busel.hvist/breakboard/gerber/pcb_back.ngc.tap

( pcb2gcode 2.5.0 )
( Software-independent Gcode )

G94 ( Millimeters per minute feed rate. )
G21 ( Units == Millimeters. )

G90 ( Absolute coordinates. )
G00 S24000 ( RPM spindle speed. )
G64 P0.01016 ( set maximum deviation from commanded toolpath )
G01 F100.00000 ( Feedrate. )


G00 Z5.00000 (Retract to tool change height)
T1
G04 P1.00000 (Wait for spindle to stop)
(MSG, Change tool bit to mill diameter 0.00000mm)
M3 ( Spindle on clockwise. )
G04 P1.00000 (Wait for spindle to get up to speed)
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z5.00000 ( retract )

G00 X-84.17999 Y-69.99999 ( rapid move to begin. )
G01 F50.00000
( Mill infeed pass 1/1 )
G01 Z-0.04000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F100.00000
G01 X-84.17999 Y-69.99999
G01 X-84.19920 Y-70.19508
G01 X-84.25612 Y-70.38266
G01 X-84.34852 Y-70.55556
G01 X-84.47288 Y-70.70710
G01 X-84.62442 Y-70.83146
G01 X-84.79732 Y-70.92386
G01 X-84.98489 Y-70.98078
G01 X-85.17999 Y-70.99998
G01 X-85.37509 Y-70.98078
G01 X-85.56267 Y-70.92386
G01 X-85.73557 Y-70.83146
G01 X-85.88710 Y-70.70710
G01 X-86.01146 Y-70.55556
G01 X-86.10387 Y-70.38266
G01 X-86.16076 Y-70.19508
G01 X-86.17999 Y-69.99999
G01 X-86.17999 Y-69.49999
G01 X-86.16076 Y-69.30489
G01 X-86.10387 Y-69.11731
G01 X-86.04115 Y-68.99999
G01 X-86.10387 Y-68.88267
G01 X-86.16076 Y-68.69509
G01 X-86.17999 Y-68.49999
G01 X-86.17999 Y-67.99999
G01 X-86.16076 Y-67.80489
G01 X-86.10387 Y-67.61731
G01 X-86.01146 Y-67.44442
G01 X-85.88710 Y-67.29288
G01 X-85.73557 Y-67.16852
G01 X-85.56267 Y-67.07612
G01 X-85.37509 Y-67.01920
G01 X-85.17999 Y-66.99999
G01 X-84.98489 Y-67.01920
G01 X-84.79732 Y-67.07612
G01 X-84.62442 Y-67.16852
G01 X-84.47288 Y-67.29288
G01 X-84.34852 Y-67.44442
G01 X-84.25612 Y-67.61731
G01 X-84.19920 Y-67.80489
G01 X-84.17999 Y-67.99999
G01 X-84.17999 Y-68.49999
G01 X-84.19920 Y-68.69509
G01 X-84.25612 Y-68.88267
G01 X-84.31881 Y-68.99999
G01 X-84.25612 Y-69.11731
G01 X-84.19920 Y-69.30489
G01 X-84.17999 Y-69.49999
G01 X-84.17999 Y-69.99999
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z5.00000 ( retract )

G00 X-79.84998 Y-68.19999 ( rapid move to begin. )
G01 F50.00000
( Mill infeed pass 1/1 )
G01 Z-0.04000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F100.00000
G01 X-79.84998 Y-68.19999
G01 X-79.87208 Y-68.42435
G01 X-79.93753 Y-68.64007
G01 X-80.04381 Y-68.83890
G01 X-80.18681 Y-69.01317
G01 X-80.36108 Y-69.15617
G01 X-80.55991 Y-69.26245
G01 X-80.77563 Y-69.32790
G01 X-80.99999 Y-69.34998
G01 X-81.22435 Y-69.32790
G01 X-81.44007 Y-69.26245
G01 X-81.63890 Y-69.15617
G01 X-81.81317 Y-69.01317
G01 X-81.95617 Y-68.83890
G01 X-82.06245 Y-68.64007
G01 X-82.12790 Y-68.42435
G01 X-82.14998 Y-68.19999
G01 X-82.12790 Y-67.97563
G01 X-82.06245 Y-67.75991
G01 X-81.95617 Y-67.56108
G01 X-81.81317 Y-67.38681
G01 X-81.63890 Y-67.24381
G01 X-81.44007 Y-67.13753
G01 X-81.22435 Y-67.07208
G01 X-80.99999 Y-67.04998
G01 X-80.77563 Y-67.07208
G01 X-80.55991 Y-67.13753
G01 X-80.36108 Y-67.24381
G01 X-80.18681 Y-67.38681
G01 X-80.04381 Y-67.56108
G01 X-79.93753 Y-67.75991
G01 X-79.87208 Y-67.97563
G01 X-79.84998 Y-68.19999
G01 X-79.84998 Y-73.89998
G01 X-79.84998 Y-72.09998
G01 X-79.85478 Y-72.05121
G01 X-79.86903 Y-72.00433
G01 X-79.89212 Y-71.96110
G01 X-79.92321 Y-71.92320
G01 X-79.96110 Y-71.89211
G01 X-80.00431 Y-71.86902
G01 X-80.05122 Y-71.85480
G01 X-80.09999 Y-71.85000
G01 X-81.89999 Y-71.85000
G01 X-81.94876 Y-71.85480
G01 X-81.99567 Y-71.86902
G01 X-82.03888 Y-71.89211
G01 X-82.07677 Y-71.92320
G01 X-82.10786 Y-71.96110
G01 X-82.13095 Y-72.00433
G01 X-82.14517 Y-72.05121
G01 X-82.14998 Y-72.09998
G01 X-82.14998 Y-73.89998
G01 X-82.14517 Y-73.94875
G01 X-82.13095 Y-73.99566
G01 X-82.10786 Y-74.03889
G01 X-82.07677 Y-74.07676
G01 X-82.03888 Y-74.10785
G01 X-81.99567 Y-74.13097
G01 X-81.94876 Y-74.14519
G01 X-81.89999 Y-74.14999
G01 X-80.09999 Y-74.14999
G01 X-80.05122 Y-74.14519
G01 X-80.00431 Y-74.13097
G01 X-79.96110 Y-74.10785
G01 X-79.92321 Y-74.07676
G01 X-79.89212 Y-74.03889
G01 X-79.86903 Y-73.99566
G01 X-79.85478 Y-73.94875
G01 X-79.84998 Y-73.89998
G01 X-79.84998 Y-78.70000
G01 X-79.84998 Y-76.90000
G01 X-79.85478 Y-76.85121
G01 X-79.86903 Y-76.80432
G01 X-79.89212 Y-76.76109
G01 X-79.92321 Y-76.72321
G01 X-79.96110 Y-76.69213
G01 X-80.00431 Y-76.66901
G01 X-80.05122 Y-76.65479
G01 X-80.09999 Y-76.64999
G01 X-81.89999 Y-76.64999
G01 X-81.94876 Y-76.65479
G01 X-81.99567 Y-76.66901
G01 X-82.03888 Y-76.69213
G01 X-82.07677 Y-76.72321
G01 X-82.10786 Y-76.76109
G01 X-82.13095 Y-76.80432
G01 X-82.14517 Y-76.85121
G01 X-82.14998 Y-76.90000
G01 X-82.14998 Y-78.70000
G01 X-82.14517 Y-78.74876
G01 X-82.13095 Y-78.79565
G01 X-82.10786 Y-78.83888
G01 X-82.07677 Y-78.87675
G01 X-82.03888 Y-78.90784
G01 X-81.99567 Y-78.93096
G01 X-81.94876 Y-78.94518
G01 X-81.89999 Y-78.94998
G01 X-80.09999 Y-78.94998
G01 X-80.05122 Y-78.94518
G01 X-80.00431 Y-78.93096
G01 X-79.96110 Y-78.90784
G01 X-79.92321 Y-78.87675
G01 X-79.89212 Y-78.83888
G01 X-79.86903 Y-78.79565
G01 X-79.85478 Y-78.74876
G01 X-79.84998 Y-78.70000
G01 X-79.84998 Y-82.59999
G01 X-79.87208 Y-82.37563
G01 X-79.93753 Y-82.15991
G01 X-80.04381 Y-81.96108
G01 X-80.18681 Y-81.78681
G01 X-80.36108 Y-81.64380
G01 X-80.55991 Y-81.53753
G01 X-80.77563 Y-81.47207
G01 X-80.99999 Y-81.44998
G01 X-81.22435 Y-81.47207
G01 X-81.44007 Y-81.53753
G01 X-81.63890 Y-81.64380
G01 X-81.81317 Y-81.78681
G01 X-81.95617 Y-81.96108
G01 X-82.06245 Y-82.15991
G01 X-82.12790 Y-82.37563
G01 X-82.14998 Y-82.59999
G01 X-82.12790 Y-82.82435
G01 X-82.06245 Y-83.04007
G01 X-81.95617 Y-83.23890
G01 X-81.81317 Y-83.41317
G01 X-81.63890 Y-83.55617
G01 X-81.44007 Y-83.66244
G01 X-81.22435 Y-83.72790
G01 X-80.99999 Y-83.75000
G01 X-80.77563 Y-83.72790
G01 X-80.55991 Y-83.66244
G01 X-80.36108 Y-83.55617
G01 X-80.18681 Y-83.41317
G01 X-80.04381 Y-83.23890
G01 X-79.93753 Y-83.04007
G01 X-79.87208 Y-82.82435
G01 X-79.84998 Y-82.59999
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z5.00000 ( retract )

G00 X-84.25000 Y-83.49999 ( rapid move to begin. )
G01 F50.00000
( Mill infeed pass 1/1 )
G01 Z-0.04000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F100.00000
G01 X-84.25000 Y-83.49999
G01 X-84.25000 Y-82.99999
G01 X-84.26920 Y-82.80489
G01 X-84.32612 Y-82.61731
G01 X-84.38881 Y-82.49999
G01 X-84.32612 Y-82.38266
G01 X-84.26920 Y-82.19509
G01 X-84.25000 Y-81.99999
G01 X-84.25000 Y-81.49999
G01 X-84.26920 Y-81.30489
G01 X-84.32612 Y-81.11731
G01 X-84.41853 Y-80.94442
G01 X-84.54288 Y-80.79288
G01 X-84.69442 Y-80.66852
G01 X-84.86729 Y-80.57612
G01 X-85.05490 Y-80.51919
G01 X-85.24999 Y-80.49999
G01 X-85.44507 Y-80.51919
G01 X-85.63267 Y-80.57612
G01 X-85.80557 Y-80.66852
G01 X-85.95711 Y-80.79288
G01 X-86.08146 Y-80.94442
G01 X-86.17387 Y-81.11731
G01 X-86.23076 Y-81.30489
G01 X-86.24999 Y-81.49999
G01 X-86.24999 Y-81.99999
G01 X-86.23076 Y-82.19509
G01 X-86.17387 Y-82.38266
G01 X-86.11116 Y-82.49999
G01 X-86.17387 Y-82.61731
G01 X-86.23076 Y-82.80489
G01 X-86.24999 Y-82.99999
G01 X-86.24999 Y-83.49999
G01 X-86.23076 Y-83.69508
G01 X-86.17387 Y-83.88266
G01 X-86.08146 Y-84.05556
G01 X-85.95711 Y-84.20710
G01 X-85.80557 Y-84.33145
G01 X-85.63267 Y-84.42386
G01 X-85.44507 Y-84.48078
G01 X-85.24999 Y-84.49998
G01 X-85.05490 Y-84.48078
G01 X-84.86729 Y-84.42386
G01 X-84.69442 Y-84.33145
G01 X-84.54288 Y-84.20710
G01 X-84.41853 Y-84.05556
G01 X-84.32612 Y-83.88266
G01 X-84.26920 Y-83.69508
G01 X-84.25000 Y-83.49999
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z5.00000 ( retract )

G00 X-112.24999 Y-83.49999 ( rapid move to begin. )
G01 F50.00000
( Mill infeed pass 1/1 )
G01 Z-0.04000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F100.00000
G01 X-112.24999 Y-83.49999
G01 X-112.24999 Y-82.99999
G01 X-112.26919 Y-82.80489
G01 X-112.32612 Y-82.61731
G01 X-112.38880 Y-82.49999
G01 X-112.32612 Y-82.38266
G01 X-112.26919 Y-82.19509
G01 X-112.24999 Y-81.99999
G01 X-112.24999 Y-81.49999
G01 X-112.26919 Y-81.30489
G01 X-112.32612 Y-81.11731
G01 X-112.41852 Y-80.94442
G01 X-112.54288 Y-80.79288
G01 X-112.69442 Y-80.66852
G01 X-112.86731 Y-80.57612
G01 X-113.05489 Y-80.51919
G01 X-113.24999 Y-80.49999
G01 X-113.44509 Y-80.51919
G01 X-113.63267 Y-80.57612
G01 X-113.80556 Y-80.66852
G01 X-113.95710 Y-80.79288
G01 X-114.08146 Y-80.94442
G01 X-114.17386 Y-81.11731
G01 X-114.23078 Y-81.30489
G01 X-114.24999 Y-81.49999
G01 X-114.24999 Y-81.99999
G01 X-114.23078 Y-82.19509
G01 X-114.17386 Y-82.38266
G01 X-114.11115 Y-82.49999
G01 X-114.17386 Y-82.61731
G01 X-114.23078 Y-82.80489
G01 X-114.24999 Y-82.99999
G01 X-114.24999 Y-83.49999
G01 X-114.23078 Y-83.69508
G01 X-114.17386 Y-83.88266
G01 X-114.08146 Y-84.05556
G01 X-113.95710 Y-84.20710
G01 X-113.80556 Y-84.33145
G01 X-113.63267 Y-84.42386
G01 X-113.44509 Y-84.48078
G01 X-113.24999 Y-84.49998
G01 X-113.05489 Y-84.48078
G01 X-112.86731 Y-84.42386
G01 X-112.69442 Y-84.33145
G01 X-112.54288 Y-84.20710
G01 X-112.41852 Y-84.05556
G01 X-112.32612 Y-83.88266
G01 X-112.26919 Y-83.69508
G01 X-112.24999 Y-83.49999
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z5.00000 ( retract )

G00 X-118.27500 Y-85.89998 ( rapid move to begin. )
G01 F50.00000
( Mill infeed pass 1/1 )
G01 Z-0.04000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F100.00000
G01 X-118.27500 Y-85.89998
G01 X-118.27500 Y-87.09998
G01 X-118.27980 Y-87.14877
G01 X-118.29402 Y-87.19566
G01 X-118.31711 Y-87.23889
G01 X-118.34820 Y-87.27676
G01 X-118.38610 Y-87.30785
G01 X-118.42933 Y-87.33097
G01 X-118.47622 Y-87.34519
G01 X-118.52499 Y-87.34999
G01 X-119.97499 Y-87.34999
G01 X-120.02376 Y-87.34519
G01 X-120.07065 Y-87.33097
G01 X-120.11388 Y-87.30785
G01 X-120.15175 Y-87.27676
G01 X-120.18284 Y-87.23889
G01 X-120.20596 Y-87.19566
G01 X-120.22018 Y-87.14877
G01 X-120.22498 Y-87.09998
G01 X-120.22498 Y-85.89998
G01 X-120.22018 Y-85.85121
G01 X-120.20596 Y-85.80432
G01 X-120.18284 Y-85.76109
G01 X-120.15175 Y-85.72322
G01 X-120.11388 Y-85.69213
G01 X-120.07065 Y-85.66902
G01 X-120.02376 Y-85.65479
G01 X-119.97499 Y-85.64999
G01 X-118.52499 Y-85.64999
G01 X-118.47622 Y-85.65479
G01 X-118.42933 Y-85.66902
G01 X-118.38610 Y-85.69213
G01 X-118.34820 Y-85.72322
G01 X-118.31711 Y-85.76109
G01 X-118.29402 Y-85.80432
G01 X-118.27980 Y-85.85121
G01 X-118.27500 Y-85.89998
G01 X-118.27500 Y-83.99998
G01 X-118.29133 Y-84.16582
G01 X-118.33969 Y-84.32526
G01 X-118.41823 Y-84.47222
G01 X-118.52394 Y-84.60102
G01 X-118.65275 Y-84.70674
G01 X-118.79971 Y-84.78528
G01 X-118.95917 Y-84.83366
G01 X-119.12498 Y-84.85000
G01 X-119.37500 Y-84.85000
G01 X-119.54081 Y-84.83366
G01 X-119.70027 Y-84.78528
G01 X-119.84723 Y-84.70674
G01 X-119.97604 Y-84.60102
G01 X-120.08173 Y-84.47222
G01 X-120.16029 Y-84.32526
G01 X-120.20865 Y-84.16582
G01 X-120.22498 Y-83.99998
G01 X-120.20865 Y-83.83417
G01 X-120.16029 Y-83.67471
G01 X-120.08173 Y-83.52775
G01 X-119.97604 Y-83.39894
G01 X-119.84723 Y-83.29323
G01 X-119.70027 Y-83.21469
G01 X-119.54081 Y-83.16633
G01 X-119.37500 Y-83.15000
G01 X-119.12498 Y-83.15000
G01 X-118.95917 Y-83.16633
G01 X-118.79971 Y-83.21469
G01 X-118.65275 Y-83.29323
G01 X-118.52394 Y-83.39894
G01 X-118.41823 Y-83.52775
G01 X-118.33969 Y-83.67471
G01 X-118.29133 Y-83.83417
G01 X-118.27500 Y-83.99998
G01 X-118.27500 Y-81.49999
G01 X-118.29133 Y-81.66583
G01 X-118.33969 Y-81.82526
G01 X-118.41823 Y-81.97223
G01 X-118.52394 Y-82.10103
G01 X-118.65275 Y-82.20674
G01 X-118.79971 Y-82.28528
G01 X-118.95917 Y-82.33364
G01 X-119.12498 Y-82.34998
G01 X-119.37500 Y-82.34998
G01 X-119.54081 Y-82.33364
G01 X-119.70027 Y-82.28528
G01 X-119.84723 Y-82.20674
G01 X-119.97604 Y-82.10103
G01 X-120.08173 Y-81.97223
G01 X-120.16029 Y-81.82526
G01 X-120.20865 Y-81.66583
G01 X-120.22498 Y-81.49999
G01 X-120.20865 Y-81.33415
G01 X-120.16029 Y-81.17472
G01 X-120.08173 Y-81.02775
G01 X-119.97604 Y-80.89895
G01 X-119.84723 Y-80.79323
G01 X-119.70027 Y-80.71470
G01 X-119.54081 Y-80.66631
G01 X-119.37500 Y-80.64998
G01 X-119.12498 Y-80.64998
G01 X-118.95917 Y-80.66631
G01 X-118.79971 Y-80.71470
G01 X-118.65275 Y-80.79323
G01 X-118.52394 Y-80.89895
G01 X-118.41823 Y-81.02775
G01 X-118.33969 Y-81.17472
G01 X-118.29133 Y-81.33415
G01 X-118.27500 Y-81.49999
G01 X-118.27500 Y-78.99999
G01 X-118.29133 Y-79.16581
G01 X-118.33969 Y-79.32527
G01 X-118.41823 Y-79.47223
G01 X-118.52394 Y-79.60103
G01 X-118.65275 Y-79.70672
G01 X-118.79971 Y-79.78529
G01 X-118.95917 Y-79.83365
G01 X-119.12498 Y-79.84998
G01 X-119.37500 Y-79.84998
G01 X-119.54081 Y-79.83365
G01 X-119.70027 Y-79.78529
G01 X-119.84723 Y-79.70672
G01 X-119.97604 Y-79.60103
G01 X-120.08173 Y-79.47223
G01 X-120.16029 Y-79.32527
G01 X-120.20865 Y-79.16581
G01 X-120.22498 Y-78.99999
G01 X-120.20865 Y-78.83416
G01 X-120.16029 Y-78.67470
G01 X-120.08173 Y-78.52776
G01 X-119.97604 Y-78.39895
G01 X-119.84723 Y-78.29324
G01 X-119.70027 Y-78.21468
G01 X-119.54081 Y-78.16632
G01 X-119.37500 Y-78.14998
G01 X-119.12498 Y-78.14998
G01 X-118.95917 Y-78.16632
G01 X-118.79971 Y-78.21468
G01 X-118.65275 Y-78.29324
G01 X-118.52394 Y-78.39895
G01 X-118.41823 Y-78.52776
G01 X-118.33969 Y-78.67470
G01 X-118.29133 Y-78.83416
G01 X-118.27500 Y-78.99999
G01 X-118.27500 Y-76.50000
G01 X-118.29133 Y-76.33416
G01 X-118.33969 Y-76.17470
G01 X-118.41823 Y-76.02776
G01 X-118.52394 Y-75.89896
G01 X-118.65275 Y-75.79324
G01 X-118.79971 Y-75.71468
G01 X-118.95917 Y-75.66632
G01 X-119.12498 Y-75.64999
G01 X-119.37500 Y-75.64999
G01 X-119.54081 Y-75.66632
G01 X-119.70027 Y-75.71468
G01 X-119.84723 Y-75.79324
G01 X-119.97604 Y-75.89896
G01 X-120.08173 Y-76.02776
G01 X-120.16029 Y-76.17470
G01 X-120.20865 Y-76.33416
G01 X-120.22498 Y-76.50000
G01 X-120.20865 Y-76.66581
G01 X-120.16029 Y-76.82527
G01 X-120.08173 Y-76.97221
G01 X-119.97604 Y-77.10104
G01 X-119.84723 Y-77.20673
G01 X-119.70027 Y-77.28529
G01 X-119.54081 Y-77.33365
G01 X-119.37500 Y-77.34999
G01 X-119.12498 Y-77.34999
G01 X-118.95917 Y-77.33365
G01 X-118.79971 Y-77.28529
G01 X-118.65275 Y-77.20673
G01 X-118.52394 Y-77.10104
G01 X-118.41823 Y-76.97221
G01 X-118.33969 Y-76.82527
G01 X-118.29133 Y-76.66581
G01 X-118.27500 Y-76.50000
G01 X-119.27500 Y-67.99999
G01 X-119.29133 Y-67.83415
G01 X-119.33969 Y-67.67472
G01 X-119.41823 Y-67.52775
G01 X-119.52394 Y-67.39895
G01 X-119.65275 Y-67.29324
G01 X-119.79971 Y-67.21470
G01 X-119.95917 Y-67.16631
G01 X-120.12498 Y-67.14998
G01 X-120.37499 Y-67.14998
G01 X-120.54081 Y-67.16631
G01 X-120.70027 Y-67.21470
G01 X-120.84723 Y-67.29324
G01 X-120.97603 Y-67.39895
G01 X-121.08172 Y-67.52775
G01 X-121.16029 Y-67.67472
G01 X-121.20865 Y-67.83415
G01 X-121.22498 Y-67.99999
G01 X-121.20865 Y-68.16580
G01 X-121.16029 Y-68.32526
G01 X-121.08172 Y-68.47223
G01 X-120.97603 Y-68.60103
G01 X-120.84723 Y-68.70675
G01 X-120.70027 Y-68.78528
G01 X-120.54081 Y-68.83364
G01 X-120.37499 Y-68.84998
G01 X-120.12498 Y-68.84998
G01 X-119.95917 Y-68.83364
G01 X-119.79971 Y-68.78528
G01 X-119.65275 Y-68.70675
G01 X-119.52394 Y-68.60103
G01 X-119.41823 Y-68.47223
G01 X-119.33969 Y-68.32526
G01 X-119.29133 Y-68.16580
G01 X-119.27500 Y-67.99999
G01 X-119.27500 Y-64.90000
G01 X-119.27980 Y-64.85120
G01 X-119.29402 Y-64.80432
G01 X-119.31711 Y-64.76108
G01 X-119.34820 Y-64.72321
G01 X-119.38610 Y-64.69212
G01 X-119.42933 Y-64.66901
G01 X-119.47622 Y-64.65479
G01 X-119.52498 Y-64.64999
G01 X-120.97499 Y-64.64999
G01 X-121.02376 Y-64.65479
G01 X-121.07065 Y-64.66901
G01 X-121.11388 Y-64.69212
G01 X-121.15175 Y-64.72321
G01 X-121.18287 Y-64.76108
G01 X-121.20596 Y-64.80432
G01 X-121.22018 Y-64.85120
G01 X-121.22498 Y-64.90000
G01 X-121.22498 Y-66.09999
G01 X-121.22018 Y-66.14876
G01 X-121.20596 Y-66.19565
G01 X-121.18287 Y-66.23888
G01 X-121.15175 Y-66.27675
G01 X-121.11388 Y-66.30784
G01 X-121.07065 Y-66.33096
G01 X-121.02376 Y-66.34518
G01 X-120.97499 Y-66.34998
G01 X-119.52498 Y-66.34998
G01 X-119.47622 Y-66.34518
G01 X-119.42933 Y-66.33096
G01 X-119.38610 Y-66.30784
G01 X-119.34820 Y-66.27675
G01 X-119.31711 Y-66.23888
G01 X-119.29402 Y-66.19565
G01 X-119.27980 Y-66.14876
G01 X-119.27500 Y-66.09999
G01 X-119.27500 Y-70.49999
G01 X-119.29133 Y-70.66582
G01 X-119.33969 Y-70.82526
G01 X-119.41823 Y-70.97222
G01 X-119.52394 Y-71.10103
G01 X-119.65275 Y-71.20674
G01 X-119.79971 Y-71.28528
G01 X-119.95917 Y-71.33366
G01 X-120.12498 Y-71.35000
G01 X-120.37499 Y-71.35000
G01 X-120.54081 Y-71.33366
G01 X-120.70027 Y-71.28528
G01 X-120.84723 Y-71.20674
G01 X-120.97603 Y-71.10103
G01 X-121.08172 Y-70.97222
G01 X-121.16029 Y-70.82526
G01 X-121.20865 Y-70.66582
G01 X-121.22498 Y-70.49999
G01 X-121.20865 Y-70.33415
G01 X-121.16029 Y-70.17471
G01 X-121.08172 Y-70.02775
G01 X-120.97603 Y-69.89895
G01 X-120.84723 Y-69.79323
G01 X-120.70027 Y-69.71469
G01 X-120.54081 Y-69.66631
G01 X-120.37499 Y-69.64997
G01 X-120.12498 Y-69.64997
G01 X-119.95917 Y-69.66631
G01 X-119.79971 Y-69.71469
G01 X-119.65275 Y-69.79323
G01 X-119.52394 Y-69.89895
G01 X-119.41823 Y-70.02775
G01 X-119.33969 Y-70.17471
G01 X-119.29133 Y-70.33415
G01 X-119.27500 Y-70.49999
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z5.00000 ( retract )

G00 X-126.27498 Y-73.24999 ( rapid move to begin. )
G01 F50.00000
( Mill infeed pass 1/1 )
G01 Z-0.04000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F100.00000
G01 X-126.27498 Y-73.24999
G01 X-126.29131 Y-73.41580
G01 X-126.33970 Y-73.57527
G01 X-126.41824 Y-73.72223
G01 X-126.52395 Y-73.85103
G01 X-126.65276 Y-73.95675
G01 X-126.79970 Y-74.03529
G01 X-126.95916 Y-74.08365
G01 X-127.12499 Y-74.09998
G01 X-127.37498 Y-74.09998
G01 X-127.54082 Y-74.08365
G01 X-127.70028 Y-74.03529
G01 X-127.84722 Y-73.95675
G01 X-127.97602 Y-73.85103
G01 X-128.08174 Y-73.72223
G01 X-128.16030 Y-73.57527
G01 X-128.20866 Y-73.41580
G01 X-128.22499 Y-73.24999
G01 X-128.20866 Y-73.08416
G01 X-128.16030 Y-72.92470
G01 X-128.08174 Y-72.77776
G01 X-127.97602 Y-72.64895
G01 X-127.84722 Y-72.54324
G01 X-127.70028 Y-72.46470
G01 X-127.54082 Y-72.41631
G01 X-127.37498 Y-72.39998
G01 X-127.12499 Y-72.39998
G01 X-126.95916 Y-72.41631
G01 X-126.79970 Y-72.46470
G01 X-126.65276 Y-72.54324
G01 X-126.52395 Y-72.64895
G01 X-126.41824 Y-72.77776
G01 X-126.33970 Y-72.92470
G01 X-126.29131 Y-73.08416
G01 X-126.27498 Y-73.24999
G01 X-126.27498 Y-70.75000
G01 X-126.29131 Y-70.91581
G01 X-126.33970 Y-71.07527
G01 X-126.41824 Y-71.22221
G01 X-126.52395 Y-71.35104
G01 X-126.65276 Y-71.45673
G01 X-126.79970 Y-71.53529
G01 X-126.95916 Y-71.58365
G01 X-127.12499 Y-71.59998
G01 X-127.37498 Y-71.59998
G01 X-127.54082 Y-71.58365
G01 X-127.70028 Y-71.53529
G01 X-127.84722 Y-71.45673
G01 X-127.97602 Y-71.35104
G01 X-128.08174 Y-71.22221
G01 X-128.16030 Y-71.07527
G01 X-128.20866 Y-70.91581
G01 X-128.22499 Y-70.75000
G01 X-128.20866 Y-70.58416
G01 X-128.16030 Y-70.42470
G01 X-128.08174 Y-70.27776
G01 X-127.97602 Y-70.14896
G01 X-127.84722 Y-70.04324
G01 X-127.70028 Y-69.96468
G01 X-127.54082 Y-69.91632
G01 X-127.37498 Y-69.89999
G01 X-127.12499 Y-69.89999
G01 X-126.95916 Y-69.91632
G01 X-126.79970 Y-69.96468
G01 X-126.65276 Y-70.04324
G01 X-126.52395 Y-70.14896
G01 X-126.41824 Y-70.27776
G01 X-126.33970 Y-70.42470
G01 X-126.29131 Y-70.58416
G01 X-126.27498 Y-70.75000
G01 X-126.27498 Y-68.24998
G01 X-126.29131 Y-68.41581
G01 X-126.33970 Y-68.57528
G01 X-126.41824 Y-68.72221
G01 X-126.52395 Y-68.85102
G01 X-126.65276 Y-68.95673
G01 X-126.79970 Y-69.03530
G01 X-126.95916 Y-69.08366
G01 X-127.12499 Y-69.09999
G01 X-127.37498 Y-69.09999
G01 X-127.54082 Y-69.08366
G01 X-127.70028 Y-69.03530
G01 X-127.84722 Y-68.95673
G01 X-127.97602 Y-68.85102
G01 X-128.08174 Y-68.72221
G01 X-128.16030 Y-68.57528
G01 X-128.20866 Y-68.41581
G01 X-128.22499 Y-68.24998
G01 X-128.20866 Y-68.08417
G01 X-128.16030 Y-67.92471
G01 X-128.08174 Y-67.77774
G01 X-127.97602 Y-67.64894
G01 X-127.84722 Y-67.54325
G01 X-127.70028 Y-67.46469
G01 X-127.54082 Y-67.41632
G01 X-127.37498 Y-67.39999
G01 X-127.12499 Y-67.39999
G01 X-126.95916 Y-67.41632
G01 X-126.79970 Y-67.46469
G01 X-126.65276 Y-67.54325
G01 X-126.52395 Y-67.64894
G01 X-126.41824 Y-67.77774
G01 X-126.33970 Y-67.92471
G01 X-126.29131 Y-68.08417
G01 X-126.27498 Y-68.24998
G01 X-126.27498 Y-65.14998
G01 X-126.27978 Y-65.10122
G01 X-126.29401 Y-65.05433
G01 X-126.31712 Y-65.01110
G01 X-126.34821 Y-64.97320
G01 X-126.38611 Y-64.94211
G01 X-126.42931 Y-64.91902
G01 X-126.47623 Y-64.90480
G01 X-126.52499 Y-64.90000
G01 X-127.97498 Y-64.90000
G01 X-128.02377 Y-64.90480
G01 X-128.07066 Y-64.91902
G01 X-128.11389 Y-64.94211
G01 X-128.15176 Y-64.97320
G01 X-128.18285 Y-65.01110
G01 X-128.20597 Y-65.05433
G01 X-128.22019 Y-65.10122
G01 X-128.22499 Y-65.14998
G01 X-128.22499 Y-66.34998
G01 X-128.22019 Y-66.39875
G01 X-128.20597 Y-66.44566
G01 X-128.18285 Y-66.48887
G01 X-128.15176 Y-66.52677
G01 X-128.11389 Y-66.55786
G01 X-128.07066 Y-66.58097
G01 X-128.02377 Y-66.59519
G01 X-127.97498 Y-66.59999
G01 X-126.52499 Y-66.59999
G01 X-126.47623 Y-66.59519
G01 X-126.42931 Y-66.58097
G01 X-126.38611 Y-66.55786
G01 X-126.34821 Y-66.52677
G01 X-126.31712 Y-66.48887
G01 X-126.29401 Y-66.44566
G01 X-126.27978 Y-66.39875
G01 X-126.27498 Y-66.34998
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z5.00000 ( retract )

G00 X-134.15000 Y-67.59999 ( rapid move to begin. )
G01 F50.00000
( Mill infeed pass 1/1 )
G01 Z-0.04000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F100.00000
G01 X-134.15000 Y-67.59999
G01 X-134.15000 Y-65.90000
G01 X-135.84999 Y-65.90000
G01 X-135.84999 Y-67.59999
G01 X-134.15000 Y-67.59999
G01 X-134.15000 Y-69.28998
G01 X-134.16633 Y-69.45582
G01 X-134.21469 Y-69.61528
G01 X-134.29323 Y-69.76222
G01 X-134.39894 Y-69.89102
G01 X-134.52775 Y-69.99674
G01 X-134.67471 Y-70.07527
G01 X-134.83417 Y-70.12366
G01 X-134.99998 Y-70.13999
G01 X-135.16582 Y-70.12366
G01 X-135.32526 Y-70.07527
G01 X-135.47222 Y-69.99674
G01 X-135.60102 Y-69.89102
G01 X-135.70674 Y-69.76222
G01 X-135.78528 Y-69.61528
G01 X-135.83366 Y-69.45582
G01 X-135.84999 Y-69.28998
G01 X-135.83366 Y-69.12417
G01 X-135.78528 Y-68.96471
G01 X-135.70674 Y-68.81774
G01 X-135.60102 Y-68.68894
G01 X-135.47222 Y-68.58323
G01 X-135.32526 Y-68.50469
G01 X-135.16582 Y-68.45633
G01 X-134.99998 Y-68.44000
G01 X-134.83417 Y-68.45633
G01 X-134.67471 Y-68.50469
G01 X-134.52775 Y-68.58323
G01 X-134.39894 Y-68.68894
G01 X-134.29323 Y-68.81774
G01 X-134.21469 Y-68.96471
G01 X-134.16633 Y-69.12417
G01 X-134.15000 Y-69.28998
G01 X-134.15000 Y-71.82998
G01 X-134.16633 Y-71.99582
G01 X-134.21469 Y-72.15528
G01 X-134.29323 Y-72.30222
G01 X-134.39894 Y-72.43102
G01 X-134.52775 Y-72.53674
G01 X-134.67471 Y-72.61527
G01 X-134.83417 Y-72.66366
G01 X-134.99998 Y-72.67999
G01 X-135.16582 Y-72.66366
G01 X-135.32526 Y-72.61527
G01 X-135.47222 Y-72.53674
G01 X-135.60102 Y-72.43102
G01 X-135.70674 Y-72.30222
G01 X-135.78528 Y-72.15528
G01 X-135.83366 Y-71.99582
G01 X-135.84999 Y-71.82998
G01 X-135.83366 Y-71.66417
G01 X-135.78528 Y-71.50471
G01 X-135.70674 Y-71.35774
G01 X-135.60102 Y-71.22894
G01 X-135.47222 Y-71.12323
G01 X-135.32526 Y-71.04469
G01 X-135.16582 Y-70.99633
G01 X-134.99998 Y-70.98000
G01 X-134.83417 Y-70.99633
G01 X-134.67471 Y-71.04469
G01 X-134.52775 Y-71.12323
G01 X-134.39894 Y-71.22894
G01 X-134.29323 Y-71.35774
G01 X-134.21469 Y-71.50471
G01 X-134.16633 Y-71.66417
G01 X-134.15000 Y-71.82998
G01 X-134.09999 Y-76.24999
G01 X-134.11632 Y-76.41582
G01 X-134.16468 Y-76.57526
G01 X-134.24324 Y-76.72222
G01 X-134.34896 Y-76.85103
G01 X-134.47776 Y-76.95674
G01 X-134.62470 Y-77.03528
G01 X-134.78416 Y-77.08367
G01 X-134.95000 Y-77.10000
G01 X-135.11581 Y-77.08367
G01 X-135.27527 Y-77.03528
G01 X-135.42223 Y-76.95674
G01 X-135.55104 Y-76.85103
G01 X-135.65673 Y-76.72222
G01 X-135.73529 Y-76.57526
G01 X-135.78365 Y-76.41582
G01 X-135.79998 Y-76.24999
G01 X-135.78365 Y-76.08415
G01 X-135.73529 Y-75.92471
G01 X-135.65673 Y-75.77775
G01 X-135.55104 Y-75.64895
G01 X-135.42223 Y-75.54323
G01 X-135.27527 Y-75.46470
G01 X-135.11581 Y-75.41631
G01 X-134.95000 Y-75.39998
G01 X-134.78416 Y-75.41631
G01 X-134.62470 Y-75.46470
G01 X-134.47776 Y-75.54323
G01 X-134.34896 Y-75.64895
G01 X-134.24324 Y-75.77775
G01 X-134.16468 Y-75.92471
G01 X-134.11632 Y-76.08415
G01 X-134.09999 Y-76.24999
G01 X-134.09999 Y-78.78999
G01 X-134.11632 Y-78.95582
G01 X-134.16468 Y-79.11526
G01 X-134.24324 Y-79.26222
G01 X-134.34896 Y-79.39103
G01 X-134.47776 Y-79.49674
G01 X-134.62470 Y-79.57528
G01 X-134.78416 Y-79.62367
G01 X-134.95000 Y-79.64000
G01 X-135.11581 Y-79.62367
G01 X-135.27527 Y-79.57528
G01 X-135.42223 Y-79.49674
G01 X-135.55104 Y-79.39103
G01 X-135.65673 Y-79.26222
G01 X-135.73529 Y-79.11526
G01 X-135.78365 Y-78.95582
G01 X-135.79998 Y-78.78999
G01 X-135.78365 Y-78.62415
G01 X-135.73529 Y-78.46471
G01 X-135.65673 Y-78.31775
G01 X-135.55104 Y-78.18895
G01 X-135.42223 Y-78.08323
G01 X-135.27527 Y-78.00470
G01 X-135.11581 Y-77.95631
G01 X-134.95000 Y-77.93998
G01 X-134.78416 Y-77.95631
G01 X-134.62470 Y-78.00470
G01 X-134.47776 Y-78.08323
G01 X-134.34896 Y-78.18895
G01 X-134.24324 Y-78.31775
G01 X-134.16468 Y-78.46471
G01 X-134.11632 Y-78.62415
G01 X-134.09999 Y-78.78999
G01 X-134.09999 Y-80.47998
G01 X-135.79998 Y-80.47998
G01 X-135.79998 Y-82.18000
G01 X-135.79998 Y-80.47998
G01 X-134.09999 Y-80.47998
G01 X-134.09999 Y-82.18000
G01 X-140.80000 Y-82.18000
G01 X-140.80000 Y-80.47998
G01 X-139.09998 Y-80.47998
G01 X-139.09998 Y-82.18000
G01 X-139.09998 Y-78.78999
G01 X-139.11631 Y-78.95582
G01 X-139.16469 Y-79.11526
G01 X-139.24323 Y-79.26222
G01 X-139.34895 Y-79.39103
G01 X-139.47775 Y-79.49674
G01 X-139.62471 Y-79.57528
G01 X-139.78415 Y-79.62367
G01 X-139.94999 Y-79.64000
G01 X-140.11582 Y-79.62367
G01 X-140.27526 Y-79.57528
G01 X-140.42222 Y-79.49674
G01 X-140.55103 Y-79.39103
G01 X-140.65674 Y-79.26222
G01 X-140.73528 Y-79.11526
G01 X-140.78367 Y-78.95582
G01 X-140.80000 Y-78.78999
G01 X-140.78367 Y-78.62415
G01 X-140.73528 Y-78.46471
G01 X-140.65674 Y-78.31775
G01 X-140.55103 Y-78.18895
G01 X-140.42222 Y-78.08323
G01 X-140.27526 Y-78.00470
G01 X-140.11582 Y-77.95631
G01 X-139.94999 Y-77.93998
G01 X-139.78415 Y-77.95631
G01 X-139.62471 Y-78.00470
G01 X-139.47775 Y-78.08323
G01 X-139.34895 Y-78.18895
G01 X-139.24323 Y-78.31775
G01 X-139.16469 Y-78.46471
G01 X-139.11631 Y-78.62415
G01 X-139.09998 Y-78.78999
G01 X-139.09998 Y-76.24999
G01 X-139.11631 Y-76.41582
G01 X-139.16469 Y-76.57526
G01 X-139.24323 Y-76.72222
G01 X-139.34895 Y-76.85103
G01 X-139.47775 Y-76.95674
G01 X-139.62471 Y-77.03528
G01 X-139.78415 Y-77.08367
G01 X-139.94999 Y-77.10000
G01 X-140.11582 Y-77.08367
G01 X-140.27526 Y-77.03528
G01 X-140.42222 Y-76.95674
G01 X-140.55103 Y-76.85103
G01 X-140.65674 Y-76.72222
G01 X-140.73528 Y-76.57526
G01 X-140.78367 Y-76.41582
G01 X-140.80000 Y-76.24999
G01 X-140.78367 Y-76.08415
G01 X-140.73528 Y-75.92471
G01 X-140.65674 Y-75.77775
G01 X-140.55103 Y-75.64895
G01 X-140.42222 Y-75.54323
G01 X-140.27526 Y-75.46470
G01 X-140.11582 Y-75.41631
G01 X-139.94999 Y-75.39998
G01 X-139.78415 Y-75.41631
G01 X-139.62471 Y-75.46470
G01 X-139.47775 Y-75.54323
G01 X-139.34895 Y-75.64895
G01 X-139.24323 Y-75.77775
G01 X-139.16469 Y-75.92471
G01 X-139.11631 Y-76.08415
G01 X-139.09998 Y-76.24999
G01 X-139.14999 Y-71.82998
G01 X-139.16632 Y-71.99582
G01 X-139.21468 Y-72.15528
G01 X-139.29324 Y-72.30222
G01 X-139.39896 Y-72.43102
G01 X-139.52776 Y-72.53674
G01 X-139.67470 Y-72.61527
G01 X-139.83416 Y-72.66366
G01 X-140.00000 Y-72.67999
G01 X-140.16581 Y-72.66366
G01 X-140.32527 Y-72.61527
G01 X-140.47221 Y-72.53674
G01 X-140.60104 Y-72.43102
G01 X-140.70673 Y-72.30222
G01 X-140.78529 Y-72.15528
G01 X-140.83365 Y-71.99582
G01 X-140.84999 Y-71.82998
G01 X-140.83365 Y-71.66417
G01 X-140.78529 Y-71.50471
G01 X-140.70673 Y-71.35774
G01 X-140.60104 Y-71.22894
G01 X-140.47221 Y-71.12323
G01 X-140.32527 Y-71.04469
G01 X-140.16581 Y-70.99633
G01 X-140.00000 Y-70.98000
G01 X-139.83416 Y-70.99633
G01 X-139.67470 Y-71.04469
G01 X-139.52776 Y-71.12323
G01 X-139.39896 Y-71.22894
G01 X-139.29324 Y-71.35774
G01 X-139.21468 Y-71.50471
G01 X-139.16632 Y-71.66417
G01 X-139.14999 Y-71.82998
G01 X-139.14999 Y-69.28998
G01 X-139.16632 Y-69.45582
G01 X-139.21468 Y-69.61528
G01 X-139.29324 Y-69.76222
G01 X-139.39896 Y-69.89102
G01 X-139.52776 Y-69.99674
G01 X-139.67470 Y-70.07527
G01 X-139.83416 Y-70.12366
G01 X-140.00000 Y-70.13999
G01 X-140.16581 Y-70.12366
G01 X-140.32527 Y-70.07527
G01 X-140.47221 Y-69.99674
G01 X-140.60104 Y-69.89102
G01 X-140.70673 Y-69.76222
G01 X-140.78529 Y-69.61528
G01 X-140.83365 Y-69.45582
G01 X-140.84999 Y-69.28998
G01 X-140.83365 Y-69.12417
G01 X-140.78529 Y-68.96471
G01 X-140.70673 Y-68.81774
G01 X-140.60104 Y-68.68894
G01 X-140.47221 Y-68.58323
G01 X-140.32527 Y-68.50469
G01 X-140.16581 Y-68.45633
G01 X-140.00000 Y-68.44000
G01 X-139.83416 Y-68.45633
G01 X-139.67470 Y-68.50469
G01 X-139.52776 Y-68.58323
G01 X-139.39896 Y-68.68894
G01 X-139.29324 Y-68.81774
G01 X-139.21468 Y-68.96471
G01 X-139.16632 Y-69.12417
G01 X-139.14999 Y-69.28998
G01 X-139.14999 Y-65.90000
G01 X-140.84999 Y-65.90000
G01 X-140.84999 Y-67.59999
G01 X-139.14999 Y-67.59999
G01 X-146.89999 Y-69.48000
G01 X-154.64998 Y-71.82998
G01 X-154.64998 Y-69.28998
G01 X-154.66631 Y-69.45582
G01 X-154.71470 Y-69.61528
G01 X-154.79324 Y-69.76222
G01 X-154.89895 Y-69.89102
G01 X-155.02776 Y-69.99674
G01 X-155.17470 Y-70.07527
G01 X-155.33416 Y-70.12366
G01 X-155.49999 Y-70.13999
G01 X-155.66580 Y-70.12366
G01 X-155.82527 Y-70.07527
G01 X-155.97223 Y-69.99674
G01 X-156.10103 Y-69.89102
G01 X-156.20675 Y-69.76222
G01 X-156.28529 Y-69.61528
G01 X-156.33365 Y-69.45582
G01 X-156.34998 Y-69.28998
G01 X-156.33365 Y-69.12417
G01 X-156.28529 Y-68.96471
G01 X-156.20675 Y-68.81774
G01 X-156.10103 Y-68.68894
G01 X-155.97223 Y-68.58323
G01 X-155.82527 Y-68.50469
G01 X-155.66580 Y-68.45633
G01 X-155.49999 Y-68.44000
G01 X-155.33416 Y-68.45633
G01 X-155.17470 Y-68.50469
G01 X-155.02776 Y-68.58323
G01 X-154.89895 Y-68.68894
G01 X-154.79324 Y-68.81774
G01 X-154.71470 Y-68.96471
G01 X-154.66631 Y-69.12417
G01 X-154.64998 Y-69.28998
G01 X-154.64998 Y-65.90000
G01 X-156.34998 Y-65.90000
G01 X-156.34998 Y-67.59999
G01 X-154.64998 Y-67.59999
G01 X-154.64998 Y-71.82998
G01 X-154.66631 Y-71.99582
G01 X-154.71470 Y-72.15528
G01 X-154.79324 Y-72.30222
G01 X-154.89895 Y-72.43102
G01 X-155.02776 Y-72.53674
G01 X-155.17470 Y-72.61527
G01 X-155.33416 Y-72.66366
G01 X-155.49999 Y-72.67999
G01 X-155.66580 Y-72.66366
G01 X-155.82527 Y-72.61527
G01 X-155.97223 Y-72.53674
G01 X-156.10103 Y-72.43102
G01 X-156.20675 Y-72.30222
G01 X-156.28529 Y-72.15528
G01 X-156.33365 Y-71.99582
G01 X-156.34998 Y-71.82998
G01 X-156.33365 Y-71.66417
G01 X-156.28529 Y-71.50471
G01 X-156.20675 Y-71.35774
G01 X-156.10103 Y-71.22894
G01 X-155.97223 Y-71.12323
G01 X-155.82527 Y-71.04469
G01 X-155.66580 Y-70.99633
G01 X-155.49999 Y-70.98000
G01 X-155.33416 Y-70.99633
G01 X-155.17470 Y-71.04469
G01 X-155.02776 Y-71.12323
G01 X-154.89895 Y-71.22894
G01 X-154.79324 Y-71.35774
G01 X-154.71470 Y-71.50471
G01 X-154.66631 Y-71.66417
G01 X-154.64998 Y-71.82998
G01 X-154.64998 Y-76.24999
G01 X-154.66631 Y-76.41582
G01 X-154.71470 Y-76.57526
G01 X-154.79324 Y-76.72222
G01 X-154.89895 Y-76.85103
G01 X-155.02776 Y-76.95674
G01 X-155.17470 Y-77.03528
G01 X-155.33416 Y-77.08367
G01 X-155.49999 Y-77.10000
G01 X-155.66580 Y-77.08367
G01 X-155.82527 Y-77.03528
G01 X-155.97223 Y-76.95674
G01 X-156.10103 Y-76.85103
G01 X-156.20675 Y-76.72222
G01 X-156.28529 Y-76.57526
G01 X-156.33365 Y-76.41582
G01 X-156.34998 Y-76.24999
G01 X-156.33365 Y-76.08415
G01 X-156.28529 Y-75.92471
G01 X-156.20675 Y-75.77775
G01 X-156.10103 Y-75.64895
G01 X-155.97223 Y-75.54323
G01 X-155.82527 Y-75.46470
G01 X-155.66580 Y-75.41631
G01 X-155.49999 Y-75.39998
G01 X-155.33416 Y-75.41631
G01 X-155.17470 Y-75.46470
G01 X-155.02776 Y-75.54323
G01 X-154.89895 Y-75.64895
G01 X-154.79324 Y-75.77775
G01 X-154.71470 Y-75.92471
G01 X-154.66631 Y-76.08415
G01 X-154.64998 Y-76.24999
G01 X-154.64998 Y-78.78999
G01 X-154.66631 Y-78.95582
G01 X-154.71470 Y-79.11526
G01 X-154.79324 Y-79.26222
G01 X-154.89895 Y-79.39103
G01 X-155.02776 Y-79.49674
G01 X-155.17470 Y-79.57528
G01 X-155.33416 Y-79.62367
G01 X-155.49999 Y-79.64000
G01 X-155.66580 Y-79.62367
G01 X-155.82527 Y-79.57528
G01 X-155.97223 Y-79.49674
G01 X-156.10103 Y-79.39103
G01 X-156.20675 Y-79.26222
G01 X-156.28529 Y-79.11526
G01 X-156.33365 Y-78.95582
G01 X-156.34998 Y-78.78999
G01 X-156.33365 Y-78.62415
G01 X-156.28529 Y-78.46471
G01 X-156.20675 Y-78.31775
G01 X-156.10103 Y-78.18895
G01 X-155.97223 Y-78.08323
G01 X-155.82527 Y-78.00470
G01 X-155.66580 Y-77.95631
G01 X-155.49999 Y-77.93998
G01 X-155.33416 Y-77.95631
G01 X-155.17470 Y-78.00470
G01 X-155.02776 Y-78.08323
G01 X-154.89895 Y-78.18895
G01 X-154.79324 Y-78.31775
G01 X-154.71470 Y-78.46471
G01 X-154.66631 Y-78.62415
G01 X-154.64998 Y-78.78999
G01 X-154.64998 Y-80.47998
G01 X-156.34998 Y-80.47998
G01 X-156.34998 Y-82.18000
G01 X-156.34998 Y-80.47998
G01 X-154.64998 Y-80.47998
G01 X-154.64998 Y-82.18000
G01 X-161.34999 Y-82.18000
G01 X-161.34999 Y-80.47998
G01 X-159.65000 Y-80.47998
G01 X-159.65000 Y-82.18000
G01 X-159.65000 Y-78.78999
G01 X-159.66633 Y-78.95582
G01 X-159.71469 Y-79.11526
G01 X-159.79323 Y-79.26222
G01 X-159.89894 Y-79.39103
G01 X-160.02775 Y-79.49674
G01 X-160.17471 Y-79.57528
G01 X-160.33417 Y-79.62367
G01 X-160.49998 Y-79.64000
G01 X-160.66582 Y-79.62367
G01 X-160.82526 Y-79.57528
G01 X-160.97222 Y-79.49674
G01 X-161.10102 Y-79.39103
G01 X-161.20674 Y-79.26222
G01 X-161.28528 Y-79.11526
G01 X-161.33366 Y-78.95582
G01 X-161.34999 Y-78.78999
G01 X-161.33366 Y-78.62415
G01 X-161.28528 Y-78.46471
G01 X-161.20674 Y-78.31775
G01 X-161.10102 Y-78.18895
G01 X-160.97222 Y-78.08323
G01 X-160.82526 Y-78.00470
G01 X-160.66582 Y-77.95631
G01 X-160.49998 Y-77.93998
G01 X-160.33417 Y-77.95631
G01 X-160.17471 Y-78.00470
G01 X-160.02775 Y-78.08323
G01 X-159.89894 Y-78.18895
G01 X-159.79323 Y-78.31775
G01 X-159.71469 Y-78.46471
G01 X-159.66633 Y-78.62415
G01 X-159.65000 Y-78.78999
G01 X-159.65000 Y-76.24999
G01 X-159.66633 Y-76.41582
G01 X-159.71469 Y-76.57526
G01 X-159.79323 Y-76.72222
G01 X-159.89894 Y-76.85103
G01 X-160.02775 Y-76.95674
G01 X-160.17471 Y-77.03528
G01 X-160.33417 Y-77.08367
G01 X-160.49998 Y-77.10000
G01 X-160.66582 Y-77.08367
G01 X-160.82526 Y-77.03528
G01 X-160.97222 Y-76.95674
G01 X-161.10102 Y-76.85103
G01 X-161.20674 Y-76.72222
G01 X-161.28528 Y-76.57526
G01 X-161.33366 Y-76.41582
G01 X-161.34999 Y-76.24999
G01 X-161.33366 Y-76.08415
G01 X-161.28528 Y-75.92471
G01 X-161.20674 Y-75.77775
G01 X-161.10102 Y-75.64895
G01 X-160.97222 Y-75.54323
G01 X-160.82526 Y-75.46470
G01 X-160.66582 Y-75.41631
G01 X-160.49998 Y-75.39998
G01 X-160.33417 Y-75.41631
G01 X-160.17471 Y-75.46470
G01 X-160.02775 Y-75.54323
G01 X-159.89894 Y-75.64895
G01 X-159.79323 Y-75.77775
G01 X-159.71469 Y-75.92471
G01 X-159.66633 Y-76.08415
G01 X-159.65000 Y-76.24999
G01 X-159.65000 Y-71.82998
G01 X-159.66633 Y-71.99582
G01 X-159.71469 Y-72.15528
G01 X-159.79323 Y-72.30222
G01 X-159.89894 Y-72.43102
G01 X-160.02775 Y-72.53674
G01 X-160.17471 Y-72.61527
G01 X-160.33417 Y-72.66366
G01 X-160.49998 Y-72.67999
G01 X-160.66582 Y-72.66366
G01 X-160.82526 Y-72.61527
G01 X-160.97222 Y-72.53674
G01 X-161.10102 Y-72.43102
G01 X-161.20674 Y-72.30222
G01 X-161.28528 Y-72.15528
G01 X-161.33366 Y-71.99582
G01 X-161.34999 Y-71.82998
G01 X-161.33366 Y-71.66417
G01 X-161.28528 Y-71.50471
G01 X-161.20674 Y-71.35774
G01 X-161.10102 Y-71.22894
G01 X-160.97222 Y-71.12323
G01 X-160.82526 Y-71.04469
G01 X-160.66582 Y-70.99633
G01 X-160.49998 Y-70.98000
G01 X-160.33417 Y-70.99633
G01 X-160.17471 Y-71.04469
G01 X-160.02775 Y-71.12323
G01 X-159.89894 Y-71.22894
G01 X-159.79323 Y-71.35774
G01 X-159.71469 Y-71.50471
G01 X-159.66633 Y-71.66417
G01 X-159.65000 Y-71.82998
G01 X-159.65000 Y-69.28998
G01 X-159.66633 Y-69.45582
G01 X-159.71469 Y-69.61528
G01 X-159.79323 Y-69.76222
G01 X-159.89894 Y-69.89102
G01 X-160.02775 Y-69.99674
G01 X-160.17471 Y-70.07527
G01 X-160.33417 Y-70.12366
G01 X-160.49998 Y-70.13999
G01 X-160.66582 Y-70.12366
G01 X-160.82526 Y-70.07527
G01 X-160.97222 Y-69.99674
G01 X-161.10102 Y-69.89102
G01 X-161.20674 Y-69.76222
G01 X-161.28528 Y-69.61528
G01 X-161.33366 Y-69.45582
G01 X-161.34999 Y-69.28998
G01 X-161.33366 Y-69.12417
G01 X-161.28528 Y-68.96471
G01 X-161.20674 Y-68.81774
G01 X-161.10102 Y-68.68894
G01 X-160.97222 Y-68.58323
G01 X-160.82526 Y-68.50469
G01 X-160.66582 Y-68.45633
G01 X-160.49998 Y-68.44000
G01 X-160.33417 Y-68.45633
G01 X-160.17471 Y-68.50469
G01 X-160.02775 Y-68.58323
G01 X-159.89894 Y-68.68894
G01 X-159.79323 Y-68.81774
G01 X-159.71469 Y-68.96471
G01 X-159.66633 Y-69.12417
G01 X-159.65000 Y-69.28998
G01 X-159.65000 Y-65.90000
G01 X-161.34999 Y-65.90000
G01 X-161.34999 Y-67.59999
G01 X-159.65000 Y-67.59999
G01 X-168.89999 Y-68.62999
G01 X-168.91632 Y-68.79582
G01 X-168.96469 Y-68.95526
G01 X-169.04325 Y-69.10222
G01 X-169.14894 Y-69.23103
G01 X-169.27774 Y-69.33674
G01 X-169.42471 Y-69.41528
G01 X-169.58417 Y-69.46367
G01 X-169.74998 Y-69.48000
G01 X-169.91581 Y-69.46367
G01 X-170.07528 Y-69.41528
G01 X-170.22221 Y-69.33674
G01 X-170.35102 Y-69.23103
G01 X-170.45673 Y-69.10222
G01 X-170.53530 Y-68.95526
G01 X-170.58366 Y-68.79582
G01 X-170.59999 Y-68.62999
G01 X-170.58366 Y-68.46415
G01 X-170.53530 Y-68.30471
G01 X-170.45673 Y-68.15775
G01 X-170.35102 Y-68.02895
G01 X-170.22221 Y-67.92323
G01 X-170.07528 Y-67.84470
G01 X-169.91581 Y-67.79631
G01 X-169.74998 Y-67.77998
G01 X-169.58417 Y-67.79631
G01 X-169.42471 Y-67.84470
G01 X-169.27774 Y-67.92323
G01 X-169.14894 Y-68.02895
G01 X-169.04325 Y-68.15775
G01 X-168.96469 Y-68.30471
G01 X-168.91632 Y-68.46415
G01 X-168.89999 Y-68.62999
G01 X-168.89999 Y-71.16999
G01 X-168.91632 Y-71.33582
G01 X-168.96469 Y-71.49526
G01 X-169.04325 Y-71.64222
G01 X-169.14894 Y-71.77103
G01 X-169.27774 Y-71.87674
G01 X-169.42471 Y-71.95528
G01 X-169.58417 Y-72.00367
G01 X-169.74998 Y-72.02000
G01 X-169.91581 Y-72.00367
G01 X-170.07528 Y-71.95528
G01 X-170.22221 Y-71.87674
G01 X-170.35102 Y-71.77103
G01 X-170.45673 Y-71.64222
G01 X-170.53530 Y-71.49526
G01 X-170.58366 Y-71.33582
G01 X-170.59999 Y-71.16999
G01 X-170.58366 Y-71.00415
G01 X-170.53530 Y-70.84471
G01 X-170.45673 Y-70.69775
G01 X-170.35102 Y-70.56895
G01 X-170.22221 Y-70.46323
G01 X-170.07528 Y-70.38470
G01 X-169.91581 Y-70.33631
G01 X-169.74998 Y-70.31998
G01 X-169.58417 Y-70.33631
G01 X-169.42471 Y-70.38470
G01 X-169.27774 Y-70.46323
G01 X-169.14894 Y-70.56895
G01 X-169.04325 Y-70.69775
G01 X-168.96469 Y-70.84471
G01 X-168.91632 Y-71.00415
G01 X-168.89999 Y-71.16999
G01 X-168.89999 Y-73.70999
G01 X-168.91632 Y-73.87582
G01 X-168.96469 Y-74.03526
G01 X-169.04325 Y-74.18222
G01 X-169.14894 Y-74.31103
G01 X-169.27774 Y-74.41674
G01 X-169.42471 Y-74.49528
G01 X-169.58417 Y-74.54367
G01 X-169.74998 Y-74.56000
G01 X-169.91581 Y-74.54367
G01 X-170.07528 Y-74.49528
G01 X-170.22221 Y-74.41674
G01 X-170.35102 Y-74.31103
G01 X-170.45673 Y-74.18222
G01 X-170.53530 Y-74.03526
G01 X-170.58366 Y-73.87582
G01 X-170.59999 Y-73.70999
G01 X-170.58366 Y-73.54415
G01 X-170.53530 Y-73.38471
G01 X-170.45673 Y-73.23775
G01 X-170.35102 Y-73.10895
G01 X-170.22221 Y-73.00323
G01 X-170.07528 Y-72.92470
G01 X-169.91581 Y-72.87631
G01 X-169.74998 Y-72.85998
G01 X-169.58417 Y-72.87631
G01 X-169.42471 Y-72.92470
G01 X-169.27774 Y-73.00323
G01 X-169.14894 Y-73.10895
G01 X-169.04325 Y-73.23775
G01 X-168.96469 Y-73.38471
G01 X-168.91632 Y-73.54415
G01 X-168.89999 Y-73.70999
G01 X-168.89999 Y-76.24999
G01 X-168.91632 Y-76.41582
G01 X-168.96469 Y-76.57526
G01 X-169.04325 Y-76.72222
G01 X-169.14894 Y-76.85103
G01 X-169.27774 Y-76.95674
G01 X-169.42471 Y-77.03528
G01 X-169.58417 Y-77.08367
G01 X-169.74998 Y-77.10000
G01 X-169.91581 Y-77.08367
G01 X-170.07528 Y-77.03528
G01 X-170.22221 Y-76.95674
G01 X-170.35102 Y-76.85103
G01 X-170.45673 Y-76.72222
G01 X-170.53530 Y-76.57526
G01 X-170.58366 Y-76.41582
G01 X-170.59999 Y-76.24999
G01 X-170.58366 Y-76.08415
G01 X-170.53530 Y-75.92471
G01 X-170.45673 Y-75.77775
G01 X-170.35102 Y-75.64895
G01 X-170.22221 Y-75.54323
G01 X-170.07528 Y-75.46470
G01 X-169.91581 Y-75.41631
G01 X-169.74998 Y-75.39998
G01 X-169.58417 Y-75.41631
G01 X-169.42471 Y-75.46470
G01 X-169.27774 Y-75.54323
G01 X-169.14894 Y-75.64895
G01 X-169.04325 Y-75.77775
G01 X-168.96469 Y-75.92471
G01 X-168.91632 Y-76.08415
G01 X-168.89999 Y-76.24999
G01 X-168.89999 Y-78.18999
G01 X-168.90479 Y-78.14122
G01 X-168.91902 Y-78.09431
G01 X-168.94213 Y-78.05110
G01 X-168.97322 Y-78.01320
G01 X-169.01109 Y-77.98211
G01 X-169.05432 Y-77.95903
G01 X-169.10121 Y-77.94480
G01 X-169.14998 Y-77.93998
G01 X-170.34998 Y-77.93998
G01 X-170.39877 Y-77.94480
G01 X-170.44566 Y-77.95903
G01 X-170.48889 Y-77.98211
G01 X-170.52676 Y-78.01320
G01 X-170.55785 Y-78.05110
G01 X-170.58096 Y-78.09431
G01 X-170.59519 Y-78.14122
G01 X-170.59999 Y-78.18999
G01 X-170.59999 Y-79.38999
G01 X-170.59519 Y-79.43875
G01 X-170.58096 Y-79.48567
G01 X-170.55785 Y-79.52887
G01 X-170.52676 Y-79.56677
G01 X-170.48889 Y-79.59786
G01 X-170.44566 Y-79.62095
G01 X-170.39877 Y-79.63517
G01 X-170.34998 Y-79.64000
G01 X-169.14998 Y-79.64000
G01 X-169.10121 Y-79.63517
G01 X-169.05432 Y-79.62095
G01 X-169.01109 Y-79.59786
G01 X-168.97322 Y-79.56677
G01 X-168.94213 Y-79.52887
G01 X-168.91902 Y-79.48567
G01 X-168.90479 Y-79.43875
G01 X-168.89999 Y-79.38999
G01 X-168.89999 Y-78.18999
G01 X-168.89999 Y-81.32999
G01 X-168.91632 Y-81.49582
G01 X-168.96469 Y-81.65526
G01 X-169.04325 Y-81.80222
G01 X-169.14894 Y-81.93103
G01 X-169.27774 Y-82.03674
G01 X-169.42471 Y-82.11528
G01 X-169.58417 Y-82.16367
G01 X-169.74998 Y-82.18000
G01 X-169.91581 Y-82.16367
G01 X-170.07528 Y-82.11528
G01 X-170.22221 Y-82.03674
G01 X-170.35102 Y-81.93103
G01 X-170.45673 Y-81.80222
G01 X-170.53530 Y-81.65526
G01 X-170.58366 Y-81.49582
G01 X-170.59999 Y-81.32999
G01 X-170.58366 Y-81.16415
G01 X-170.53530 Y-81.00471
G01 X-170.45673 Y-80.85775
G01 X-170.35102 Y-80.72895
G01 X-170.22221 Y-80.62323
G01 X-170.07528 Y-80.54470
G01 X-169.91581 Y-80.49631
G01 X-169.74998 Y-80.47998
G01 X-169.58417 Y-80.49631
G01 X-169.42471 Y-80.54470
G01 X-169.27774 Y-80.62323
G01 X-169.14894 Y-80.72895
G01 X-169.04325 Y-80.85775
G01 X-168.96469 Y-81.00471
G01 X-168.91632 Y-81.16415
G01 X-168.89999 Y-81.32999
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z5.00000 ( retract )

G00 X-175.02500 Y-87.24999 ( rapid move to begin. )
G01 F50.00000
( Mill infeed pass 1/1 )
G01 Z-0.04000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F100.00000
G01 X-175.02500 Y-87.24999
G01 X-175.04133 Y-87.41580
G01 X-175.08969 Y-87.57526
G01 X-175.16823 Y-87.72223
G01 X-175.27394 Y-87.85103
G01 X-175.40275 Y-87.95675
G01 X-175.54971 Y-88.03528
G01 X-175.70915 Y-88.08364
G01 X-175.87498 Y-88.09998
G01 X-176.12500 Y-88.09998
G01 X-176.29081 Y-88.08364
G01 X-176.45027 Y-88.03528
G01 X-176.59723 Y-87.95675
G01 X-176.72604 Y-87.85103
G01 X-176.83173 Y-87.72223
G01 X-176.91029 Y-87.57526
G01 X-176.95865 Y-87.41580
G01 X-176.97498 Y-87.24999
G01 X-176.95865 Y-87.08415
G01 X-176.91029 Y-86.92472
G01 X-176.83173 Y-86.77775
G01 X-176.72604 Y-86.64895
G01 X-176.59723 Y-86.54324
G01 X-176.45027 Y-86.46470
G01 X-176.29081 Y-86.41631
G01 X-176.12500 Y-86.39998
G01 X-175.87498 Y-86.39998
G01 X-175.70915 Y-86.41631
G01 X-175.54971 Y-86.46470
G01 X-175.40275 Y-86.54324
G01 X-175.27394 Y-86.64895
G01 X-175.16823 Y-86.77775
G01 X-175.08969 Y-86.92472
G01 X-175.04133 Y-87.08415
G01 X-175.02500 Y-87.24999
G01 X-175.02500 Y-84.75000
G01 X-175.04133 Y-84.91581
G01 X-175.08969 Y-85.07527
G01 X-175.16823 Y-85.22223
G01 X-175.27394 Y-85.35104
G01 X-175.40275 Y-85.45673
G01 X-175.54971 Y-85.53529
G01 X-175.70915 Y-85.58365
G01 X-175.87498 Y-85.59998
G01 X-176.12500 Y-85.59998
G01 X-176.29081 Y-85.58365
G01 X-176.45027 Y-85.53529
G01 X-176.59723 Y-85.45673
G01 X-176.72604 Y-85.35104
G01 X-176.83173 Y-85.22223
G01 X-176.91029 Y-85.07527
G01 X-176.95865 Y-84.91581
G01 X-176.97498 Y-84.75000
G01 X-176.95865 Y-84.58416
G01 X-176.91029 Y-84.42470
G01 X-176.83173 Y-84.27776
G01 X-176.72604 Y-84.14896
G01 X-176.59723 Y-84.04324
G01 X-176.45027 Y-83.96468
G01 X-176.29081 Y-83.91632
G01 X-176.12500 Y-83.89998
G01 X-175.87498 Y-83.89998
G01 X-175.70915 Y-83.91632
G01 X-175.54971 Y-83.96468
G01 X-175.40275 Y-84.04324
G01 X-175.27394 Y-84.14896
G01 X-175.16823 Y-84.27776
G01 X-175.08969 Y-84.42470
G01 X-175.04133 Y-84.58416
G01 X-175.02500 Y-84.75000
G01 X-175.02500 Y-82.24998
G01 X-175.04133 Y-82.41581
G01 X-175.08969 Y-82.57527
G01 X-175.16823 Y-82.72221
G01 X-175.27394 Y-82.85102
G01 X-175.40275 Y-82.95673
G01 X-175.54971 Y-83.03529
G01 X-175.70915 Y-83.08365
G01 X-175.87498 Y-83.09999
G01 X-176.12500 Y-83.09999
G01 X-176.29081 Y-83.08365
G01 X-176.45027 Y-83.03529
G01 X-176.59723 Y-82.95673
G01 X-176.72604 Y-82.85102
G01 X-176.83173 Y-82.72221
G01 X-176.91029 Y-82.57527
G01 X-176.95865 Y-82.41581
G01 X-176.97498 Y-82.24998
G01 X-176.95865 Y-82.08416
G01 X-176.91029 Y-81.92470
G01 X-176.83173 Y-81.77776
G01 X-176.72604 Y-81.64893
G01 X-176.59723 Y-81.54325
G01 X-176.45027 Y-81.46468
G01 X-176.29081 Y-81.41632
G01 X-176.12500 Y-81.39999
G01 X-175.87498 Y-81.39999
G01 X-175.70915 Y-81.41632
G01 X-175.54971 Y-81.46468
G01 X-175.40275 Y-81.54325
G01 X-175.27394 Y-81.64893
G01 X-175.16823 Y-81.77776
G01 X-175.08969 Y-81.92470
G01 X-175.04133 Y-82.08416
G01 X-175.02500 Y-82.24998
G01 X-175.02500 Y-79.74998
G01 X-175.04133 Y-79.91582
G01 X-175.08969 Y-80.07528
G01 X-175.16823 Y-80.22222
G01 X-175.27394 Y-80.35102
G01 X-175.40275 Y-80.45674
G01 X-175.54971 Y-80.53530
G01 X-175.70915 Y-80.58366
G01 X-175.87498 Y-80.59999
G01 X-176.12500 Y-80.59999
G01 X-176.29081 Y-80.58366
G01 X-176.45027 Y-80.53530
G01 X-176.59723 Y-80.45674
G01 X-176.72604 Y-80.35102
G01 X-176.83173 Y-80.22222
G01 X-176.91029 Y-80.07528
G01 X-176.95865 Y-79.91582
G01 X-176.97498 Y-79.74998
G01 X-176.95865 Y-79.58417
G01 X-176.91029 Y-79.42471
G01 X-176.83173 Y-79.27774
G01 X-176.72604 Y-79.14894
G01 X-176.59723 Y-79.04325
G01 X-176.45027 Y-78.96469
G01 X-176.29081 Y-78.91633
G01 X-176.12500 Y-78.89999
G01 X-175.87498 Y-78.89999
G01 X-175.70915 Y-78.91633
G01 X-175.54971 Y-78.96469
G01 X-175.40275 Y-79.04325
G01 X-175.27394 Y-79.14894
G01 X-175.16823 Y-79.27774
G01 X-175.08969 Y-79.42471
G01 X-175.04133 Y-79.58417
G01 X-175.02500 Y-79.74998
G01 X-175.02500 Y-77.24999
G01 X-175.04133 Y-77.41582
G01 X-175.08969 Y-77.57526
G01 X-175.16823 Y-77.72222
G01 X-175.27394 Y-77.85103
G01 X-175.40275 Y-77.95674
G01 X-175.54971 Y-78.03528
G01 X-175.70915 Y-78.08366
G01 X-175.87498 Y-78.10000
G01 X-176.12500 Y-78.10000
G01 X-176.29081 Y-78.08366
G01 X-176.45027 Y-78.03528
G01 X-176.59723 Y-77.95674
G01 X-176.72604 Y-77.85103
G01 X-176.83173 Y-77.72222
G01 X-176.91029 Y-77.57526
G01 X-176.95865 Y-77.41582
G01 X-176.97498 Y-77.24999
G01 X-176.95865 Y-77.08415
G01 X-176.91029 Y-76.92471
G01 X-176.83173 Y-76.77775
G01 X-176.72604 Y-76.64894
G01 X-176.59723 Y-76.54323
G01 X-176.45027 Y-76.46469
G01 X-176.29081 Y-76.41633
G01 X-176.12500 Y-76.40000
G01 X-175.87498 Y-76.40000
G01 X-175.70915 Y-76.41633
G01 X-175.54971 Y-76.46469
G01 X-175.40275 Y-76.54323
G01 X-175.27394 Y-76.64894
G01 X-175.16823 Y-76.77775
G01 X-175.08969 Y-76.92471
G01 X-175.04133 Y-77.08415
G01 X-175.02500 Y-77.24999
G01 X-175.02500 Y-74.74999
G01 X-175.04133 Y-74.91580
G01 X-175.08969 Y-75.07526
G01 X-175.16823 Y-75.22223
G01 X-175.27394 Y-75.35103
G01 X-175.40275 Y-75.45675
G01 X-175.54971 Y-75.53528
G01 X-175.70915 Y-75.58364
G01 X-175.87498 Y-75.59998
G01 X-176.12500 Y-75.59998
G01 X-176.29081 Y-75.58364
G01 X-176.45027 Y-75.53528
G01 X-176.59723 Y-75.45675
G01 X-176.72604 Y-75.35103
G01 X-176.83173 Y-75.22223
G01 X-176.91029 Y-75.07526
G01 X-176.95865 Y-74.91580
G01 X-176.97498 Y-74.74999
G01 X-176.95865 Y-74.58415
G01 X-176.91029 Y-74.42472
G01 X-176.83173 Y-74.27775
G01 X-176.72604 Y-74.14895
G01 X-176.59723 Y-74.04324
G01 X-176.45027 Y-73.96470
G01 X-176.29081 Y-73.91631
G01 X-176.12500 Y-73.89998
G01 X-175.87498 Y-73.89998
G01 X-175.70915 Y-73.91631
G01 X-175.54971 Y-73.96470
G01 X-175.40275 Y-74.04324
G01 X-175.27394 Y-74.14895
G01 X-175.16823 Y-74.27775
G01 X-175.08969 Y-74.42472
G01 X-175.04133 Y-74.58415
G01 X-175.02500 Y-74.74999
G01 X-175.02500 Y-72.25000
G01 X-175.04133 Y-72.41581
G01 X-175.08969 Y-72.57527
G01 X-175.16823 Y-72.72223
G01 X-175.27394 Y-72.85104
G01 X-175.40275 Y-72.95672
G01 X-175.54971 Y-73.03529
G01 X-175.70915 Y-73.08365
G01 X-175.87498 Y-73.09998
G01 X-176.12500 Y-73.09998
G01 X-176.29081 Y-73.08365
G01 X-176.45027 Y-73.03529
G01 X-176.59723 Y-72.95672
G01 X-176.72604 Y-72.85104
G01 X-176.83173 Y-72.72223
G01 X-176.91029 Y-72.57527
G01 X-176.95865 Y-72.41581
G01 X-176.97498 Y-72.25000
G01 X-176.95865 Y-72.08416
G01 X-176.91029 Y-71.92470
G01 X-176.83173 Y-71.77776
G01 X-176.72604 Y-71.64896
G01 X-176.59723 Y-71.54324
G01 X-176.45027 Y-71.46468
G01 X-176.29081 Y-71.41632
G01 X-176.12500 Y-71.39998
G01 X-175.87498 Y-71.39998
G01 X-175.70915 Y-71.41632
G01 X-175.54971 Y-71.46468
G01 X-175.40275 Y-71.54324
G01 X-175.27394 Y-71.64896
G01 X-175.16823 Y-71.77776
G01 X-175.08969 Y-71.92470
G01 X-175.04133 Y-72.08416
G01 X-175.02500 Y-72.25000
G01 X-175.02500 Y-69.74997
G01 X-175.04133 Y-69.91581
G01 X-175.08969 Y-70.07527
G01 X-175.16823 Y-70.22221
G01 X-175.27394 Y-70.35104
G01 X-175.40275 Y-70.45673
G01 X-175.54971 Y-70.53529
G01 X-175.70915 Y-70.58365
G01 X-175.87498 Y-70.59999
G01 X-176.12500 Y-70.59999
G01 X-176.29081 Y-70.58365
G01 X-176.45027 Y-70.53529
G01 X-176.59723 Y-70.45673
G01 X-176.72604 Y-70.35104
G01 X-176.83173 Y-70.22221
G01 X-176.91029 Y-70.07527
G01 X-176.95865 Y-69.91581
G01 X-176.97498 Y-69.74997
G01 X-176.95865 Y-69.58416
G01 X-176.91029 Y-69.42470
G01 X-176.83173 Y-69.27776
G01 X-176.72604 Y-69.14893
G01 X-176.59723 Y-69.04325
G01 X-176.45027 Y-68.96468
G01 X-176.29081 Y-68.91632
G01 X-176.12500 Y-68.89999
G01 X-175.87498 Y-68.89999
G01 X-175.70915 Y-68.91632
G01 X-175.54971 Y-68.96468
G01 X-175.40275 Y-69.04325
G01 X-175.27394 Y-69.14893
G01 X-175.16823 Y-69.27776
G01 X-175.08969 Y-69.42470
G01 X-175.04133 Y-69.58416
G01 X-175.02500 Y-69.74997
G01 X-175.02500 Y-67.24998
G01 X-175.04133 Y-67.41582
G01 X-175.08969 Y-67.57528
G01 X-175.16823 Y-67.72222
G01 X-175.27394 Y-67.85102
G01 X-175.40275 Y-67.95673
G01 X-175.54971 Y-68.03530
G01 X-175.70915 Y-68.08366
G01 X-175.87498 Y-68.09999
G01 X-176.12500 Y-68.09999
G01 X-176.29081 Y-68.08366
G01 X-176.45027 Y-68.03530
G01 X-176.59723 Y-67.95673
G01 X-176.72604 Y-67.85102
G01 X-176.83173 Y-67.72222
G01 X-176.91029 Y-67.57528
G01 X-176.95865 Y-67.41582
G01 X-176.97498 Y-67.24998
G01 X-176.95865 Y-67.08417
G01 X-176.91029 Y-66.92471
G01 X-176.83173 Y-66.77774
G01 X-176.72604 Y-66.64894
G01 X-176.59723 Y-66.54325
G01 X-176.45027 Y-66.46469
G01 X-176.29081 Y-66.41633
G01 X-176.12500 Y-66.39999
G01 X-175.87498 Y-66.39999
G01 X-175.70915 Y-66.41633
G01 X-175.54971 Y-66.46469
G01 X-175.40275 Y-66.54325
G01 X-175.27394 Y-66.64894
G01 X-175.16823 Y-66.77774
G01 X-175.08969 Y-66.92471
G01 X-175.04133 Y-67.08417
G01 X-175.02500 Y-67.24998
G01 X-175.02500 Y-64.14999
G01 X-175.02980 Y-64.10122
G01 X-175.04402 Y-64.05430
G01 X-175.06711 Y-64.01110
G01 X-175.09820 Y-63.97320
G01 X-175.13610 Y-63.94211
G01 X-175.17930 Y-63.91902
G01 X-175.22622 Y-63.90480
G01 X-175.27499 Y-63.90000
G01 X-176.72500 Y-63.90000
G01 X-176.77376 Y-63.90480
G01 X-176.82065 Y-63.91902
G01 X-176.86388 Y-63.94211
G01 X-176.90175 Y-63.97320
G01 X-176.93284 Y-64.01110
G01 X-176.95596 Y-64.05430
G01 X-176.97018 Y-64.10122
G01 X-176.97498 Y-64.14999
G01 X-176.97498 Y-65.34998
G01 X-176.97018 Y-65.39875
G01 X-176.95596 Y-65.44567
G01 X-176.93284 Y-65.48887
G01 X-176.90175 Y-65.52677
G01 X-176.86388 Y-65.55786
G01 X-176.82065 Y-65.58095
G01 X-176.77376 Y-65.59520
G01 X-176.72500 Y-65.60000
G01 X-175.27499 Y-65.60000
G01 X-175.22622 Y-65.59520
G01 X-175.17930 Y-65.58095
G01 X-175.13610 Y-65.55786
G01 X-175.09820 Y-65.52677
G01 X-175.06711 Y-65.48887
G01 X-175.04402 Y-65.44567
G01 X-175.02980 Y-65.39875
G01 X-175.02500 Y-65.34998
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z5.00000 ( retract )

G00 X-182.27500 Y-65.34998 ( rapid move to begin. )
G01 F50.00000
( Mill infeed pass 1/1 )
G01 Z-0.04000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F100.00000
G01 X-182.27500 Y-65.34998
G01 X-182.27980 Y-65.39875
G01 X-182.29402 Y-65.44567
G01 X-182.31711 Y-65.48887
G01 X-182.34820 Y-65.52677
G01 X-182.38610 Y-65.55786
G01 X-182.42933 Y-65.58095
G01 X-182.47622 Y-65.59520
G01 X-182.52498 Y-65.60000
G01 X-183.97499 Y-65.60000
G01 X-184.02376 Y-65.59520
G01 X-184.07065 Y-65.58095
G01 X-184.11388 Y-65.55786
G01 X-184.15175 Y-65.52677
G01 X-184.18284 Y-65.48887
G01 X-184.20596 Y-65.44567
G01 X-184.22018 Y-65.39875
G01 X-184.22498 Y-65.34998
G01 X-184.22498 Y-64.14999
G01 X-184.22018 Y-64.10122
G01 X-184.20596 Y-64.05430
G01 X-184.18284 Y-64.01110
G01 X-184.15175 Y-63.97320
G01 X-184.11388 Y-63.94211
G01 X-184.07065 Y-63.91902
G01 X-184.02376 Y-63.90480
G01 X-183.97499 Y-63.90000
G01 X-182.52498 Y-63.90000
G01 X-182.47622 Y-63.90480
G01 X-182.42933 Y-63.91902
G01 X-182.38610 Y-63.94211
G01 X-182.34820 Y-63.97320
G01 X-182.31711 Y-64.01110
G01 X-182.29402 Y-64.05430
G01 X-182.27980 Y-64.10122
G01 X-182.27500 Y-64.14999
G01 X-182.27500 Y-67.24998
G01 X-182.29133 Y-67.08417
G01 X-182.33969 Y-66.92471
G01 X-182.41823 Y-66.77774
G01 X-182.52394 Y-66.64894
G01 X-182.65275 Y-66.54325
G01 X-182.79971 Y-66.46469
G01 X-182.95917 Y-66.41633
G01 X-183.12498 Y-66.39999
G01 X-183.37500 Y-66.39999
G01 X-183.54081 Y-66.41633
G01 X-183.70027 Y-66.46469
G01 X-183.84723 Y-66.54325
G01 X-183.97604 Y-66.64894
G01 X-184.08172 Y-66.77774
G01 X-184.16029 Y-66.92471
G01 X-184.20865 Y-67.08417
G01 X-184.22498 Y-67.24998
G01 X-184.20865 Y-67.41582
G01 X-184.16029 Y-67.57528
G01 X-184.08172 Y-67.72222
G01 X-183.97604 Y-67.85102
G01 X-183.84723 Y-67.95673
G01 X-183.70027 Y-68.03530
G01 X-183.54081 Y-68.08366
G01 X-183.37500 Y-68.09999
G01 X-183.12498 Y-68.09999
G01 X-182.95917 Y-68.08366
G01 X-182.79971 Y-68.03530
G01 X-182.65275 Y-67.95673
G01 X-182.52394 Y-67.85102
G01 X-182.41823 Y-67.72222
G01 X-182.33969 Y-67.57528
G01 X-182.29133 Y-67.41582
G01 X-182.27500 Y-67.24998
G01 X-182.27500 Y-69.74997
G01 X-182.29133 Y-69.58416
G01 X-182.33969 Y-69.42470
G01 X-182.41823 Y-69.27776
G01 X-182.52394 Y-69.14893
G01 X-182.65275 Y-69.04325
G01 X-182.79971 Y-68.96468
G01 X-182.95917 Y-68.91632
G01 X-183.12498 Y-68.89999
G01 X-183.37500 Y-68.89999
G01 X-183.54081 Y-68.91632
G01 X-183.70027 Y-68.96468
G01 X-183.84723 Y-69.04325
G01 X-183.97604 Y-69.14893
G01 X-184.08172 Y-69.27776
G01 X-184.16029 Y-69.42470
G01 X-184.20865 Y-69.58416
G01 X-184.22498 Y-69.74997
G01 X-184.20865 Y-69.91581
G01 X-184.16029 Y-70.07527
G01 X-184.08172 Y-70.22221
G01 X-183.97604 Y-70.35104
G01 X-183.84723 Y-70.45673
G01 X-183.70027 Y-70.53529
G01 X-183.54081 Y-70.58365
G01 X-183.37500 Y-70.59999
G01 X-183.12498 Y-70.59999
G01 X-182.95917 Y-70.58365
G01 X-182.79971 Y-70.53529
G01 X-182.65275 Y-70.45673
G01 X-182.52394 Y-70.35104
G01 X-182.41823 Y-70.22221
G01 X-182.33969 Y-70.07527
G01 X-182.29133 Y-69.91581
G01 X-182.27500 Y-69.74997
G01 X-182.27500 Y-72.25000
G01 X-182.29133 Y-72.08416
G01 X-182.33969 Y-71.92470
G01 X-182.41823 Y-71.77776
G01 X-182.52394 Y-71.64896
G01 X-182.65275 Y-71.54324
G01 X-182.79971 Y-71.46468
G01 X-182.95917 Y-71.41632
G01 X-183.12498 Y-71.39998
G01 X-183.37500 Y-71.39998
G01 X-183.54081 Y-71.41632
G01 X-183.70027 Y-71.46468
G01 X-183.84723 Y-71.54324
G01 X-183.97604 Y-71.64896
G01 X-184.08172 Y-71.77776
G01 X-184.16029 Y-71.92470
G01 X-184.20865 Y-72.08416
G01 X-184.22498 Y-72.25000
G01 X-184.20865 Y-72.41581
G01 X-184.16029 Y-72.57527
G01 X-184.08172 Y-72.72223
G01 X-183.97604 Y-72.85104
G01 X-183.84723 Y-72.95672
G01 X-183.70027 Y-73.03529
G01 X-183.54081 Y-73.08365
G01 X-183.37500 Y-73.09998
G01 X-183.12498 Y-73.09998
G01 X-182.95917 Y-73.08365
G01 X-182.79971 Y-73.03529
G01 X-182.65275 Y-72.95672
G01 X-182.52394 Y-72.85104
G01 X-182.41823 Y-72.72223
G01 X-182.33969 Y-72.57527
G01 X-182.29133 Y-72.41581
G01 X-182.27500 Y-72.25000
G01 X-182.27500 Y-74.74999
G01 X-182.29133 Y-74.58415
G01 X-182.33969 Y-74.42472
G01 X-182.41823 Y-74.27775
G01 X-182.52394 Y-74.14895
G01 X-182.65275 Y-74.04324
G01 X-182.79971 Y-73.96470
G01 X-182.95917 Y-73.91631
G01 X-183.12498 Y-73.89998
G01 X-183.37500 Y-73.89998
G01 X-183.54081 Y-73.91631
G01 X-183.70027 Y-73.96470
G01 X-183.84723 Y-74.04324
G01 X-183.97604 Y-74.14895
G01 X-184.08172 Y-74.27775
G01 X-184.16029 Y-74.42472
G01 X-184.20865 Y-74.58415
G01 X-184.22498 Y-74.74999
G01 X-184.20865 Y-74.91580
G01 X-184.16029 Y-75.07526
G01 X-184.08172 Y-75.22223
G01 X-183.97604 Y-75.35103
G01 X-183.84723 Y-75.45675
G01 X-183.70027 Y-75.53528
G01 X-183.54081 Y-75.58364
G01 X-183.37500 Y-75.59998
G01 X-183.12498 Y-75.59998
G01 X-182.95917 Y-75.58364
G01 X-182.79971 Y-75.53528
G01 X-182.65275 Y-75.45675
G01 X-182.52394 Y-75.35103
G01 X-182.41823 Y-75.22223
G01 X-182.33969 Y-75.07526
G01 X-182.29133 Y-74.91580
G01 X-182.27500 Y-74.74999
G01 X-182.27500 Y-77.24999
G01 X-182.29133 Y-77.08415
G01 X-182.33969 Y-76.92471
G01 X-182.41823 Y-76.77775
G01 X-182.52394 Y-76.64894
G01 X-182.65275 Y-76.54323
G01 X-182.79971 Y-76.46469
G01 X-182.95917 Y-76.41633
G01 X-183.12498 Y-76.40000
G01 X-183.37500 Y-76.40000
G01 X-183.54081 Y-76.41633
G01 X-183.70027 Y-76.46469
G01 X-183.84723 Y-76.54323
G01 X-183.97604 Y-76.64894
G01 X-184.08172 Y-76.77775
G01 X-184.16029 Y-76.92471
G01 X-184.20865 Y-77.08415
G01 X-184.22498 Y-77.24999
G01 X-184.20865 Y-77.41582
G01 X-184.16029 Y-77.57526
G01 X-184.08172 Y-77.72222
G01 X-183.97604 Y-77.85103
G01 X-183.84723 Y-77.95674
G01 X-183.70027 Y-78.03528
G01 X-183.54081 Y-78.08366
G01 X-183.37500 Y-78.10000
G01 X-183.12498 Y-78.10000
G01 X-182.95917 Y-78.08366
G01 X-182.79971 Y-78.03528
G01 X-182.65275 Y-77.95674
G01 X-182.52394 Y-77.85103
G01 X-182.41823 Y-77.72222
G01 X-182.33969 Y-77.57526
G01 X-182.29133 Y-77.41582
G01 X-182.27500 Y-77.24999
G01 X-182.27500 Y-79.74998
G01 X-182.29133 Y-79.58417
G01 X-182.33969 Y-79.42471
G01 X-182.41823 Y-79.27774
G01 X-182.52394 Y-79.14894
G01 X-182.65275 Y-79.04325
G01 X-182.79971 Y-78.96469
G01 X-182.95917 Y-78.91633
G01 X-183.12498 Y-78.89999
G01 X-183.37500 Y-78.89999
G01 X-183.54081 Y-78.91633
G01 X-183.70027 Y-78.96469
G01 X-183.84723 Y-79.04325
G01 X-183.97604 Y-79.14894
G01 X-184.08172 Y-79.27774
G01 X-184.16029 Y-79.42471
G01 X-184.20865 Y-79.58417
G01 X-184.22498 Y-79.74998
G01 X-184.20865 Y-79.91582
G01 X-184.16029 Y-80.07528
G01 X-184.08172 Y-80.22222
G01 X-183.97604 Y-80.35102
G01 X-183.84723 Y-80.45674
G01 X-183.70027 Y-80.53530
G01 X-183.54081 Y-80.58366
G01 X-183.37500 Y-80.59999
G01 X-183.12498 Y-80.59999
G01 X-182.95917 Y-80.58366
G01 X-182.79971 Y-80.53530
G01 X-182.65275 Y-80.45674
G01 X-182.52394 Y-80.35102
G01 X-182.41823 Y-80.22222
G01 X-182.33969 Y-80.07528
G01 X-182.29133 Y-79.91582
G01 X-182.27500 Y-79.74998
G01 X-182.27500 Y-82.24998
G01 X-182.29133 Y-82.08416
G01 X-182.33969 Y-81.92470
G01 X-182.41823 Y-81.77776
G01 X-182.52394 Y-81.64893
G01 X-182.65275 Y-81.54325
G01 X-182.79971 Y-81.46468
G01 X-182.95917 Y-81.41632
G01 X-183.12498 Y-81.39999
G01 X-183.37500 Y-81.39999
G01 X-183.54081 Y-81.41632
G01 X-183.70027 Y-81.46468
G01 X-183.84723 Y-81.54325
G01 X-183.97604 Y-81.64893
G01 X-184.08172 Y-81.77776
G01 X-184.16029 Y-81.92470
G01 X-184.20865 Y-82.08416
G01 X-184.22498 Y-82.24998
G01 X-184.20865 Y-82.41581
G01 X-184.16029 Y-82.57527
G01 X-184.08172 Y-82.72221
G01 X-183.97604 Y-82.85102
G01 X-183.84723 Y-82.95673
G01 X-183.70027 Y-83.03529
G01 X-183.54081 Y-83.08365
G01 X-183.37500 Y-83.09999
G01 X-183.12498 Y-83.09999
G01 X-182.95917 Y-83.08365
G01 X-182.79971 Y-83.03529
G01 X-182.65275 Y-82.95673
G01 X-182.52394 Y-82.85102
G01 X-182.41823 Y-82.72221
G01 X-182.33969 Y-82.57527
G01 X-182.29133 Y-82.41581
G01 X-182.27500 Y-82.24998
G01 X-182.27500 Y-84.75000
G01 X-182.29133 Y-84.58416
G01 X-182.33969 Y-84.42470
G01 X-182.41823 Y-84.27776
G01 X-182.52394 Y-84.14896
G01 X-182.65275 Y-84.04324
G01 X-182.79971 Y-83.96468
G01 X-182.95917 Y-83.91632
G01 X-183.12498 Y-83.89998
G01 X-183.37500 Y-83.89998
G01 X-183.54081 Y-83.91632
G01 X-183.70027 Y-83.96468
G01 X-183.84723 Y-84.04324
G01 X-183.97604 Y-84.14896
G01 X-184.08172 Y-84.27776
G01 X-184.16029 Y-84.42470
G01 X-184.20865 Y-84.58416
G01 X-184.22498 Y-84.75000
G01 X-184.20865 Y-84.91581
G01 X-184.16029 Y-85.07527
G01 X-184.08172 Y-85.22223
G01 X-183.97604 Y-85.35104
G01 X-183.84723 Y-85.45673
G01 X-183.70027 Y-85.53529
G01 X-183.54081 Y-85.58365
G01 X-183.37500 Y-85.59998
G01 X-183.12498 Y-85.59998
G01 X-182.95917 Y-85.58365
G01 X-182.79971 Y-85.53529
G01 X-182.65275 Y-85.45673
G01 X-182.52394 Y-85.35104
G01 X-182.41823 Y-85.22223
G01 X-182.33969 Y-85.07527
G01 X-182.29133 Y-84.91581
G01 X-182.27500 Y-84.75000
G01 X-182.27500 Y-87.24999
G01 X-182.29133 Y-87.08415
G01 X-182.33969 Y-86.92472
G01 X-182.41823 Y-86.77775
G01 X-182.52394 Y-86.64895
G01 X-182.65275 Y-86.54324
G01 X-182.79971 Y-86.46470
G01 X-182.95917 Y-86.41631
G01 X-183.12498 Y-86.39998
G01 X-183.37500 Y-86.39998
G01 X-183.54081 Y-86.41631
G01 X-183.70027 Y-86.46470
G01 X-183.84723 Y-86.54324
G01 X-183.97604 Y-86.64895
G01 X-184.08172 Y-86.77775
G01 X-184.16029 Y-86.92472
G01 X-184.20865 Y-87.08415
G01 X-184.22498 Y-87.24999
G01 X-184.20865 Y-87.41580
G01 X-184.16029 Y-87.57526
G01 X-184.08172 Y-87.72223
G01 X-183.97604 Y-87.85103
G01 X-183.84723 Y-87.95675
G01 X-183.70027 Y-88.03528
G01 X-183.54081 Y-88.08364
G01 X-183.37500 Y-88.09998
G01 X-183.12498 Y-88.09998
G01 X-182.95917 Y-88.08364
G01 X-182.79971 Y-88.03528
G01 X-182.65275 Y-87.95675
G01 X-182.52394 Y-87.85103
G01 X-182.41823 Y-87.72223
G01 X-182.33969 Y-87.57526
G01 X-182.29133 Y-87.41580
G01 X-182.27500 Y-87.24999
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z5.00000 ( retract )

G00 X-187.99998 Y-86.64999 ( rapid move to begin. )
G01 F50.00000
( Mill infeed pass 1/1 )
G01 Z-0.04000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F100.00000
G01 X-187.99998 Y-86.64999
G01 X-188.00478 Y-86.60122
G01 X-188.01903 Y-86.55431
G01 X-188.04212 Y-86.51110
G01 X-188.07321 Y-86.47321
G01 X-188.11110 Y-86.44212
G01 X-188.15431 Y-86.41903
G01 X-188.20122 Y-86.40478
G01 X-188.24999 Y-86.39998
G01 X-189.69998 Y-86.39998
G01 X-189.74877 Y-86.40478
G01 X-189.79566 Y-86.41903
G01 X-189.83889 Y-86.44212
G01 X-189.87676 Y-86.47321
G01 X-189.90785 Y-86.51110
G01 X-189.93096 Y-86.55431
G01 X-189.94519 Y-86.60122
G01 X-189.94999 Y-86.64999
G01 X-189.94999 Y-87.84999
G01 X-189.94519 Y-87.89876
G01 X-189.93096 Y-87.94565
G01 X-189.90785 Y-87.98888
G01 X-189.87676 Y-88.02677
G01 X-189.83889 Y-88.05786
G01 X-189.79566 Y-88.08095
G01 X-189.74877 Y-88.09518
G01 X-189.69998 Y-88.09998
G01 X-188.24999 Y-88.09998
G01 X-188.20122 Y-88.09518
G01 X-188.15431 Y-88.08095
G01 X-188.11110 Y-88.05786
G01 X-188.07321 Y-88.02677
G01 X-188.04212 Y-87.98888
G01 X-188.01903 Y-87.94565
G01 X-188.00478 Y-87.89876
G01 X-187.99998 Y-87.84999
G01 X-187.99998 Y-84.75000
G01 X-188.01631 Y-84.91581
G01 X-188.06470 Y-85.07527
G01 X-188.14324 Y-85.22223
G01 X-188.24895 Y-85.35104
G01 X-188.37775 Y-85.45673
G01 X-188.52472 Y-85.53529
G01 X-188.68415 Y-85.58365
G01 X-188.84999 Y-85.59998
G01 X-189.09998 Y-85.59998
G01 X-189.26581 Y-85.58365
G01 X-189.42528 Y-85.53529
G01 X-189.57221 Y-85.45673
G01 X-189.70102 Y-85.35104
G01 X-189.80673 Y-85.22223
G01 X-189.88529 Y-85.07527
G01 X-189.93366 Y-84.91581
G01 X-189.94999 Y-84.75000
G01 X-189.93366 Y-84.58416
G01 X-189.88529 Y-84.42470
G01 X-189.80673 Y-84.27776
G01 X-189.70102 Y-84.14896
G01 X-189.57221 Y-84.04324
G01 X-189.42528 Y-83.96468
G01 X-189.26581 Y-83.91632
G01 X-189.09998 Y-83.89998
G01 X-188.84999 Y-83.89998
G01 X-188.68415 Y-83.91632
G01 X-188.52472 Y-83.96468
G01 X-188.37775 Y-84.04324
G01 X-188.24895 Y-84.14896
G01 X-188.14324 Y-84.27776
G01 X-188.06470 Y-84.42470
G01 X-188.01631 Y-84.58416
G01 X-187.99998 Y-84.75000
G01 X-187.99998 Y-82.24998
G01 X-188.01631 Y-82.08416
G01 X-188.06470 Y-81.92470
G01 X-188.14324 Y-81.77776
G01 X-188.24895 Y-81.64893
G01 X-188.37775 Y-81.54325
G01 X-188.52472 Y-81.46468
G01 X-188.68415 Y-81.41632
G01 X-188.84999 Y-81.39999
G01 X-189.09998 Y-81.39999
G01 X-189.26581 Y-81.41632
G01 X-189.42528 Y-81.46468
G01 X-189.57221 Y-81.54325
G01 X-189.70102 Y-81.64893
G01 X-189.80673 Y-81.77776
G01 X-189.88529 Y-81.92470
G01 X-189.93366 Y-82.08416
G01 X-189.94999 Y-82.24998
G01 X-189.93366 Y-82.41581
G01 X-189.88529 Y-82.57527
G01 X-189.80673 Y-82.72221
G01 X-189.70102 Y-82.85102
G01 X-189.57221 Y-82.95673
G01 X-189.42528 Y-83.03529
G01 X-189.26581 Y-83.08365
G01 X-189.09998 Y-83.09999
G01 X-188.84999 Y-83.09999
G01 X-188.68415 Y-83.08365
G01 X-188.52472 Y-83.03529
G01 X-188.37775 Y-82.95673
G01 X-188.24895 Y-82.85102
G01 X-188.14324 Y-82.72221
G01 X-188.06470 Y-82.57527
G01 X-188.01631 Y-82.41581
G01 X-187.99998 Y-82.24998
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z5.00000 ( retract )

G00 X-205.34998 Y-67.81498 ( rapid move to begin. )
G01 F50.00000
( Mill infeed pass 1/1 )
G01 Z-0.04000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F100.00000
G01 X-205.34998 Y-67.81498
G01 X-205.37109 Y-67.60040
G01 X-205.43373 Y-67.39402
G01 X-205.53538 Y-67.20385
G01 X-205.67216 Y-67.03718
G01 X-205.83886 Y-66.90037
G01 X-206.02900 Y-66.79872
G01 X-206.23538 Y-66.73611
G01 X-206.44998 Y-66.71498
G01 X-206.66456 Y-66.73611
G01 X-206.87093 Y-66.79872
G01 X-207.06108 Y-66.90037
G01 X-207.22781 Y-67.03718
G01 X-207.36461 Y-67.20385
G01 X-207.46626 Y-67.39402
G01 X-207.52885 Y-67.60040
G01 X-207.54995 Y-67.81498
G01 X-207.52885 Y-68.02958
G01 X-207.46626 Y-68.23593
G01 X-207.36461 Y-68.42613
G01 X-207.22781 Y-68.59280
G01 X-207.06108 Y-68.72961
G01 X-206.87093 Y-68.83126
G01 X-206.66456 Y-68.89384
G01 X-206.44998 Y-68.91498
G01 X-206.23538 Y-68.89384
G01 X-206.02900 Y-68.83126
G01 X-205.83886 Y-68.72961
G01 X-205.67216 Y-68.59280
G01 X-205.53538 Y-68.42613
G01 X-205.43373 Y-68.23593
G01 X-205.37109 Y-68.02958
G01 X-205.34998 Y-67.81498
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z5.00000 ( retract )

G00 X-202.34999 Y-72.53999 ( rapid move to begin. )
G01 F50.00000
( Mill infeed pass 1/1 )
G01 Z-0.04000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F100.00000
G01 X-202.34999 Y-72.53999
G01 X-202.36536 Y-72.69607
G01 X-202.41087 Y-72.84613
G01 X-202.48481 Y-72.98444
G01 X-202.58430 Y-73.10567
G01 X-202.70554 Y-73.20516
G01 X-202.84384 Y-73.27910
G01 X-202.99390 Y-73.32462
G01 X-203.14999 Y-73.33999
G01 X-203.30604 Y-73.32462
G01 X-203.45613 Y-73.27910
G01 X-203.59444 Y-73.20516
G01 X-203.71565 Y-73.10567
G01 X-203.81516 Y-72.98444
G01 X-203.88910 Y-72.84613
G01 X-203.93462 Y-72.69607
G01 X-203.94999 Y-72.53999
G01 X-203.93462 Y-72.38390
G01 X-203.88910 Y-72.23384
G01 X-203.81516 Y-72.09554
G01 X-203.71565 Y-71.97430
G01 X-203.59444 Y-71.87481
G01 X-203.45613 Y-71.80087
G01 X-203.30604 Y-71.75536
G01 X-203.14999 Y-71.73999
G01 X-202.99390 Y-71.75536
G01 X-202.84384 Y-71.80087
G01 X-202.70554 Y-71.87481
G01 X-202.58430 Y-71.97430
G01 X-202.48481 Y-72.09554
G01 X-202.41087 Y-72.23384
G01 X-202.36536 Y-72.38390
G01 X-202.34999 Y-72.53999
G01 X-202.34999 Y-75.07999
G01 X-202.36536 Y-74.92390
G01 X-202.41087 Y-74.77384
G01 X-202.48481 Y-74.63554
G01 X-202.58430 Y-74.51430
G01 X-202.70554 Y-74.41481
G01 X-202.84384 Y-74.34087
G01 X-202.99390 Y-74.29536
G01 X-203.14999 Y-74.27999
G01 X-203.30604 Y-74.29536
G01 X-203.45613 Y-74.34087
G01 X-203.59444 Y-74.41481
G01 X-203.71565 Y-74.51430
G01 X-203.81516 Y-74.63554
G01 X-203.88910 Y-74.77384
G01 X-203.93462 Y-74.92390
G01 X-203.94999 Y-75.07999
G01 X-203.93462 Y-75.23607
G01 X-203.88910 Y-75.38613
G01 X-203.81516 Y-75.52444
G01 X-203.71565 Y-75.64567
G01 X-203.59444 Y-75.74516
G01 X-203.45613 Y-75.81910
G01 X-203.30604 Y-75.86462
G01 X-203.14999 Y-75.87999
G01 X-202.99390 Y-75.86462
G01 X-202.84384 Y-75.81910
G01 X-202.70554 Y-75.74516
G01 X-202.58430 Y-75.64567
G01 X-202.48481 Y-75.52444
G01 X-202.41087 Y-75.38613
G01 X-202.36536 Y-75.23607
G01 X-202.34999 Y-75.07999
G01 X-202.34999 Y-77.61999
G01 X-202.36536 Y-77.46390
G01 X-202.41087 Y-77.31384
G01 X-202.48481 Y-77.17554
G01 X-202.58430 Y-77.05430
G01 X-202.70554 Y-76.95481
G01 X-202.84384 Y-76.88087
G01 X-202.99390 Y-76.83536
G01 X-203.14999 Y-76.81999
G01 X-203.30604 Y-76.83536
G01 X-203.45613 Y-76.88087
G01 X-203.59444 Y-76.95481
G01 X-203.71565 Y-77.05430
G01 X-203.81516 Y-77.17554
G01 X-203.88910 Y-77.31384
G01 X-203.93462 Y-77.46390
G01 X-203.94999 Y-77.61999
G01 X-203.93462 Y-77.77607
G01 X-203.88910 Y-77.92613
G01 X-203.81516 Y-78.06444
G01 X-203.71565 Y-78.18567
G01 X-203.59444 Y-78.28516
G01 X-203.45613 Y-78.35910
G01 X-203.30604 Y-78.40462
G01 X-203.14999 Y-78.41999
G01 X-202.99390 Y-78.40462
G01 X-202.84384 Y-78.35910
G01 X-202.70554 Y-78.28516
G01 X-202.58430 Y-78.18567
G01 X-202.48481 Y-78.06444
G01 X-202.41087 Y-77.92613
G01 X-202.36536 Y-77.77607
G01 X-202.34999 Y-77.61999
G01 X-202.34999 Y-80.15999
G01 X-202.36536 Y-80.00390
G01 X-202.41087 Y-79.85384
G01 X-202.48481 Y-79.71554
G01 X-202.58430 Y-79.59430
G01 X-202.70554 Y-79.49481
G01 X-202.84384 Y-79.42087
G01 X-202.99390 Y-79.37536
G01 X-203.14999 Y-79.35999
G01 X-203.30604 Y-79.37536
G01 X-203.45613 Y-79.42087
G01 X-203.59444 Y-79.49481
G01 X-203.71565 Y-79.59430
G01 X-203.81516 Y-79.71554
G01 X-203.88910 Y-79.85384
G01 X-203.93462 Y-80.00390
G01 X-203.94999 Y-80.15999
G01 X-203.93462 Y-80.31607
G01 X-203.88910 Y-80.46613
G01 X-203.81516 Y-80.60444
G01 X-203.71565 Y-80.72567
G01 X-203.59444 Y-80.82516
G01 X-203.45613 Y-80.89910
G01 X-203.30604 Y-80.94462
G01 X-203.14999 Y-80.95999
G01 X-202.99390 Y-80.94462
G01 X-202.84384 Y-80.89910
G01 X-202.70554 Y-80.82516
G01 X-202.58430 Y-80.72567
G01 X-202.48481 Y-80.60444
G01 X-202.41087 Y-80.46613
G01 X-202.36536 Y-80.31607
G01 X-202.34999 Y-80.15999
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z5.00000 ( retract )

G00 X-205.34998 Y-83.61500 ( rapid move to begin. )
G01 F50.00000
( Mill infeed pass 1/1 )
G01 Z-0.04000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F100.00000
G01 X-205.34998 Y-83.61500
G01 X-205.37109 Y-83.40039
G01 X-205.43373 Y-83.19404
G01 X-205.53538 Y-83.00387
G01 X-205.67216 Y-82.83717
G01 X-205.83886 Y-82.70037
G01 X-206.02900 Y-82.59872
G01 X-206.23538 Y-82.53613
G01 X-206.44998 Y-82.51500
G01 X-206.66456 Y-82.53613
G01 X-206.87093 Y-82.59872
G01 X-207.06108 Y-82.70037
G01 X-207.22781 Y-82.83717
G01 X-207.36461 Y-83.00387
G01 X-207.46626 Y-83.19404
G01 X-207.52885 Y-83.40039
G01 X-207.54995 Y-83.61500
G01 X-207.52885 Y-83.82958
G01 X-207.46626 Y-84.03595
G01 X-207.36461 Y-84.22612
G01 X-207.22781 Y-84.39280
G01 X-207.06108 Y-84.52960
G01 X-206.87093 Y-84.63125
G01 X-206.66456 Y-84.69386
G01 X-206.44998 Y-84.71499
G01 X-206.23538 Y-84.69386
G01 X-206.02900 Y-84.63125
G01 X-205.83886 Y-84.52960
G01 X-205.67216 Y-84.39280
G01 X-205.53538 Y-84.22612
G01 X-205.43373 Y-84.03595
G01 X-205.37109 Y-83.82958
G01 X-205.34998 Y-83.61500
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z5.00000 ( retract )

G00 X-199.80999 Y-78.88999 ( rapid move to begin. )
G01 F50.00000
( Mill infeed pass 1/1 )
G01 Z-0.04000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F100.00000
G01 X-199.80999 Y-78.88999
G01 X-199.82536 Y-79.04607
G01 X-199.87087 Y-79.19613
G01 X-199.94481 Y-79.33444
G01 X-200.04430 Y-79.45567
G01 X-200.16554 Y-79.55516
G01 X-200.30384 Y-79.62910
G01 X-200.45390 Y-79.67462
G01 X-200.60999 Y-79.68999
G01 X-200.76607 Y-79.67462
G01 X-200.91613 Y-79.62910
G01 X-201.05444 Y-79.55516
G01 X-201.17567 Y-79.45567
G01 X-201.27516 Y-79.33444
G01 X-201.34910 Y-79.19613
G01 X-201.39462 Y-79.04607
G01 X-201.40999 Y-78.88999
G01 X-201.39462 Y-78.73390
G01 X-201.34910 Y-78.58384
G01 X-201.27516 Y-78.44554
G01 X-201.17567 Y-78.32430
G01 X-201.05444 Y-78.22481
G01 X-200.91613 Y-78.15087
G01 X-200.76607 Y-78.10536
G01 X-200.60999 Y-78.08999
G01 X-200.45390 Y-78.10536
G01 X-200.30384 Y-78.15087
G01 X-200.16554 Y-78.22481
G01 X-200.04430 Y-78.32430
G01 X-199.94481 Y-78.44554
G01 X-199.87087 Y-78.58384
G01 X-199.82536 Y-78.73390
G01 X-199.80999 Y-78.88999
G01 X-199.80999 Y-76.34999
G01 X-199.82536 Y-76.50607
G01 X-199.87087 Y-76.65613
G01 X-199.94481 Y-76.79444
G01 X-200.04430 Y-76.91567
G01 X-200.16554 Y-77.01516
G01 X-200.30384 Y-77.08910
G01 X-200.45390 Y-77.13462
G01 X-200.60999 Y-77.14999
G01 X-200.76607 Y-77.13462
G01 X-200.91613 Y-77.08910
G01 X-201.05444 Y-77.01516
G01 X-201.17567 Y-76.91567
G01 X-201.27516 Y-76.79444
G01 X-201.34910 Y-76.65613
G01 X-201.39462 Y-76.50607
G01 X-201.40999 Y-76.34999
G01 X-201.39462 Y-76.19390
G01 X-201.34910 Y-76.04384
G01 X-201.27516 Y-75.90554
G01 X-201.17567 Y-75.78430
G01 X-201.05444 Y-75.68481
G01 X-200.91613 Y-75.61087
G01 X-200.76607 Y-75.56536
G01 X-200.60999 Y-75.54999
G01 X-200.45390 Y-75.56536
G01 X-200.30384 Y-75.61087
G01 X-200.16554 Y-75.68481
G01 X-200.04430 Y-75.78430
G01 X-199.94481 Y-75.90554
G01 X-199.87087 Y-76.04384
G01 X-199.82536 Y-76.19390
G01 X-199.80999 Y-76.34999
G01 X-199.80999 Y-73.80999
G01 X-199.82536 Y-73.96607
G01 X-199.87087 Y-74.11613
G01 X-199.94481 Y-74.25444
G01 X-200.04430 Y-74.37567
G01 X-200.16554 Y-74.47516
G01 X-200.30384 Y-74.54910
G01 X-200.45390 Y-74.59462
G01 X-200.60999 Y-74.60999
G01 X-200.76607 Y-74.59462
G01 X-200.91613 Y-74.54910
G01 X-201.05444 Y-74.47516
G01 X-201.17567 Y-74.37567
G01 X-201.27516 Y-74.25444
G01 X-201.34910 Y-74.11613
G01 X-201.39462 Y-73.96607
G01 X-201.40999 Y-73.80999
G01 X-201.39462 Y-73.65390
G01 X-201.34910 Y-73.50384
G01 X-201.27516 Y-73.36554
G01 X-201.17567 Y-73.24430
G01 X-201.05444 Y-73.14481
G01 X-200.91613 Y-73.07087
G01 X-200.76607 Y-73.02536
G01 X-200.60999 Y-73.00999
G01 X-200.45390 Y-73.02536
G01 X-200.30384 Y-73.07087
G01 X-200.16554 Y-73.14481
G01 X-200.04430 Y-73.24430
G01 X-199.94481 Y-73.36554
G01 X-199.87087 Y-73.50384
G01 X-199.82536 Y-73.65390
G01 X-199.80999 Y-73.80999
G01 X-199.80999 Y-70.71799
G01 X-199.81476 Y-70.66961
G01 X-199.82886 Y-70.62307
G01 X-199.85177 Y-70.58020
G01 X-199.88263 Y-70.54263
G01 X-199.92020 Y-70.51177
G01 X-199.96307 Y-70.48886
G01 X-200.00961 Y-70.47476
G01 X-200.05799 Y-70.46999
G01 X-201.16198 Y-70.46999
G01 X-201.21037 Y-70.47476
G01 X-201.25690 Y-70.48886
G01 X-201.29978 Y-70.51177
G01 X-201.33734 Y-70.54263
G01 X-201.36820 Y-70.58020
G01 X-201.39111 Y-70.62307
G01 X-201.40521 Y-70.66961
G01 X-201.40999 Y-70.71799
G01 X-201.40999 Y-71.82198
G01 X-201.40521 Y-71.87037
G01 X-201.39111 Y-71.91690
G01 X-201.36820 Y-71.95977
G01 X-201.33734 Y-71.99734
G01 X-201.29978 Y-72.02820
G01 X-201.25690 Y-72.05111
G01 X-201.21037 Y-72.06521
G01 X-201.16198 Y-72.06999
G01 X-200.05799 Y-72.06999
G01 X-200.00961 Y-72.06521
G01 X-199.96307 Y-72.05111
G01 X-199.92020 Y-72.02820
G01 X-199.88263 Y-71.99734
G01 X-199.85177 Y-71.95977
G01 X-199.82886 Y-71.91690
G01 X-199.81476 Y-71.87037
G01 X-199.80999 Y-71.82198
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z5.00000 ( retract )

G00 X-146.89999 Y-81.32999 ( rapid move to begin. )
G01 F50.00000
( Mill infeed pass 1/1 )
G01 Z-0.04000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F100.00000
G01 X-146.89999 Y-81.32999
G01 X-146.91632 Y-81.49582
G01 X-146.96468 Y-81.65526
G01 X-147.04324 Y-81.80222
G01 X-147.14896 Y-81.93103
G01 X-147.27776 Y-82.03674
G01 X-147.42470 Y-82.11528
G01 X-147.58416 Y-82.16367
G01 X-147.75000 Y-82.18000
G01 X-147.91581 Y-82.16367
G01 X-148.07527 Y-82.11528
G01 X-148.22223 Y-82.03674
G01 X-148.35104 Y-81.93103
G01 X-148.45673 Y-81.80222
G01 X-148.53529 Y-81.65526
G01 X-148.58365 Y-81.49582
G01 X-148.59998 Y-81.32999
G01 X-148.58365 Y-81.16415
G01 X-148.53529 Y-81.00471
G01 X-148.45673 Y-80.85775
G01 X-148.35104 Y-80.72895
G01 X-148.22223 Y-80.62323
G01 X-148.07527 Y-80.54470
G01 X-147.91581 Y-80.49631
G01 X-147.75000 Y-80.47998
G01 X-147.58416 Y-80.49631
G01 X-147.42470 Y-80.54470
G01 X-147.27776 Y-80.62323
G01 X-147.14896 Y-80.72895
G01 X-147.04324 Y-80.85775
G01 X-146.96468 Y-81.00471
G01 X-146.91632 Y-81.16415
G01 X-146.89999 Y-81.32999
G01 X-146.89999 Y-78.78999
G01 X-146.91632 Y-78.95582
G01 X-146.96468 Y-79.11526
G01 X-147.04324 Y-79.26222
G01 X-147.14896 Y-79.39103
G01 X-147.27776 Y-79.49674
G01 X-147.42470 Y-79.57528
G01 X-147.58416 Y-79.62367
G01 X-147.75000 Y-79.64000
G01 X-147.91581 Y-79.62367
G01 X-148.07527 Y-79.57528
G01 X-148.22223 Y-79.49674
G01 X-148.35104 Y-79.39103
G01 X-148.45673 Y-79.26222
G01 X-148.53529 Y-79.11526
G01 X-148.58365 Y-78.95582
G01 X-148.59998 Y-78.78999
G01 X-148.58365 Y-78.62415
G01 X-148.53529 Y-78.46471
G01 X-148.45673 Y-78.31775
G01 X-148.35104 Y-78.18895
G01 X-148.22223 Y-78.08323
G01 X-148.07527 Y-78.00470
G01 X-147.91581 Y-77.95631
G01 X-147.75000 Y-77.93998
G01 X-147.58416 Y-77.95631
G01 X-147.42470 Y-78.00470
G01 X-147.27776 Y-78.08323
G01 X-147.14896 Y-78.18895
G01 X-147.04324 Y-78.31775
G01 X-146.96468 Y-78.46471
G01 X-146.91632 Y-78.62415
G01 X-146.89999 Y-78.78999
G01 X-146.89999 Y-76.24999
G01 X-146.91632 Y-76.41582
G01 X-146.96468 Y-76.57526
G01 X-147.04324 Y-76.72222
G01 X-147.14896 Y-76.85103
G01 X-147.27776 Y-76.95674
G01 X-147.42470 Y-77.03528
G01 X-147.58416 Y-77.08367
G01 X-147.75000 Y-77.10000
G01 X-147.91581 Y-77.08367
G01 X-148.07527 Y-77.03528
G01 X-148.22223 Y-76.95674
G01 X-148.35104 Y-76.85103
G01 X-148.45673 Y-76.72222
G01 X-148.53529 Y-76.57526
G01 X-148.58365 Y-76.41582
G01 X-148.59998 Y-76.24999
G01 X-148.58365 Y-76.08415
G01 X-148.53529 Y-75.92471
G01 X-148.45673 Y-75.77775
G01 X-148.35104 Y-75.64895
G01 X-148.22223 Y-75.54323
G01 X-148.07527 Y-75.46470
G01 X-147.91581 Y-75.41631
G01 X-147.75000 Y-75.39998
G01 X-147.58416 Y-75.41631
G01 X-147.42470 Y-75.46470
G01 X-147.27776 Y-75.54323
G01 X-147.14896 Y-75.64895
G01 X-147.04324 Y-75.77775
G01 X-146.96468 Y-75.92471
G01 X-146.91632 Y-76.08415
G01 X-146.89999 Y-76.24999
G01 X-146.89999 Y-73.70999
G01 X-146.91632 Y-73.87582
G01 X-146.96468 Y-74.03526
G01 X-147.04324 Y-74.18222
G01 X-147.14896 Y-74.31103
G01 X-147.27776 Y-74.41674
G01 X-147.42470 Y-74.49528
G01 X-147.58416 Y-74.54367
G01 X-147.75000 Y-74.56000
G01 X-147.91581 Y-74.54367
G01 X-148.07527 Y-74.49528
G01 X-148.22223 Y-74.41674
G01 X-148.35104 Y-74.31103
G01 X-148.45673 Y-74.18222
G01 X-148.53529 Y-74.03526
G01 X-148.58365 Y-73.87582
G01 X-148.59998 Y-73.70999
G01 X-148.58365 Y-73.54415
G01 X-148.53529 Y-73.38471
G01 X-148.45673 Y-73.23775
G01 X-148.35104 Y-73.10895
G01 X-148.22223 Y-73.00323
G01 X-148.07527 Y-72.92470
G01 X-147.91581 Y-72.87631
G01 X-147.75000 Y-72.85998
G01 X-147.58416 Y-72.87631
G01 X-147.42470 Y-72.92470
G01 X-147.27776 Y-73.00323
G01 X-147.14896 Y-73.10895
G01 X-147.04324 Y-73.23775
G01 X-146.96468 Y-73.38471
G01 X-146.91632 Y-73.54415
G01 X-146.89999 Y-73.70999
G01 X-146.89999 Y-71.16999
G01 X-146.91632 Y-71.33582
G01 X-146.96468 Y-71.49526
G01 X-147.04324 Y-71.64222
G01 X-147.14896 Y-71.77103
G01 X-147.27776 Y-71.87674
G01 X-147.42470 Y-71.95528
G01 X-147.58416 Y-72.00367
G01 X-147.75000 Y-72.02000
G01 X-147.91581 Y-72.00367
G01 X-148.07527 Y-71.95528
G01 X-148.22223 Y-71.87674
G01 X-148.35104 Y-71.77103
G01 X-148.45673 Y-71.64222
G01 X-148.53529 Y-71.49526
G01 X-148.58365 Y-71.33582
G01 X-148.59998 Y-71.16999
G01 X-148.58365 Y-71.00415
G01 X-148.53529 Y-70.84471
G01 X-148.45673 Y-70.69775
G01 X-148.35104 Y-70.56895
G01 X-148.22223 Y-70.46323
G01 X-148.07527 Y-70.38470
G01 X-147.91581 Y-70.33631
G01 X-147.75000 Y-70.31998
G01 X-147.58416 Y-70.33631
G01 X-147.42470 Y-70.38470
G01 X-147.27776 Y-70.46323
G01 X-147.14896 Y-70.56895
G01 X-147.04324 Y-70.69775
G01 X-146.96468 Y-70.84471
G01 X-146.91632 Y-71.00415
G01 X-146.89999 Y-71.16999
G01 X-146.89999 Y-67.77998
G01 X-148.59998 Y-67.77998
G01 X-148.59998 Y-69.48000
G01 X-146.89999 Y-69.48000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z5.00000 ( retract )

G00 X-112.24999 Y-70.12843 ( rapid move to begin. )
G01 F50.00000
( Mill infeed pass 1/1 )
G01 Z-0.04000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F100.00000
G01 X-112.24999 Y-70.12843
G01 X-112.24999 Y-69.62844
G01 X-112.26919 Y-69.43334
G01 X-112.32612 Y-69.24573
G01 X-112.42561 Y-69.06420
G01 X-112.32612 Y-68.88267
G01 X-112.26919 Y-68.69509
G01 X-112.24999 Y-68.49999
G01 X-112.24999 Y-67.99999
G01 X-112.26919 Y-67.80489
G01 X-112.32612 Y-67.61731
G01 X-112.41852 Y-67.44442
G01 X-112.54288 Y-67.29288
G01 X-112.69442 Y-67.16852
G01 X-112.86731 Y-67.07612
G01 X-113.05489 Y-67.01920
G01 X-113.24999 Y-66.99999
G01 X-113.44509 Y-67.01920
G01 X-113.63267 Y-67.07612
G01 X-113.80556 Y-67.16852
G01 X-113.95710 Y-67.29288
G01 X-114.08146 Y-67.44442
G01 X-114.17386 Y-67.61731
G01 X-114.23078 Y-67.80489
G01 X-114.24999 Y-67.99999
G01 X-114.24999 Y-68.49999
G01 X-114.23078 Y-68.69509
G01 X-114.17386 Y-68.88267
G01 X-114.07437 Y-69.06420
G01 X-114.17386 Y-69.24573
G01 X-114.23078 Y-69.43334
G01 X-114.24999 Y-69.62844
G01 X-114.24999 Y-70.12843
G01 X-114.23078 Y-70.32351
G01 X-114.17386 Y-70.51111
G01 X-114.08146 Y-70.68398
G01 X-113.95710 Y-70.83552
G01 X-113.80556 Y-70.95990
G01 X-113.63267 Y-71.05231
G01 X-113.44509 Y-71.10920
G01 X-113.24999 Y-71.12843
G01 X-113.05489 Y-71.10920
G01 X-112.86731 Y-71.05231
G01 X-112.69442 Y-70.95990
G01 X-112.54288 Y-70.83552
G01 X-112.41852 Y-70.68398
G01 X-112.32612 Y-70.51111
G01 X-112.26919 Y-70.32351
G01 X-112.24999 Y-70.12843

G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z5.000000 ( retract )

G04 P1.000000
M9 ( Coolant off. )