-86.52942
G01 X173.73773 Y-86.49211
G01 X175.11230 Y-85.11756
G01 X175.16823 Y-85.22223
G01 X175.27394 Y-85.35104
G01 X175.40275 Y-85.45673
G01 X175.54971 Y-85.53529
G01 X175.70915 Y-85.58365
G01 X175.87498 Y-85.59998
G01 X176.12500 Y-85.59998
G01 X176.29081 Y-85.58365
G01 X176.45027 Y-85.53529
G01 X176.59723 Y-85.45673
G01 X176.72604 Y-85.35104
G01 X176.80894 Y-85.24999
G01 X182.44101 Y-85.24999
G01 X182.52394 Y-85.35104
G01 X182.65275 Y-85.45673
G01 X182.79971 Y-85.53529
G01 X182.95917 Y-85.58365
G01 X183.12498 Y-85.59998
G01 X183.37500 Y-85.59998
G01 X183.54081 Y-85.58365
G01 X183.70027 Y-85.53529
G01 X183.84723 Y-85.45673
G01 X183.97604 Y-85.35104
G01 X184.05894 Y-85.24999
G01 X184.43999 Y-85.24999
G01 X184.51820 Y-85.24382
G01 X184.59450 Y-85.22551
G01 X184.66697 Y-85.19549
G01 X184.73387 Y-85.15449
G01 X184.79353 Y-85.10354
G01 X187.14707 Y-82.74997
G01 X188.16599 Y-82.74997
G01 X188.24895 Y-82.85102
G01 X188.37775 Y-82.95673
G01 X188.52472 Y-83.03529
G01 X188.68415 Y-83.08365
G01 X188.84999 Y-83.09999
G01 X189.09998 Y-83.09999
G01 X189.26581 Y-83.08365
G01 X189.42528 Y-83.03529
G01 X189.57221 Y-82.95673
G01 X189.70102 Y-82.85102
G01 X189.78397 Y-82.74997
G01 X203.60556 Y-82.74997
G01 X203.70310 Y-82.74035
G01 X203.79690 Y-82.71190
G01 X203.88334 Y-82.66570
G01 X203.95908 Y-82.60352
G01 X205.35354 Y-81.20911
G01 X205.40449 Y-81.14944
G01 X205.44549 Y-81.08254
G01 X205.47551 Y-81.01007
G01 X205.49382 Y-80.93377
G01 X205.50000 Y-80.85557
G01 X205.50000 Y-78.33863
G01 X205.49037 Y-78.24107
G01 X205.46192 Y-78.14727
G01 X205.41569 Y-78.06083
G01 X205.35354 Y-77.98506
G01 X204.63490 Y-77.26642
G01 X204.57523 Y-77.21547
G01 X204.50830 Y-77.17447
G01 X204.43584 Y-77.14445
G01 X204.35956 Y-77.12613
G01 X204.28135 Y-77.11996
G01 X203.76957 Y-77.11996
G01 X203.71565 Y-77.05430
G01 X203.59444 Y-76.95481
G01 X203.45613 Y-76.88087
G01 X203.30604 Y-76.83536
G01 X203.14999 Y-76.81999
G01 X202.99390 Y-76.83536
G01 X202.84384 Y-76.88087
G01 X202.70554 Y-76.95481
G01 X202.58430 Y-77.05430
G01 X202.48481 Y-77.17554
G01 X202.41087 Y-77.31384
G01 X202.36536 Y-77.46390
G01 X202.34999 Y-77.61999
G01 X202.36536 Y-77.77607
G01 X202.41087 Y-77.92613
G01 X202.48481 Y-78.06444
G01 X202.58430 Y-78.18567
G01 X202.70554 Y-78.28516
G01 X202.84384 Y-78.35910
G01 X202.99390 Y-78.40462
G01 X203.14999 Y-78.41999
G01 X203.30604 Y-78.40462
G01 X203.45613 Y-78.35910
G01 X203.59444 Y-78.28516
G01 X203.71565 Y-78.18567
G01 X203.76959 Y-78.11999
G01 X204.07424 Y-78.11999
G01 X204.49997 Y-78.54572
G01 X204.49997 Y-80.64845
G01 X203.39845 Y-81.74995
G01 X189.78392 Y-81.74995
G01 X189.70102 Y-81.64893
G01 X189.57221 Y-81.54325
G01 X189.42528 Y-81.46468
G01 X189.26581 Y-81.41632
G01 X189.09998 Y-81.39999
G01 X188.84999 Y-81.39999
G01 X188.68415 Y-81.41632
G01 X188.52472 Y-81.46468
G01 X188.37775 Y-81.54325
G01 X188.24895 Y-81.64893
G01 X188.16604 Y-81.74995
G01 X186.93999 Y-81.74995
G01 X186.86175 Y-81.75612
G01 X186.78545 Y-81.77444
G01 X186.71299 Y-81.80446
G01 X186.64608 Y-81.84545
G01 X186.58642 Y-81.89641
G01 X184.23288 Y-84.24997
G01 X184.05894 Y-84.24997
G01 X183.97604 Y-84.14896
G01 X183.84723 Y-84.04324
G01 X183.70027 Y-83.96468
G01 X183.54081 Y-83.91632
G01 X183.37500 Y-83.89998
G01 X183.12498 Y-83.89998
G01 X182.95917 Y-83.91632
G01 X182.79971 Y-83.96468
G01 X182.65275 Y-84.04324
G01 X182.52394 Y-84.14896
G01 X182.44104 Y-84.24997
G01 X176.80894 Y-84.24997
G01 X176.72604 Y-84.14896
G01 X176.59723 Y-84.04324
G01 X176.45027 Y-83.96468
G01 X176.29081 Y-83.91632
G01 X176.12500 Y-83.89998
G01 X175.87498 Y-83.89998
G01 X175.70915 Y-83.91632
G01 X175.54971 Y-83.96468
G01 X175.40275 Y-84.04324
G01 X175.27394 Y-84.14896
G01 X175.16823 Y-84.27776
G01 X175.08969 Y-84.42470
G01 X175.08202 Y-84.44997
G01 X174.99708 Y-84.45574
G01 X174.94082 Y-84.47283
G01 X174.88896 Y-84.50054
G01 X174.84349 Y-84.53785
G01 X173.40133 Y-85.97997
G01 X167.62425 Y-85.97997
G01 X163.07217 Y-81.42788
G01 X163.07217 Y-78.52217
G01 X163.06640 Y-78.46362
G01 X163.04931 Y-78.40736
G01 X163.02159 Y-78.35549
G01 X162.98428 Y-78.31003
G01 X161.27283 Y-76.59858
G01 X161.28528 Y-76.57526
G01 X161.33366 Y-76.41582
G01 X161.34999 Y-76.24999
G01 X161.33366 Y-76.08415
G01 X161.28528 Y-75.92471
G01 X161.20674 Y-75.77775
G01 X161.10102 Y-75.64895
G01 X160.97222 Y-75.54323
G01 X160.82526 Y-75.46470
G01 X160.66582 Y-75.41631
G01 X160.49998 Y-75.39998
G01 X160.33417 Y-75.41631
G01 X160.17471 Y-75.46470
G01 X160.02775 Y-75.54323
G01 X159.89894 Y-75.64895
G01 X159.79323 Y-75.77775
G01 X159.71469 Y-75.92471
G01 X159.66633 Y-76.08415
G01 X159.65000 Y-76.24999
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z5.00000 ( retract )
G00 X159.65000 Y-69.28998 ( rapid move to begin. )
G01 F50.00000
( Mill infeed pass 1/1 )
G01 Z-0.04000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F100.00000
G01 X159.65000 Y-69.28998
G01 X159.66633 Y-69.45582
G01 X159.71469 Y-69.61528
G01 X159.79323 Y-69.76222
G01 X159.89894 Y-69.89102
G01 X160.02775 Y-69.99674
G01 X160.17471 Y-70.07527
G01 X160.33417 Y-70.12366
G01 X160.49998 Y-70.13999
G01 X160.66582 Y-70.12366
G01 X160.82526 Y-70.07527
G01 X160.97222 Y-69.99674
G01 X161.10102 Y-69.89102
G01 X161.20674 Y-69.76222
G01 X161.28528 Y-69.61528
G01 X161.33366 Y-69.45582
G01 X161.34999 Y-69.28998
G01 X161.33366 Y-69.12417
G01 X161.28528 Y-68.96471
G01 X161.20674 Y-68.81774
G01 X161.10102 Y-68.68894
G01 X160.97222 Y-68.58323
G01 X160.82526 Y-68.50469
G01 X160.66582 Y-68.45633
G01 X160.49998 Y-68.44000
G01 X160.33417 Y-68.45633
G01 X160.17471 Y-68.50469
G01 X160.02775 Y-68.58323
G01 X159.89894 Y-68.68894
G01 X159.79323 Y-68.81774
G01 X159.71469 Y-68.96471
G01 X159.66633 Y-69.12417
G01 X159.65000 Y-69.28998
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z5.00000 ( retract )
G00 X168.89999 Y-71.16999 ( rapid move to begin. )
G01 F50.00000
( Mill infeed pass 1/1 )
G01 Z-0.04000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F100.00000
G01 X168.89999 Y-71.16999
G01 X168.91632 Y-71.00415
G01 X168.96469 Y-70.84471
G01 X169.04325 Y-70.69775
G01 X169.14894 Y-70.56895
G01 X169.27774 Y-70.46323
G01 X169.42471 Y-70.38470
G01 X169.58417 Y-70.33631
G01 X169.74998 Y-70.31998
G01 X169.91581 Y-70.33631
G01 X169.96339 Y-70.35076
G01 X172.91771 Y-67.39641
G01 X172.99348 Y-67.33423
G01 X173.07992 Y-67.28803
G01 X173.17372 Y-67.25958
G01 X173.27128 Y-67.24995
G01 X175.02500 Y-67.24995
G01 X175.04133 Y-67.08417
G01 X175.08969 Y-66.92471
G01 X175.16823 Y-66.77774
G01 X175.27394 Y-66.64894
G01 X175.40275 Y-66.54325
G01 X175.54971 Y-66.46469
G01 X175.70915 Y-66.41633
G01 X175.87498 Y-66.39999
G01 X176.12500 Y-66.39999
G01 X176.29081 Y-66.41633
G01 X176.45027 Y-66.46469
G01 X176.59723 Y-66.54325
G01 X176.72604 Y-66.64894
G01 X176.83173 Y-66.77774
G01 X176.91029 Y-66.92471
G01 X176.95865 Y-67.08417
G01 X176.97498 Y-67.24995
G01 X182.27500 Y-67.24995
G01 X182.29133 Y-67.08417
G01 X182.33969 Y-66.92471
G01 X182.41823 Y-66.77774
G01 X182.52394 Y-66.64894
G01 X182.65275 Y-66.54325
G01 X182.79971 Y-66.46469
G01 X182.95917 Y-66.41633
G01 X183.12498 Y-66.39999
G01 X183.37500 Y-66.39999
G01 X183.54081 Y-66.41633
G01 X183.70027 Y-66.46469
G01 X183.84723 Y-66.54325
G01 X183.97604 Y-66.64894
G01 X184.08172 Y-66.77774
G01 X184.16029 Y-66.92471
G01 X184.20865 Y-67.08417
G01 X184.22498 Y-67.24995
G01 X202.08712 Y-67.24995
G01 X202.16533 Y-67.25613
G01 X202.24163 Y-67.27444
G01 X202.31410 Y-67.30446
G01 X202.38100 Y-67.34546
G01 X202.44067 Y-67.39641
G01 X205.30350 Y-70.25930
G01 X205.36571 Y-70.33506
G01 X205.41191 Y-70.42150
G01 X205.44036 Y-70.51530
G01 X205.44998 Y-70.61286
G01 X205.44998 Y-74.41136
G01 X205.44036 Y-74.50889
G01 X205.41191 Y-74.60270
G01 X205.36571 Y-74.68913
G01 X205.30350 Y-74.76490
G01 X204.63490 Y-75.43353
G01 X204.57523 Y-75.48448
G01 X204.50830 Y-75.52548
G01 X204.43584 Y-75.55550
G01 X204.35956 Y-75.57381
G01 X204.28135 Y-75.57999
G01 X203.76959 Y-75.57999
G01 X203.71565 Y-75.64567
G01 X203.59444 Y-75.74516
G01 X203.45613 Y-75.81910
G01 X203.30604 Y-75.86462
G01 X203.14999 Y-75.87999
G01 X202.99390 Y-75.86462
G01 X202.84384 Y-75.81910
G01 X202.70554 Y-75.74516
G01 X202.58430 Y-75.64567
G01 X202.48481 Y-75.52444
G01 X202.41087 Y-75.38613
G01 X202.36536 Y-75.23607
G01 X202.34999 Y-75.07999
G01 X202.36536 Y-74.92390
G01 X202.41087 Y-74.77384
G01 X202.48481 Y-74.63554
G01 X202.58430 Y-74.51430
G01 X202.70554 Y-74.41481
G01 X202.84384 Y-74.34087
G01 X202.99390 Y-74.29536
G01 X203.14999 Y-74.27999
G01 X203.30604 Y-74.29536
G01 X203.45613 Y-74.34087
G01 X203.59444 Y-74.41481
G01 X203.71565 Y-74.51430
G01 X203.76957 Y-74.57996
G01 X204.07424 Y-74.57996
G01 X204.44996 Y-74.20425
G01 X204.44996 Y-70.81995
G01 X201.88001 Y-68.24998
G01 X183.74998 Y-68.24998
G01 X183.65241 Y-68.24035
G01 X183.55861 Y-68.21190
G01 X183.49996 Y-68.18056
G01 X183.44131 Y-68.21190
G01 X183.34751 Y-68.24035
G01 X183.24998 Y-68.24998
G01 X173.47837 Y-68.24998
G01 X170.59626 Y-71.13209
G01 X170.59999 Y-71.16999
G01 X170.58366 Y-71.33582
G01 X170.53530 Y-71.49526
G01 X170.45673 Y-71.64222
G01 X170.35102 Y-71.77103
G01 X170.22221 Y-71.87674
G01 X170.07528 Y-71.95528
G01 X169.91581 Y-72.00367
G01 X169.74998 Y-72.02000
G01 X169.58417 Y-72.00367
G01 X169.42471 Y-71.95528
G01 X169.27774 Y-71.87674
G01 X169.14894 Y-71.77103
G01 X169.04325 Y-71.64222
G01 X168.96469 Y-71.49526
G01 X168.91632 Y-71.33582
G01 X168.89999 Y-71.16999
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z5.00000 ( retract )
G00 X168.89999 Y-73.70999 ( rapid move to begin. )
G01 F50.00000
( Mill infeed pass 1/1 )
G01 Z-0.04000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F100.00000
G01 X168.89999 Y-73.70999
G01 X168.91632 Y-73.54415
G01 X168.96469 Y-73.38471
G01 X169.04325 Y-73.23775
G01 X169.14894 Y-73.10895
G01 X169.27774 Y-73.00323
G01 X169.42471 Y-72.92470
G01 X169.58417 Y-72.87631
G01 X169.74998 Y-72.85998
G01 X169.91581 Y-72.87631
G01 X169.94421 Y-72.88492
G01 X173.43272 Y-69.39641
G01 X173.50849 Y-69.33423
G01 X173.59493 Y-69.28802
G01 X173.68873 Y-69.25958
G01 X173.78629 Y-69.24995
G01 X175.19104 Y-69.24995
G01 X175.27394 Y-69.14893
G01 X175.40275 Y-69.04325
G01 X175.54971 Y-68.96468
G01 X175.70915 Y-68.91632
G01 X175.87498 Y-68.89999
G01 X176.12500 Y-68.89999
G01 X176.29081 Y-68.91632
G01 X176.45027 Y-68.96468
G01 X176.59723 Y-69.04325
G01 X176.72604 Y-69.14893
G01 X176.80892 Y-69.24995
G01 X182.44104 Y-69.24995
G01 X182.52394 Y-69.14893
G01 X182.65275 Y-69.04325
G01 X182.79971 Y-68.96468
G01 X182.95917 Y-68.91632
G01 X183.12498 Y-68.89999
G01 X183.39123 Y-68.90159
G01 X183.47218 Y-68.83423
G01 X183.55861 Y-68.78803
G01 X183.65241 Y-68.75958
G01 X183.74998 Y-68.74995
G01 X201.46579 Y-68.74995
G01 X201.56333 Y-68.75958
G01 X201.65713 Y-68.78803
G01 X201.74356 Y-68.83423
G01 X201.81933 Y-68.89641
G01 X203.50353 Y-70.58061
G01 X203.56571 Y-70.65637
G01 X203.61189 Y-70.74281
G01 X203.64033 Y-70.83661
G01 X203.64999 Y-70.93417
G01 X203.64999 Y-71.92038
G01 X203.71565 Y-71.97430
G01 X203.81516 Y-72.09554
G01 X203.88910 Y-72.23384
G01 X203.93462 Y-72.38390
G01 X203.94999 Y-72.53999
G01 X203.93462 Y-72.69607
G01 X203.88910 Y-72.84613
G01 X203.81516 Y-72.98444
G01 X203.71565 Y-73.10567
G01 X203.59444 Y-73.20516
G01 X203.45613 Y-73.27910
G01 X203.30604 Y-73.32462
G01 X203.14999 Y-73.33999
G01 X202.99390 Y-73.32462
G01 X202.84384 Y-73.27910
G01 X202.70554 Y-73.20516
G01 X202.58430 Y-73.10567
G01 X202.48481 Y-72.98444
G01 X202.41087 Y-72.84613
G01 X202.36536 Y-72.69607
G01 X202.34999 Y-72.53999
G01 X202.36536 Y-72.38390
G01 X202.41087 Y-72.23384
G01 X202.48481 Y-72.09554
G01 X202.58430 Y-71.97430
G01 X202.64996 Y-71.92040
G01 X202.64996 Y-71.14126
G01 X201.25868 Y-69.74997
G01 X184.22498 Y-69.74997
G01 X184.20865 Y-69.91581
G01 X184.16029 Y-70.07527
G01 X184.08172 Y-70.22221
G01 X183.97604 Y-70.35104
G01 X183.84723 Y-70.45673
G01 X183.70027 Y-70.53529
G01 X183.54081 Y-70.58365
G01 X183.37500 Y-70.59999
G01 X183.12498 Y-70.59999
G01 X182.95917 Y-70.58365
G01 X182.79971 Y-70.53529
G01 X182.65275 Y-70.45673
G01 X182.52394 Y-70.35104
G01 X182.44101 Y-70.24997
G01 X176.80897 Y-70.24997
G01 X176.72604 Y-70.35104
G01 X176.59723 Y-70.45673
G01 X176.45027 Y-70.53529
G01 X176.29081 Y-70.58365
G01 X176.12500 Y-70.59999
G01 X175.87498 Y-70.59999
G01 X175.70915 Y-70.58365
G01 X175.54971 Y-70.53529
G01 X175.40275 Y-70.45673
G01 X175.27394 Y-70.35104
G01 X175.19101 Y-70.24997
G01 X173.99338 Y-70.24997
G01 X173.74014 Y-70.50321
G01 X173.72701 Y-70.52777
G01 X173.66483 Y-70.60354
G01 X170.59626 Y-73.67209
G01 X170.59999 Y-73.70999
G01 X170.58366 Y-73.87582
G01 X170.53530 Y-74.03526
G01 X170.45673 Y-74.18222
G01 X170.35102 Y-74.31103
G01 X170.22221 Y-74.41674
G01 X170.07528 Y-74.49528
G01 X169.91581 Y-74.54367
G01 X169.74998 Y-74.56000
G01 X169.58417 Y-74.54367
G01 X169.42471 Y-74.49528
G01 X169.27774 Y-74.41674
G01 X169.14894 Y-74.31103
G01 X169.04325 Y-74.18222
G01 X168.96469 Y-74.03526
G01 X168.91632 Y-73.87582
G01 X168.89999 Y-73.70999
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z5.00000 ( retract )
G00 X168.89999 Y-76.24999 ( rapid move to begin. )
G01 F50.00000
( Mill infeed pass 1/1 )
G01 Z-0.04000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F100.00000
G01 X168.89999 Y-76.24999
G01 X168.91632 Y-76.41582
G01 X168.96469 Y-76.57526
G01 X169.04325 Y-76.72222
G01 X169.14894 Y-76.85103
G01 X169.27774 Y-76.95674
G01 X169.42471 Y-77.03528
G01 X169.58417 Y-77.08367
G01 X169.74998 Y-77.10000
G01 X169.91581 Y-77.08367
G01 X170.07528 Y-77.03528
G01 X170.22221 Y-76.95674
G01 X170.35102 Y-76.85103
G01 X170.45673 Y-76.72222
G01 X170.53530 Y-76.57526
G01 X170.58366 Y-76.41582
G01 X170.59999 Y-76.24999
G01 X170.59626 Y-76.21209
G01 X174.05838 Y-72.74999
G01 X175.19101 Y-72.74999
G01 X175.27394 Y-72.85104
G01 X175.40275 Y-72.95672
G01 X175.54971 Y-73.03529
G01 X175.70915 Y-73.08365
G01 X175.87498 Y-73.09998
G01 X176.12500 Y-73.09998
G01 X176.29081 Y-73.08365
G01 X176.45027 Y-73.03529
G01 X176.59723 Y-72.95672
G01 X176.72604 Y-72.85104
G01 X176.80894 Y-72.74999
G01 X182.44101 Y-72.74999
G01 X182.52394 Y-72.85104
G01 X182.65275 Y-72.95672
G01 X182.79971 Y-73.03529
G01 X182.95917 Y-73.08365
G01 X183.12498 Y-73.09998
G01 X183.37500 Y-73.09998
G01 X183.54081 Y-73.08365
G01 X183.70027 Y-73.03529
G01 X183.84723 Y-72.95672
G01 X183.97604 Y-72.85104
G01 X184.05897 Y-72.74999
G01 X199.02000 Y-72.74999
G01 X199.09820 Y-72.74382
G01 X199.17451 Y-72.72551
G01 X199.24697 Y-72.69549
G01 X199.31388 Y-72.65449
G01 X199.37354 Y-72.60354
G01 X199.93889 Y-72.03818
G01 X199.96307 Y-72.05111
G01 X200.00961 Y-72.06521
G01 X200.05799 Y-72.06999
G01 X201.16198 Y-72.06999
G01 X201.21037 Y-72.06521
G01 X201.25690 Y-72.05111
G01 X201.29978 Y-72.02820
G01 X201.33734 Y-71.99734
G01 X201.36820 Y-71.95977
G01 X201.39111 Y-71.91690
G01 X201.40521 Y-71.87037
G01 X201.40999 Y-71.82198
G01 X201.40999 Y-70.71799
G01 X201.40521 Y-70.66961
G01 X201.39111 Y-70.62307
G01 X201.36820 Y-70.58020
G01 X201.33734 Y-70.54263
G01 X201.29978 Y-70.51177
G01 X201.25690 Y-70.48886
G01 X201.21037 Y-70.47476
G01 X201.16198 Y-70.46999
G01 X200.05799 Y-70.46999
G01 X200.00961 Y-70.47476
G01 X199.96307 Y-70.48886
G01 X199.92020 Y-70.51177
G01 X199.88263 Y-70.54263
G01 X199.85177 Y-70.58020
G01 X199.82886 Y-70.62307
G01 X199.81476 Y-70.66961
G01 X199.80999 Y-70.71799
G01 X199.80999 Y-70.80913
G01 X199.77298 Y-70.82447
G01 X199.70608 Y-70.86547
G01 X199.64641 Y-70.91642
G01 X198.81289 Y-71.74997
G01 X184.05894 Y-71.74997
G01 X183.97604 Y-71.64896
G01 X183.84723 Y-71.54324
G01 X183.70027 Y-71.46468
G01 X183.54081 Y-71.41632
G01 X183.37500 Y-71.39998
G01 X183.12498 Y-71.39998
G01 X182.95917 Y-71.41632
G01 X182.79971 Y-71.46468
G01 X182.65275 Y-71.54324
G01 X182.52394 Y-71.64896
G01 X182.44104 Y-71.74997
G01 X176.80894 Y-71.74997
G01 X176.72604 Y-71.64896
G01 X176.59723 Y-71.54324
G01 X176.45027 Y-71.46468
G01 X176.29081 Y-71.41632
G01 X176.12500 Y-71.39998
G01 X175.87498 Y-71.39998
G01 X175.70915 Y-71.41632
G01 X175.54971 Y-71.46468
G01 X175.40275 Y-71.54324
G01 X175.27394 Y-71.64896
G01 X175.19104 Y-71.74997
G01 X173.85129 Y-71.74997
G01 X173.75373 Y-71.75960
G01 X173.65993 Y-71.78805
G01 X173.57349 Y-71.83425
G01 X173.49772 Y-71.89643
G01 X169.96339 Y-75.43076
G01 X169.91581 Y-75.41631
G01 X169.74998 Y-75.39998
G01 X169.58417 Y-75.41631
G01 X169.42471 Y-75.46470
G01 X169.27774 Y-75.54323
G01 X169.14894 Y-75.64895
G01 X169.04325 Y-75.77775
G01 X168.96469 Y-75.92471
G01 X168.91632 Y-76.08415
G01 X168.89999 Y-76.24999
G01 X168.89999 Y-79.38999
G01 X168.89999 Y-78.18999
G01 X168.90479 Y-78.14122
G01 X168.91902 Y-78.09431
G01 X168.94213 Y-78.05110
G01 X168.97322 Y-78.01320
G01 X169.01109 Y-77.98211
G01 X169.05432 Y-77.95903
G01 X169.10121 Y-77.94480
G01 X169.14998 Y-77.93998
G01 X169.96915 Y-77.93998
G01 X173.51271 Y-74.39642
G01 X173.58848 Y-74.33424
G01 X173.67491 Y-74.28804
G01 X173.76872 Y-74.25959
G01 X173.86628 Y-74.24997
G01 X175.19104 Y-74.24997
G01 X175.27394 Y-74.14895
G01 X175.40275 Y-74.04324
G01 X175.54971 Y-73.96470
G01 X175.70915 Y-73.91631
G01 X175.87498 Y-73.89998
G01 X176.12500 Y-73.89998
G01 X176.29081 Y-73.91631
G01 X176.45027 Y-73.96470
G01 X176.59723 Y-74.04324
G01 X176.72604 Y-74.14895
G01 X176.80894 Y-74.24997
G01 X182.44104 Y-74.24997
G01 X182.52394 Y-74.14895
G01 X182.65275 Y-74.04324
G01 X182.79971 Y-73.96470
G01 X182.95917 Y-73.91631
G01 X183.12498 Y-73.89998
G01 X183.37500 Y-73.89998
G01 X183.54081 Y-73.91631
G01 X183.70027 Y-73.96470
G01 X183.84723 Y-74.04324
G01 X183.97604 Y-74.14895
G01 X184.05894 Y-74.24997
G01 X199.35287 Y-74.24997
G01 X199.81187 Y-73.79096
G01 X199.82536 Y-73.65390
G01 X199.87087 Y-73.50384
G01 X199.94481 Y-73.36554
G01 X200.04430 Y-73.24430
G01 X200.16554 Y-73.14481
G01 X200.30384 Y-73.07087
G01 X200.45390 Y-73.02536
G01 X200.60999 Y-73.00999
G01 X200.76607 Y-73.02536
G01 X200.91613 Y-73.07087
G01 X201.05444 Y-73.14481
G01 X201.17567 Y-73.24430
G01 X201.27516 Y-73.36554
G01 X201.34910 Y-73.50384
G01 X201.39462 Y-73.65390
G01 X201.40999 Y-73.80999
G01 X201.39462 Y-73.96607
G01 X201.34910 Y-74.11613
G01 X201.27516 Y-74.25444
G01 X201.17567 Y-74.37567
G01 X201.05444 Y-74.47516
G01 X200.91613 Y-74.54910
G01 X200.76607 Y-74.59462
G01 X200.60999 Y-74.60999
G01 X200.45390 Y-74.59462
G01 X200.42975 Y-74.58728
G01 X199.91352 Y-75.10353
G01 X199.83775 Y-75.16571
G01 X199.75132 Y-75.21191
G01 X199.65751 Y-75.24036
G01 X199.55998 Y-75.24999
G01 X184.05897 Y-75.24999
G01 X183.97604 Y-75.35103
G01 X183.84723 Y-75.45675
G01 X183.70027 Y-75.53528
G01 X183.54081 Y-75.58364
G01 X183.37500 Y-75.59998
G01 X183.12498 Y-75.59998
G01 X182.95917 Y-75.58364
G01 X182.79971 Y-75.53528
G01 X182.65275 Y-75.45675
G01 X182.52394 Y-75.35103
G01 X182.44101 Y-75.24999
G01 X176.80897 Y-75.24999
G01 X176.72604 Y-75.35103
G01 X176.59723 Y-75.45675
G01 X176.45027 Y-75.53528
G01 X176.29081 Y-75.58364
G01 X176.12500 Y-75.59998
G01 X175.87498 Y-75.59998
G01 X175.70915 Y-75.58364
G01 X175.54971 Y-75.53528
G01 X175.40275 Y-75.45675
G01 X175.27394 Y-75.35103
G01 X175.19101 Y-75.24999
G01 X174.07336 Y-75.24999
G01 X170.68422 Y-78.63914
G01 X170.70037 Y-78.69243
G01 X170.71000 Y-78.78999
G01 X170.70037 Y-78.88752
G01 X170.67192 Y-78.98133
G01 X170.62572 Y-79.06776
G01 X170.59999 Y-79.09911
G01 X170.59999 Y-79.38999
G01 X170.59519 Y-79.43875
G01 X170.58096 Y-79.48567
G01 X170.55785 Y-79.52887
G01 X170.52676 Y-79.56677
G01 X170.48889 Y-79.59786
G01 X170.44566 Y-79.62095
G01 X170.39877 Y-79.63517
G01 X170.34998 Y-79.64000
G01 X169.14998 Y-79.64000
G01 X169.10121 Y-79.63517
G01 X169.05432 Y-79.62095
G01 X169.01109 Y-79.59786
G01 X168.97322 Y-79.56677
G01 X168.94213 Y-79.52887
G01 X168.91902 Y-79.48567
G01 X168.90479 Y-79.43875
G01 X168.89999 Y-79.38999
G01 X168.89999 Y-81.32999
G01 X168.91632 Y-81.16415
G01 X168.96469 Y-81.00471
G01 X169.04325 Y-80.85775
G01 X169.14894 Y-80.72895
G01 X169.27774 Y-80.62323
G01 X169.42471 Y-80.54470
G01 X169.58417 Y-80.49631
G01 X169.74998 Y-80.47998
G01 X169.91581 Y-80.49631
G01 X170.07528 Y-80.54470
G01 X170.22221 Y-80.62323
G01 X170.35102 Y-80.72895
G01 X170.45673 Y-80.85775
G01 X170.53530 Y-81.00471
G01 X170.58366 Y-81.16415
G01 X170.59999 Y-81.32999
G01 X170.58366 Y-81.49582
G01 X170.53530 Y-81.65526
G01 X170.45673 Y-81.80222
G01 X170.35102 Y-81.93103
G01 X170.22221 Y-82.03674
G01 X170.07528 Y-82.11528
G01 X169.91581 Y-82.16367
G01 X169.74998 Y-82.18000
G01 X169.58417 Y-82.16367
G01 X169.42471 Y-82.11528
G01 X169.27774 Y-82.03674
G01 X169.14894 Y-81.93103
G01 X169.04325 Y-81.80222
G01 X168.96469 Y-81.65526
G01 X168.91632 Y-81.49582
G01 X168.89999 Y-81.32999
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z5.00000 ( retract )
G00 X207.62448 Y-81.55292 ( rapid move to begin. )
G01 F50.00000
( Mill infeed pass 1/1 )
G01 Z-0.04000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F100.00000
G01 X207.62448 Y-81.55292
G01 X207.62448 Y-81.30705
G01 X207.65658 Y-81.06331
G01 X207.72021 Y-80.82582
G01 X207.81429 Y-80.59870
G01 X207.93723 Y-80.38579
G01 X208.08688 Y-80.19075
G01 X208.26075 Y-80.01688
G01 X208.45577 Y-79.86723
G01 X208.66870 Y-79.74429
G01 X208.89582 Y-79.65021
G01 X209.13329 Y-79.58658
G01 X209.37703 Y-79.55448
G01 X209.62292 Y-79.55448
G01 X209.86664 Y-79.58658
G01 X210.10415 Y-79.65021
G01 X210.33128 Y-79.74429
G01 X210.54418 Y-79.86723
G01 X210.73923 Y-80.01688
G01 X210.91309 Y-80.19072
G01 X211.06275 Y-80.38577
G01 X211.18568 Y-80.59870
G01 X211.27977 Y-80.82582
G01 X211.34339 Y-81.06331
G01 X211.37550 Y-81.30705
G01 X211.37550 Y-81.55292
G01 X211.34339 Y-81.79666
G01 X211.27977 Y-82.03415
G01 X211.18568 Y-82.26128
G01 X211.06275 Y-82.47421
G01 X210.91309 Y-82.66925
G01 X210.73923 Y-82.84309
G01 X210.54421 Y-82.99275
G01 X210.33128 Y-83.11568
G01 X210.10415 Y-83.20976
G01 X209.86664 Y-83.27339
G01 X209.62292 Y-83.30550
G01 X209.37703 Y-83.30550
G01 X209.13329 Y-83.27339
G01 X208.89582 Y-83.20976
G01 X208.66870 Y-83.11568
G01 X208.45577 Y-82.99275
G01 X208.26072 Y-82.84309
G01 X208.08688 Y-82.66923
G01 X207.93723 Y-82.47418
G01 X207.81429 Y-82.26128
G01 X207.72021 Y-82.03415
G01 X207.65658 Y-81.79666
G01 X207.62448 Y-81.55292
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z5.00000 ( retract )
G00 X207.62448 Y-70.12292 ( rapid move to begin. )
G01 F50.00000
( Mill infeed pass 1/1 )
G01 Z-0.04000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F100.00000
G01 X207.62448 Y-70.12292
G01 X207.62448 Y-69.87705
G01 X207.65658 Y-69.63331
G01 X207.72021 Y-69.39582
G01 X207.81429 Y-69.16870
G01 X207.93723 Y-68.95579
G01 X208.08688 Y-68.76075
G01 X208.26075 Y-68.58688
G01 X208.45577 Y-68.43723
G01 X208.66870 Y-68.31429
G01 X208.89582 Y-68.22021
G01 X209.13329 Y-68.15658
G01 X209.37703 Y-68.12448
G01 X209.62292 Y-68.12448
G01 X209.86664 Y-68.15658
G01 X210.10415 Y-68.22021
G01 X210.33128 Y-68.31429
G01 X210.54418 Y-68.43723
G01 X210.73923 Y-68.58688
G01 X210.91309 Y-68.76072
G01 X211.06275 Y-68.95577
G01 X211.18568 Y-69.16870
G01 X211.27977 Y-69.39582
G01 X211.34339 Y-69.63331
G01 X211.37550 Y-69.87705
G01 X211.37550 Y-70.12292
G01 X211.34339 Y-70.36666
G01 X211.27977 Y-70.60415
G01 X211.18568 Y-70.83128
G01 X211.06275 Y-71.04421
G01 X210.91309 Y-71.23925
G01 X210.73923 Y-71.41309
G01 X210.54421 Y-71.56275
G01 X210.33128 Y-71.68568
G01 X210.10415 Y-71.77976
G01 X209.86664 Y-71.84339
G01 X209.62292 Y-71.87550
G01 X209.37703 Y-71.87550
G01 X209.13329 Y-71.84339
G01 X208.89582 Y-71.77976
G01 X208.66870 Y-71.68568
G01 X208.45577 Y-71.56275
G01 X208.26072 Y-71.41309
G01 X208.08688 Y-71.23923
G01 X207.93723 Y-71.04418
G01 X207.81429 Y-70.83128
G01 X207.72021 Y-70.60415
G01 X207.65658 Y-70.36666
G01 X207.62448 Y-70.12292
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z5.00000 ( retract )
G00 X223.02010 Y-69.89064 ( rapid move to begin. )
G01 F50.00000
( Mill infeed pass 1/1 )
G01 Z-0.04000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F100.00000
G01 X223.02010 Y-69.89064
G01 X223.02010 Y-69.64479
G01 X223.05221 Y-69.40105
G01 X223.11584 Y-69.16356
G01 X223.20992 Y-68.93644
G01 X223.33285 Y-68.72354
G01 X223.48251 Y-68.52849
G01 X223.65637 Y-68.35463
G01 X223.85139 Y-68.20497
G01 X224.06432 Y-68.08203
G01 X224.29145 Y-67.98795
G01 X224.52894 Y-67.92432
G01 X224.77268 Y-67.89222
G01 X225.01855 Y-67.89222
G01 X225.26229 Y-67.92432
G01 X225.49978 Y-67.98795
G01 X225.72690 Y-68.08203
G01 X225.93981 Y-68.20494
G01 X226.13485 Y-68.35463
G01 X226.30872 Y-68.52846
G01 X226.45837 Y-68.72351
G01 X226.58131 Y-68.93644
G01 X226.67539 Y-69.16356
G01 X226.73902 Y-69.40105
G01 X226.77112 Y-69.64479
G01 X226.77112 Y-69.89067
G01 X226.73902 Y-70.13440
G01 X226.67539 Y-70.37187
G01 X226.58131 Y-70.59902
G01 X226.45837 Y-70.81195
G01 X226.31370 Y-71.00049
G01 X226.13485 Y-71.18083
G01 X225.93983 Y-71.33049
G01 X225.72690 Y-71.45343
G01 X225.49978 Y-71.54751
G01 X225.26229 Y-71.61113
G01 X225.01855 Y-71.64321
G01 X224.77268 Y-71.64321
G01 X224.52894 Y-71.61113
G01 X224.29145 Y-71.54751
G01 X224.06432 Y-71.45343
G01 X223.85139 Y-71.33049
G01 X223.65635 Y-71.18083
G01 X223.48251 Y-71.00697
G01 X223.33285 Y-70.81192
G01 X223.20992 Y-70.59900
G01 X223.11584 Y-70.37187
G01 X223.05221 Y-70.13440
G01 X223.02010 Y-69.89064
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z5.00000 ( retract )
G00 X223.12450 Y-81.62293 ( rapid move to begin. )
G01 F50.00000
( Mill infeed pass 1/1 )
G01 Z-0.04000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F100.00000
G01 X223.12450 Y-81.62293
G01 X223.12450 Y-81.37705
G01 X223.15658 Y-81.13331
G01 X223.22020 Y-80.89582
G01 X223.31429 Y-80.66870
G01 X223.43722 Y-80.45580
G01 X223.58688 Y-80.26075
G01 X223.76074 Y-80.08689
G01 X223.95576 Y-79.93723
G01 X224.16869 Y-79.81429
G01 X224.39584 Y-79.72021
G01 X224.63331 Y-79.65658
G01 X224.87707 Y-79.62448
G01 X225.12292 Y-79.62448
G01 X225.36666 Y-79.65658
G01 X225.60415 Y-79.72021
G01 X225.83127 Y-79.81429
G01 X226.04418 Y-79.93720
G01 X226.23922 Y-80.08689
G01 X226.41309 Y-80.26072
G01 X226.56274 Y-80.45577
G01 X226.68568 Y-80.66870
G01 X226.77976 Y-80.89582
G01 X226.84339 Y-81.13331
G01 X226.87549 Y-81.37705
G01 X226.87549 Y-81.62293
G01 X226.84339 Y-81.86666
G01 X226.77976 Y-82.10413
G01 X226.68568 Y-82.33128
G01 X226.56274 Y-82.54421
G01 X226.41309 Y-82.73926
G01 X226.23922 Y-82.91309
G01 X226.04420 Y-83.06275
G01 X225.83127 Y-83.18569
G01 X225.60415 Y-83.27977
G01 X225.36666 Y-83.34339
G01 X225.12292 Y-83.37550
G01 X224.87707 Y-83.37550
G01 X224.63331 Y-83.34339
G01 X224.39584 Y-83.27977
G01 X224.16869 Y-83.18569
G01 X223.95576 Y-83.06275
G01 X223.76074 Y-82.91309
G01 X223.58688 Y-82.73923
G01 X223.43722 Y-82.54418
G01 X223.31429 Y-82.33128
G01 X223.22020 Y-82.10415
G01 X223.15658 Y-81.86666
G01 X223.12450 Y-81.62293
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z5.000000 ( retract )
G04 P1.000000
M9 ( Coolant off. )