( pcb2gcode 2.5.0 )
( Software-independent Gcode )

M3 S24000
G4 P10
F400 
G90 
G21
G64 P0.08
G20

G94 ( Millimeters per minute feed rate. )
G21 ( Units == Millimeters. )

G90 ( Absolute coordinates. )
G00 S24000 ( RPM spindle speed. )
G64 P0.01016 ( set maximum deviation from commanded toolpath )
G01 F250.00000 ( Feedrate. )


G00 Z5.00000 (Retract to tool change height)
T1
M5      (Spindle stop.)
G04 P1.00000 (Wait for spindle to stop)
(MSG, Change tool bit to cutter diameter 3.17500mm)
M6      (Tool change.)
M0      (Temporary machine stop.)
M3 ( Spindle on clockwise. )
G04 P1.00000 (Wait for spindle to get up to speed)
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z5.00000 ( retract )

G00 X-6.58746 Y-45.20032 ( rapid move to begin. )
G01 Z-0.18333 F125.00000 ( plunge. )
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F250.00000
G01 X-6.58746 Y-21.93766
G00 Z5.00000
G01 X-6.58746 Y-18.26266
G01 Z-0.18333 F125.00000
G01 F250.00000
G01 X-6.58746 Y4.99999
G01 X-6.55698 Y5.30969
G01 X-6.46661 Y5.60748
G01 X-6.31993 Y5.88195
G01 X-6.12252 Y6.12252
G01 X-5.88195 Y6.31993
G01 X-5.60748 Y6.46661
G01 X-5.30969 Y6.55698
G01 X-4.99999 Y6.58746
G01 X45.39899 Y6.58746
G01 X45.70870 Y6.55698
G01 X46.00649 Y6.46661
G01 X46.28096 Y6.31993
G01 X46.52152 Y6.12252
G01 X46.71893 Y5.88195
G01 X46.86564 Y5.60748
G01 X46.95599 Y5.30969
G01 X46.98649 Y4.99999
G01 X46.98649 Y-18.26266
G00 Z5.00000
G01 X46.98649 Y-21.93766
G01 Z-0.18333 F125.00000
G01 F250.00000
G01 X46.98649 Y-45.20032
G01 X46.95599 Y-45.51002
G01 X46.86564 Y-45.80781
G01 X46.71893 Y-46.08228
G01 X46.52152 Y-46.32284
G01 X46.28096 Y-46.52025
G01 X46.00649 Y-46.66696
G01 X45.70870 Y-46.75731
G01 X45.39899 Y-46.78782
G01 X-4.99999 Y-46.78782
G01 X-5.30969 Y-46.75731
G01 X-5.60748 Y-46.66696
G01 X-5.88195 Y-46.52025
G01 X-6.12252 Y-46.32284
G01 X-6.31993 Y-46.08228
G01 X-6.46661 Y-45.80781
G01 X-6.55698 Y-45.51002
G01 X-6.58746 Y-45.20032
G01 Z-0.36667 F125.00000 ( plunge. )
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F250.00000
G01 X-6.58746 Y-21.93766
G00 Z5.00000
G01 X-6.58746 Y-18.26266
G01 Z-0.36667 F125.00000
G01 F250.00000
G01 X-6.58746 Y4.99999
G01 X-6.55698 Y5.30969
G01 X-6.46661 Y5.60748
G01 X-6.31993 Y5.88195
G01 X-6.12252 Y6.12252
G01 X-5.88195 Y6.31993
G01 X-5.60748 Y6.46661
G01 X-5.30969 Y6.55698
G01 X-4.99999 Y6.58746
G01 X45.39899 Y6.58746
G01 X45.70870 Y6.55698
G01 X46.00649 Y6.46661
G01 X46.28096 Y6.31993
G01 X46.52152 Y6.12252
G01 X46.71893 Y5.88195
G01 X46.86564 Y5.60748
G01 X46.95599 Y5.30969
G01 X46.98649 Y4.99999
G01 X46.98649 Y-18.26266
G00 Z5.00000
G01 X46.98649 Y-21.93766
G01 Z-0.36667 F125.00000
G01 F250.00000
G01 X46.98649 Y-45.20032
G01 X46.95599 Y-45.51002
G01 X46.86564 Y-45.80781
G01 X46.71893 Y-46.08228
G01 X46.52152 Y-46.32284
G01 X46.28096 Y-46.52025
G01 X46.00649 Y-46.66696
G01 X45.70870 Y-46.75731
G01 X45.39899 Y-46.78782
G01 X-4.99999 Y-46.78782
G01 X-5.30969 Y-46.75731
G01 X-5.60748 Y-46.66696
G01 X-5.88195 Y-46.52025
G01 X-6.12252 Y-46.32284
G01 X-6.31993 Y-46.08228
G01 X-6.46661 Y-45.80781
G01 X-6.55698 Y-45.51002
G01 X-6.58746 Y-45.20032
G01 Z-0.55000 F125.00000 ( plunge. )
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F250.00000
G01 X-6.58746 Y-21.93766
G00 Z5.00000
G01 X-6.58746 Y-18.26266
G01 Z-0.55000 F125.00000
G01 F250.00000
G01 X-6.58746 Y4.99999
G01 X-6.55698 Y5.30969
G01 X-6.46661 Y5.60748
G01 X-6.31993 Y5.88195
G01 X-6.12252 Y6.12252
G01 X-5.88195 Y6.31993
G01 X-5.60748 Y6.46661
G01 X-5.30969 Y6.55698
G01 X-4.99999 Y6.58746
G01 X45.39899 Y6.58746
G01 X45.70870 Y6.55698
G01 X46.00649 Y6.46661
G01 X46.28096 Y6.31993
G01 X46.52152 Y6.12252
G01 X46.71893 Y5.88195
G01 X46.86564 Y5.60748
G01 X46.95599 Y5.30969
G01 X46.98649 Y4.99999
G01 X46.98649 Y-18.26266
G00 Z5.00000
G01 X46.98649 Y-21.93766
G01 Z-0.55000 F125.00000
G01 F250.00000
G01 X46.98649 Y-45.20032
G01 X46.95599 Y-45.51002
G01 X46.86564 Y-45.80781
G01 X46.71893 Y-46.08228
G01 X46.52152 Y-46.32284
G01 X46.28096 Y-46.52025
G01 X46.00649 Y-46.66696
G01 X45.70870 Y-46.75731
G01 X45.39899 Y-46.78782
G01 X-4.99999 Y-46.78782
G01 X-5.30969 Y-46.75731
G01 X-5.60748 Y-46.66696
G01 X-5.88195 Y-46.52025
G01 X-6.12252 Y-46.32284
G01 X-6.31993 Y-46.08228
G01 X-6.46661 Y-45.80781
G01 X-6.55698 Y-45.51002
G01 X-6.58746 Y-45.20032
G01 Z-0.73333 F125.00000 ( plunge. )
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F250.00000
G01 X-6.58746 Y-21.93766
G00 Z5.00000
G01 X-6.58746 Y-18.26266
G01 Z-0.73333 F125.00000
G01 F250.00000
G01 X-6.58746 Y4.99999
G01 X-6.55698 Y5.30969
G01 X-6.46661 Y5.60748
G01 X-6.31993 Y5.88195
G01 X-6.12252 Y6.12252
G01 X-5.88195 Y6.31993
G01 X-5.60748 Y6.46661
G01 X-5.30969 Y6.55698
G01 X-4.99999 Y6.58746
G01 X45.39899 Y6.58746
G01 X45.70870 Y6.55698
G01 X46.00649 Y6.46661
G01 X46.28096 Y6.31993
G01 X46.52152 Y6.12252
G01 X46.71893 Y5.88195
G01 X46.86564 Y5.60748
G01 X46.95599 Y5.30969
G01 X46.98649 Y4.99999
G01 X46.98649 Y-18.26266
G00 Z5.00000
G01 X46.98649 Y-21.93766
G01 Z-0.73333 F125.00000
G01 F250.00000
G01 X46.98649 Y-45.20032
G01 X46.95599 Y-45.51002
G01 X46.86564 Y-45.80781
G01 X46.71893 Y-46.08228
G01 X46.52152 Y-46.32284
G01 X46.28096 Y-46.52025
G01 X46.00649 Y-46.66696
G01 X45.70870 Y-46.75731
G01 X45.39899 Y-46.78782
G01 X-4.99999 Y-46.78782
G01 X-5.30969 Y-46.75731
G01 X-5.60748 Y-46.66696
G01 X-5.88195 Y-46.52025
G01 X-6.12252 Y-46.32284
G01 X-6.31993 Y-46.08228
G01 X-6.46661 Y-45.80781
G01 X-6.55698 Y-45.51002
G01 X-6.58746 Y-45.20032
G01 Z-0.91667 F125.00000 ( plunge. )
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F250.00000
G01 X-6.58746 Y-21.93766
G00 Z5.00000
G01 X-6.58746 Y-18.26266
G01 Z-0.91667 F125.00000
G01 F250.00000
G01 X-6.58746 Y4.99999
G01 X-6.55698 Y5.30969
G01 X-6.46661 Y5.60748
G01 X-6.31993 Y5.88195
G01 X-6.12252 Y6.12252
G01 X-5.88195 Y6.31993
G01 X-5.60748 Y6.46661
G01 X-5.30969 Y6.55698
G01 X-4.99999 Y6.58746
G01 X45.39899 Y6.58746
G01 X45.70870 Y6.55698
G01 X46.00649 Y6.46661
G01 X46.28096 Y6.31993
G01 X46.52152 Y6.12252
G01 X46.71893 Y5.88195
G01 X46.86564 Y5.60748
G01 X46.95599 Y5.30969
G01 X46.98649 Y4.99999
G01 X46.98649 Y-18.26266
G00 Z5.00000
G01 X46.98649 Y-21.93766
G01 Z-0.91667 F125.00000
G01 F250.00000
G01 X46.98649 Y-45.20032
G01 X46.95599 Y-45.51002
G01 X46.86564 Y-45.80781
G01 X46.71893 Y-46.08228
G01 X46.52152 Y-46.32284
G01 X46.28096 Y-46.52025
G01 X46.00649 Y-46.66696
G01 X45.70870 Y-46.75731
G01 X45.39899 Y-46.78782
G01 X-4.99999 Y-46.78782
G01 X-5.30969 Y-46.75731
G01 X-5.60748 Y-46.66696
G01 X-5.88195 Y-46.52025
G01 X-6.12252 Y-46.32284
G01 X-6.31993 Y-46.08228
G01 X-6.46661 Y-45.80781
G01 X-6.55698 Y-45.51002
G01 X-6.58746 Y-45.20032
G01 Z-1.10000 F125.00000 ( plunge. )
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F250.00000
G01 X-6.58746 Y-21.93766
G00 Z5.00000
G01 X-6.58746 Y-18.26266
G01 Z-1.10000 F125.00000
G01 F250.00000
G01 X-6.58746 Y4.99999
G01 X-6.55698 Y5.30969
G01 X-6.46661 Y5.60748
G01 X-6.31993 Y5.88195
G01 X-6.12252 Y6.12252
G01 X-5.88195 Y6.31993
G01 X-5.60748 Y6.46661
G01 X-5.30969 Y6.55698
G01 X-4.99999 Y6.58746
G01 X45.39899 Y6.58746
G01 X45.70870 Y6.55698
G01 X46.00649 Y6.46661
G01 X46.28096 Y6.31993
G01 X46.52152 Y6.12252
G01 X46.71893 Y5.88195
G01 X46.86564 Y5.60748
G01 X46.95599 Y5.30969
G01 X46.98649 Y4.99999
G01 X46.98649 Y-18.26266
G00 Z5.00000
G01 X46.98649 Y-21.93766
G01 Z-1.10000 F125.00000
G01 F250.00000
G01 X46.98649 Y-45.20032
G01 X46.95599 Y-45.51002
G01 X46.86564 Y-45.80781
G01 X46.71893 Y-46.08228
G01 X46.52152 Y-46.32284
G01 X46.28096 Y-46.52025
G01 X46.00649 Y-46.66696
G01 X45.70870 Y-46.75731
G01 X45.39899 Y-46.78782
G01 X-4.99999 Y-46.78782
G01 X-5.30969 Y-46.75731
G01 X-5.60748 Y-46.66696
G01 X-5.88195 Y-46.52025
G01 X-6.12252 Y-46.32284
G01 X-6.31993 Y-46.08228
G01 X-6.46661 Y-45.80781
G01 X-6.55698 Y-45.51002
G01 X-6.58746 Y-45.20032
G01 Z-1.28333 F125.00000 ( plunge. )
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F250.00000
G01 X-6.58746 Y-21.93766
G00 Z5.00000
G01 X-6.58746 Y-18.26266
G01 Z-1.28333 F125.00000
G01 F250.00000
G01 X-6.58746 Y4.99999
G01 X-6.55698 Y5.30969
G01 X-6.46661 Y5.60748
G01 X-6.31993 Y5.88195
G01 X-6.12252 Y6.12252
G01 X-5.88195 Y6.31993
G01 X-5.60748 Y6.46661
G01 X-5.30969 Y6.55698
G01 X-4.99999 Y6.58746
G01 X45.39899 Y6.58746
G01 X45.70870 Y6.55698
G01 X46.00649 Y6.46661
G01 X46.28096 Y6.31993
G01 X46.52152 Y6.12252
G01 X46.71893 Y5.88195
G01 X46.86564 Y5.60748
G01 X46.95599 Y5.30969
G01 X46.98649 Y4.99999
G01 X46.98649 Y-18.26266
G00 Z5.00000
G01 X46.98649 Y-21.93766
G01 Z-1.28333 F125.00000
G01 F250.00000
G01 X46.98649 Y-45.20032
G01 X46.95599 Y-45.51002
G01 X46.86564 Y-45.80781
G01 X46.71893 Y-46.08228
G01 X46.52152 Y-46.32284
G01 X46.28096 Y-46.52025
G01 X46.00649 Y-46.66696
G01 X45.70870 Y-46.75731
G01 X45.39899 Y-46.78782
G01 X-4.99999 Y-46.78782
G01 X-5.30969 Y-46.75731
G01 X-5.60748 Y-46.66696
G01 X-5.88195 Y-46.52025
G01 X-6.12252 Y-46.32284
G01 X-6.31993 Y-46.08228
G01 X-6.46661 Y-45.80781
G01 X-6.55698 Y-45.51002
G01 X-6.58746 Y-45.20032
G01 Z-1.46667 F125.00000 ( plunge. )
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F250.00000
G01 X-6.58746 Y-21.93766
G00 Z5.00000
G01 X-6.58746 Y-18.26266
G01 Z-1.46667 F125.00000
G01 F250.00000
G01 X-6.58746 Y4.99999
G01 X-6.55698 Y5.30969
G01 X-6.46661 Y5.60748
G01 X-6.31993 Y5.88195
G01 X-6.12252 Y6.12252
G01 X-5.88195 Y6.31993
G01 X-5.60748 Y6.46661
G01 X-5.30969 Y6.55698
G01 X-4.99999 Y6.58746
G01 X45.39899 Y6.58746
G01 X45.70870 Y6.55698
G01 X46.00649 Y6.46661
G01 X46.28096 Y6.31993
G01 X46.52152 Y6.12252
G01 X46.71893 Y5.88195
G01 X46.86564 Y5.60748
G01 X46.95599 Y5.30969
G01 X46.98649 Y4.99999
G01 X46.98649 Y-18.26266
G00 Z5.00000
G01 X46.98649 Y-21.93766
G01 Z-1.46667 F125.00000
G01 F250.00000
G01 X46.98649 Y-45.20032
G01 X46.95599 Y-45.51002
G01 X46.86564 Y-45.80781
G01 X46.71893 Y-46.08228
G01 X46.52152 Y-46.32284
G01 X46.28096 Y-46.52025
G01 X46.00649 Y-46.66696
G01 X45.70870 Y-46.75731
G01 X45.39899 Y-46.78782
G01 X-4.99999 Y-46.78782
G01 X-5.30969 Y-46.75731
G01 X-5.60748 Y-46.66696
G01 X-5.88195 Y-46.52025
G01 X-6.12252 Y-46.32284
G01 X-6.31993 Y-46.08228
G01 X-6.46661 Y-45.80781
G01 X-6.55698 Y-45.51002
G01 X-6.58746 Y-45.20032
G01 Z-1.65000 F125.00000 ( plunge. )
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F250.00000
G01 X-6.58746 Y-21.93766
G00 Z5.00000
G01 X-6.58746 Y-18.26266
G01 Z-1.65000 F125.00000
G01 F250.00000
G01 X-6.58746 Y4.99999
G01 X-6.55698 Y5.30969
G01 X-6.46661 Y5.60748
G01 X-6.31993 Y5.88195
G01 X-6.12252 Y6.12252
G01 X-5.88195 Y6.31993
G01 X-5.60748 Y6.46661
G01 X-5.30969 Y6.55698
G01 X-4.99999 Y6.58746
G01 X45.39899 Y6.58746
G01 X45.70870 Y6.55698
G01 X46.00649 Y6.46661
G01 X46.28096 Y6.31993
G01 X46.52152 Y6.12252
G01 X46.71893 Y5.88195
G01 X46.86564 Y5.60748
G01 X46.95599 Y5.30969
G01 X46.98649 Y4.99999
G01 X46.98649 Y-18.26266
G00 Z5.00000
G01 X46.98649 Y-21.93766
G01 Z-1.65000 F125.00000
G01 F250.00000
G01 X46.98649 Y-45.20032
G01 X46.95599 Y-45.51002
G01 X46.86564 Y-45.80781
G01 X46.71893 Y-46.08228
G01 X46.52152 Y-46.32284
G01 X46.28096 Y-46.52025
G01 X46.00649 Y-46.66696
G01 X45.70870 Y-46.75731
G01 X45.39899 Y-46.78782
G01 X-4.99999 Y-46.78782
G01 X-5.30969 Y-46.75731
G01 X-5.60748 Y-46.66696
G01 X-5.88195 Y-46.52025
G01 X-6.12252 Y-46.32284
G01 X-6.31993 Y-46.08228
G01 X-6.46661 Y-45.80781
G01 X-6.55698 Y-45.51002
G01 X-6.58746 Y-45.20032

G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z5.000000 ( retract )

G0 Z1; up up up
M30

M5 ( Spindle off. )
G04 P1.000000
M9 ( Coolant off. )
M2 ( Program end. )